1src Forums - Piscal Viewer on the NX

03-26-2003, 11:37 AM

#31

NXOwner

Guest

Posts: n/a

Quote:

Originally posted by dúnadan
picsel viewer lets you view (not edit) microsoft office files without converting them to another format. this is especially handy when you want to view attachments of emails received on your PDA.

here is a temporary link to the files. it will expire in 1-2 hours:

click here

here are the directions:

1) backup your CLIE. many people have been rewarded for fine efforts with a hard reset.

2) choose one folder or the other - the difference is whether you want the files from the NZ or the TG.

3) use MS Import to put the files on your memory stick.

a) if you want to run picsel from your MS, install PowerRun, then go to step 4

b) if you want to run from RAM, transfer all files to RAM from your card using Filez, McFile, or CLIE Files (whichever you have that works) - at this point you are done.

4) create a directory /PALM/Programs/PowerRUN/Picsel on your MS.  the easiest way to do this is by using MSImport to access your MS and then using right-click - new - folder to create a folder called "picsel" within a folder called "powerrun" etc.

5) put all the files within the directory created in step 4.

6) open PowerRun, tap on option - update shortcuts

that ought to do it.  remember, step 1 is the most important!

Thanks a lot, dúnadan! I tried and it works! Now I can stop my trial version of Repligo.

03-26-2003, 11:40 AM	#32
ragermac Guest Posts: n/a	It is not working for me. I followed instruction to install on my memory card. but it get No memory left on Palm internal to load application from memory card Can't launch application/error code=0x0201

03-26-2003, 11:45 AM	#33
mdharris Just another Member Join Date: Nov 2002 Location: San Diego, CA Posts: 178	Thank you dúnadan I assume I will not need to post a link tonight for anyone or send emails. Thanks dunadan for the quick response in posting this. I would recomend to everyone who does this to make sure you do a BACKUP. This program does work great but can be buggy. Now I will wait for the debate between RepliGo and Picsel. 8) __________________ mdharris NX70V "Does Not Play Well With Others" "Hackers Have Kernel Knowledge"

03-26-2003, 12:00 PM	#34
Badandy Senior Member Join Date: Nov 2002 Posts: 359	I have a problem. I loaded it like EVERYTHING you said, and it is on my Clie beautifully. I put all the files in the right folder. Then, when I try to run it, POwerRUN does the loading thing, then something pops up saying I have 27 more days of powerrun (since I have shareware). i click OK and it just goes back to the main screen. it just wont open. I guess I will try putting it on internal, but what is the problem?

03-26-2003, 12:02 PM	#35
Badandy Senior Member Join Date: Nov 2002 Posts: 359	OK< just tried moving it to internal, and when I click it, it just goes back the main screen. It wont open even though I see it,,, I guess I will redo it, and see if it will workl.

03-26-2003, 12:08 PM	#36
intruder Member Join Date: Jan 2003 Location: El Salvador Posts: 84	can't copy files to ram with CLIE files... trying with mcfile now

03-26-2003, 12:09 PM	#37
dúnadan Asclepiada Join Date: Dec 2001 Posts: 139	i don't have enough room on my site to keep this there. hopefully hans or someone else will post another link soon, because i will have to remove the files shortly! __________________ dúnadan Current PDA: Tungsten\|C Wife's PDA: TG50 www.PDAAvenue.com* A community where users of all kinds of PDAs interact on the same boards.

03-26-2003, 12:13 PM	#38
dúnadan Asclepiada Join Date: Dec 2001 Posts: 139	those of you for whom it is working, which app are you using to move the files? which set of files are you using (TG or NZ)? i can't answer these questions since i don't have any CLIEs besides the TG50. __________________ dúnadan Current PDA: Tungsten\|C Wife's PDA: TG50 www.PDAAvenue.com* A community where users of all kinds of PDAs interact on the same boards.

03-26-2003, 12:14 PM	#39
Badandy Senior Member Join Date: Nov 2002 Posts: 359	I loaded the TG one onto the Clie and it still didnt work in powerrun. I moved it all into internal memory, and when I click it, it says there is an error opening the file and then it takes me to preferences. I also cant delete it. If I try to delete it with Clie Files it says it is a read only file.

03-26-2003, 12:17 PM	#40
Badandy Senior Member Join Date: Nov 2002 Posts: 359	I just hard reset and restored. Thanx for telling me to backup. very helpful. Any ideas?

03-26-2003, 12:18 PM	#41
mdharris Just another Member Join Date: Nov 2002 Location: San Diego, CA Posts: 178	I will post a link tonight for whoever does not have it. The directions listed above are the correct way of doing the install. I would recomend just using powerrun and keeping the files on MS. Make sure you create a directory as staed above using ms import then move the files (4 of them) to that directory. Goto powerrun and select Picsel and you should be up and running. __________________ mdharris NX70V "Does Not Play Well With Others" "Hackers Have Kernel Knowledge"

03-26-2003, 12:19 PM	#42
Badandy Senior Member Join Date: Nov 2002 Posts: 359	but i still want this program!

03-26-2003, 12:24 PM	#43
intruder Member Join Date: Jan 2003 Location: El Salvador Posts: 84	mcfile worked now i have picsel viewer on my nx!!!! something I wanted bad since I knew about it

03-26-2003, 12:26 PM	#44
Badandy Senior Member Join Date: Nov 2002 Posts: 359	WOOOHOOOO!!!!! I just reinstalled everything and it is working perfectly!!!!!! This is great! Thanx a lot mdharris

03-26-2003, 12:29 PM

#45

KCoram

Member

Join Date: Feb 2003

Posts: 66

Quote:

Originally posted by dúnadan
those of you for whom it is working, which app are you using to move the files? which set of files are you using (TG or NZ)? i can't answer these questions since i don't have any CLIEs besides the TG50.

I used the NZ file set and copied them onto the MS in /PALM/Programs/PowerRun/Picsel using MSImport and the Windows File Explorer. After updating the shortcuts in PowerRun 1.2, I an icon to click on and everything worked fine.

PowerRun tells me that I have 4.3M of RAM free, so I've got plenty of room for it to copy the files into RAM to run. ragermac, do you have a couple of meg of RAM free? Looks like PicselViewer needs at least 1.9M of space to be copied into ...