| | File Name  | Uploaded By | Size | Downloads | Comments | Rating | Last Updated | Last Comment |
 | Accessorizer 0.95 RC  | pruss | 85.43 Kb | 8465 | 150 |  |
12-22-2008 09:25 AM  |
03-17-2009 01:32 PM |
| Accessorizer 0.95 RC
USE AT YOUR OWN RISK. SEE FULL LICENSE IN license.txt
MAKE A FULL BACKUP (ideally on a card) BEFORE USING.
THIS IS BETA TEST SOFTWARE.
Accessorizer is a unique utility that takes almost
any application or control panel and creates a
Desk Accessory (DA) that launches it on top of the
current application (and lets you come back to it
when done), assuming you have enough memory.
Accessorizer works on PalmOS 5.x.
A DA is a special applet that can be run on top of
another application, by use of a DA launcher. The nice
thing about a DA is that it doesn't force you to exit
your previous application. Thus, a notepad DA would let
you make notes while inside a web browser, and then come
right back to the web browser. There are a lot of DAs
that do lots of things, but DA afficionados always want
more, and Accessorizer can do such things as produce a
DA to calibrate your digitizer (just generate a DA for
the Digitizer control panel), view your contacts (just
generate a DA for your Contacts application), and so on.
INSTRUCTIONS
1. Install Accessorizer.prc.
2. Run Accessorizer. There may be a lengthy pause
when you first run it, and a somewhat shorter one
when you generate a DA.
3. Select an application.
4. Press "Generate".
5. Install your new DA in your DA launcher.
If an application does not show up in the list, that's
because either Accessorizer can't create a DA for it,
or it has already created a DA for it.
Note that you need to have sufficient memory to launch
one application on top of another. Not all applications
will be compatible.
SUGGESTIONS
You might want to download MetaDA from Palmgear.com. MetaDA is a DA that
pops up a list of all your other DAs. This way, all you need to do is to
assign MetaDA to an action or put it in a favorites list, and you can
then access all your other DAs.
Some applications that it might be nice to Accessorize include:
- Calendar
- Tasks
- Contacts
- Calculator
- Digitizer
FOR UPGRADE AND UNINSTALL DIRECTIONS, SEE readme.txt
| |
| Alert Hack 2.0 | RaNo | 9.06 Kb | 40 | none |  |
09-14-2008 07:51 AM | none |
Alert Hack | Alert Hack 2.0
There are 4 types of alerts:
- Information
- Confirmation
- Warning
- Error
Using RNS:: Alert Hack you can set colors for each of them. You can set the colors of:
- borders
- backgrounds
- texts
- buttons
You can use RNS:: Alert Hack in cooperation with RNS:: Butterfly to change ANY colors of the Palm OS user interface!
| |
| AudibleRMC for Clie | pruss | 8.40 Kb | 84 | none | |
07-31-2005 01:01 PM | none |
| AudibleRMC for Clie
Audible Player on Clie devices does not support the keys on the volume control. This YAHM hack fixes this oversight. Requires YAHM (yahm.palmoid.com) together with Audible Player for Clie OS 5 or for palmOne (with MCA). Might work on OS 4 Clies.
Updates:
Version 0.10: FF/Rew work better.
Version 0.00: Initial release.
| |
| Auto-Off+ 2.42 | Adelphi | 50.06 Kb | 164 | 5 | |
12-31-2008 03:18 AM |
10-30-2008 11:48 AM |
desk accessory (TX/TG) | Auto-Off+ 2.42
TX compatible Desk Accessory.
(Also clie TG50)
Displays battery level, date, time, internal external memory, allows user to select auto-off time, function associated with the ronamtic-stroke plus 4 quick access buttons for soft-reset, prefs, turn-off and lock, turn off.
enjoy 
version:
2.3 - fixed error when closing battery/memory dialogues.
- ammended 'about' tSTR.
2.4 - fixed font bug
2.41 - re-fixed font bug(ntft's loading from resource instead of executable)
2.42 - fixed bug with border showing when 'Palm Revolt' installed
- included DALauncher in zip package
2.42(b0125) - fixed end of year error
| |
| AutoNumLock for Treo/Centro 1.00b1 | pruss | 4.39 Kb | 209 | none | |
07-16-2008 08:34 AM | none |
| AutoNumLock for Treo/Centro 1.00b1
This is a YAHM-based hack for Treo/Centro devices (get yahm from yahm.palmoid.com) that aids in the input of numbers by activating a temporary numlock while a number is being entered.
More precisely, if you press OPTION, then input $, euro, pound (if your keyboard has euro or pound), #, + or any digit, you get a numlock that lasts until you enter something other than $, euro, pound, +, -, comma, period, colon or a digit.
Thus, to enter "I owe you $12.44. I'll pay you tomorrow", you type "I owe you " as usual. Then you press the OPTION key, and then press the $ (i.e., the H key). Then you type "12.44." without using any shift keys. Then you press the space bar. As soon as you press the space bar, the temporary numlock will disappear, and you can type "I'll pay you tomorrow" as usual.
With the standard Treo method of entering numbers, you would either have to hold OPTION while typing all of $12.44, which would be a nuisance, or you would have to press OPTION twice before $12.44 to switch to optlock mode, and then press OPTION again after $12.44, which would be two more keystrokes than AutoNumLock involves.
| |
| BigChunk hack -- extend OS to enable memory chunks bigger than 64K | pruss | 748 b | 174 | none | |
03-29-2008 10:55 PM | none |
| BigChunk hack -- extend OS to enable memory chunks bigger than 64K
USE AT YOUR OWN RISK. PUBLIC DOMAIN CODE WITH NO WARRANTY.
This YAHM hack has very limited uses, and if you have UDMH, you already have this functionality. What it does is hack the OS's memory allocation API, in a very simple way, to enable the allocation of chunks greater than or equal to 64K in size. This allows databases with chunks greater than or equal to 64K in size to be handled via standard Palm OS APIs (but NOT hotsync). Some ROM databases are like that, and on rare occasions (the only one I know is RoadLingua with a modified awmakerc) it is possible to generate an application database that overflows 64K in a resource/record. Of course the application may crash on such a resource/record due to pointer wraparound, but that's your risk.
This is designed for OS 5.x, but may work on OS 4 as well.
You might wonder why one would bother doing this. Well, one reason is that I have a RoadLingua database like this. Another is that it lets you copy databases with large resources, e.g., certain skin databases, to and from flash cards.
| |
| BorderDA - DA to toggle 2 pixel border on TX / LifeDrive 1.01 | pruss | 1.32 Kb | 288 | 4 | |
01-03-2008 01:54 PM |
07-21-2009 01:10 PM |
| BorderDA - DA to toggle 2 pixel border on TX / LifeDrive 1.01
This requires a DA launcher and is a public domain DA to toggle the two pixel white border on the TX / LifeDrive (maybe some other newer devices, too). USE AT YOUR OWN RISK. Includes source code.
| |
| Capitalizer 1.60 | pruss | 0 b | 315 | 3 | |
10-01-2004 09:53 PM |
06-10-2008 02:44 AM |
| Capitalizer 1.60
A number of different functions for OS 5 units:- for Graffiti 1 units: capitalize by crossing middle line and punctuate by writing in upper right numeric area
- for Clie NX/NZ units: a number of nice keyboard controls, such as alt+letter to tap a button starting with the letter, or ctrl+r to hide the status bar
- for all units: use tab key to send command stroke
- for many units: sticky keys support
You can pick and choose what functionality you want.
| |
| Clipboard DAs | pruss | 1.27 Kb | 284 | 1 |  |
03-13-2008 05:48 PM |
03-13-2008 08:47 PM |
| Clipboard DAs
These Desk Accessories implement copy, cut and paste. Handy for launching via a DA launcher. They also extend the OS's 1K limit on copy and cut.
| |
| ClipDumpDA | pruss | 786 b | 133 | none | |
01-19-2009 08:57 AM | none |
| ClipDumpDA
ClipDump dumps the contents of the clipboard to a .txt file in the root directory of your flash card.
| |
| DA List 1.00 | pruss | 3.74 Kb | 149 | none | |
08-20-2008 10:39 AM | none |
| DA List 1.00
DA List is a simple application that lists all your Desk Accessories and lets you launch one (or you can exit by tapping outside the list).
While normally DAs are meant to be launched on top of other applications, there may be times when one just wants to run a DA as if it were a normal application, and DA List is the solution.
DA List will order the DAs so that the highlighted one is the most recently launched DA. (DA List shares its list of most recently launched DAs with three other DA launching utilities: myKbd/mySkin, MetaDA and FastLaunch.)
| |
| daTimer | martinloat | 2.46 Kb | 104 | none | |
09-03-2008 07:31 AM | none |
| daTimer
This DA was in danger of disappearing altogether. This copy was retrieved from an archive of the author, Katsuhiro Endo's "fatal-error.com" website and posted here as unsupported "abandonware" last update 7/6/1999 
The ReadMe is in Japanese.
This is just a timer with snooze.
| |
| DIA DA | pruss | 1.15 Kb | 269 | 7 | |
11-19-2006 09:14 AM |
08-24-2007 08:02 PM |
| DIA DA
This Desk Accessory toggles the DIA.
| |
| DriveModeDA | pruss | 227 b | 999 | 6 | |
01-26-2007 10:17 AM |
08-24-2009 08:14 PM |
| DriveModeDA
This is a Desk Accessory to use Drive Mode (on palmOne units equipped with it) or MS Import (on Sony Clie units equipped with it) while another application is running. (The Clie version is completely untested, and I suspect will typically exit the current app on termination.) USE AT YOUR OWN RISK. PUBLIC DOMAIN INCLUDING SOURCE CODE.
NOTE: Removed by developer pending bug fix.
| |
| Fitaly Skin Load for TX | pruss | 34.91 Kb | 236 | 1 | |
01-11-2006 10:20 PM |
09-23-2009 09:53 PM |
| Fitaly Skin Load for TX
Fitaly has been discontinued for Palm OS. However, a lot of users would like to use it on the Palm TX. Fortunately the T3/T5/LifeDrive version of FitalyVirtual works fine on the Palm TX, except it is unable to display the "skin", i.e., the Fitaly keyboard. FitalySkinLoad remedies this problem and thereby allows you to use Fitaly on the TX. FitalySkinLoad is unsupported software and Fitaly is not supported on the Palm TX.
To use this, you also need to get your own copy of FitalyVirtualT3 from TextWare Solutions. You also need to read readme.txt before using.
This utility provides another handy function for T5, LifeDrive and TX users. Occasionally installing an older program will carry along with it the T3 compatibility libraries which cause the input area to disappear on the T5, LD and TX. Running FitalySkinLoad (without selecting any of its functions) restores that input area.
Furthermore, mySkin users will be pleased to note that as soon as FitalySkinLoad is installed, a skin named "Fitaly Skin" will appear in mySkin. This can be loaded or merged by mySkin instead of using FitalySkinLoad in order to support Fitaly on the TX. In fact, you can then delete FitalySkinLoad.
| |
All times are GMT -5. The time now is 07:20 PM.
