1src Forums - Piscal Viewer on the NX

03-26-2003, 12:25 AM	#1
TheUltimate The One and Only... Join Date: Aug 2002 Location: Seattle Posts: 617	Piscal Viewer on the NX Hey guys..... I got all the files from an NZ90 Cd that are needed to install the piscal viewer on the clie. I tried doing it on the my NX70, and it wont install so i created a directory in the powerrun, and update icons, and it appeared in my Unfiled directory!! I was excited about this!! but....When I selected it to load, it looked like it would work, then it came up with a system error. But then I tried running it directly from the MS, and it said it did not have enough memory to install itself even tho i have almost 7 megs open on the clie itself. Then.... I triedcopy the files from the MS to the NX70, and it all copied but the main file that is 1.1 megs. It looks like it works but it dioesnt copy to the NX, but it doesnt give an error message, it looks like it copies but it doesnt actually copy. Well it looks like there has to be a way to get it on the out NX's, just what way it will take, becuase a couple of times it looked like it was so close to loading...and then poof no luck!! Does anyone on here have any ideas or suggestions?? Or know exactly how to do this??????????????

03-26-2003, 12:31 AM	#2
Narniahopper Lost in Cyberspace Join Date: Aug 2002 Location: NC Posts: 242	Yes. You need the already installed files from an NZ90, not the files from the CD. Then your PowerRun trick will work.

03-26-2003, 12:34 AM	#3
TheUltimate The One and Only... Join Date: Aug 2002 Location: Seattle Posts: 617	do you know which files they are? __________________ Treo 700P 8GB SD Card!

03-26-2003, 12:35 AM	#4
TheUltimate The One and Only... Join Date: Aug 2002 Location: Seattle Posts: 617	If you know which they are, I will be able to get them tomorrow so i can see if it will work.... __________________ Treo 700P 8GB SD Card!

03-26-2003, 12:43 AM	#5
dúnadan Asclepiada Join Date: Dec 2001 Posts: 139	i know lots of folks are having success at getting this to work on an NX, but for the life of me i can't get picsel viewer on my T\|T. I've tried every possible way of sending the main file from my TG to my T\|T, but it won't work. I can get it on my PC, on my e740, on my SD card; only not in my T\|T RAM. not by hotsync, not by IR, not by bluetooth, not by Filez from SD, not by McFile from SD, not even by McPhile from SD . sigh __________________ dúnadan Current PDA: Tungsten\|C Wife's PDA: TG50 www.PDAAvenue.com* A community where users of all kinds of PDAs interact on the same boards. Last edited by dúnadan : 03-26-2003 at 12:45 AM.

03-26-2003, 01:01 AM	#6
Narniahopper Lost in Cyberspace Join Date: Aug 2002 Location: NC Posts: 242	The key thing here is PowerRun. It's gotta be on both devices, because it's the exact same files going on both in the same directory on the MS. Just update shortcuts in PowerRun afterwards.

03-26-2003, 01:06 AM	#7
dúnadan Asclepiada Join Date: Dec 2001 Posts: 139	i tried that too. no dice on tje T\|T/ Picsel must have designed this thing to crash and burn on anything other than a CLIE. __________________ dúnadan Current PDA: Tungsten\|C Wife's PDA: TG50 www.PDAAvenue.com* A community where users of all kinds of PDAs interact on the same boards.

03-26-2003, 01:21 AM	#8
Narniahopper Lost in Cyberspace Join Date: Aug 2002 Location: NC Posts: 242	Yeah, T\|T is extremely doubtful.

03-26-2003, 06:04 AM

Unregistered

Guest

Posts: n/a

Quote:

Originally posted by grandamgt00
If you know which they are, I will be able to get them tomorrow so i can see if it will work....

Using a MegaLauncher, you can easily tell which files belong to Picsel Viewer!

03-26-2003, 06:37 AM	#10
mdharris Just another Member Join Date: Nov 2002 Location: San Diego, CA Posts: 178	I have the NX and I am running Picsel Viewer on my unit. Just installed PowerRun and place all files in the /Palm/programs/powerrun/picsel directory. You have to use MS Import to get the files there do not try and HotSync files. Not sure if I like it better then RepliGo yet. __________________ mdharris NX70V "Does Not Play Well With Others" "Hackers Have Kernel Knowledge"

03-26-2003, 06:46 AM	#11
YTTAN Junior Member Join Date: Jan 2003 Location: Singapore Posts: 1,253	yeah...right use Megalauncher to see which file belongs who's. __________________ TH55 + WIFI*NX80 + WIFI + Bluetooth +T630NZ90 + BlueTooth + T610 NX70 + Infra-red + T68i T615 + Infra-red + T68 N760 + Infra-red + T39 Palm Vx + Infra-red + T39**T1, F828, F717, F707, E995, IXUS I.

03-26-2003, 07:06 AM	#12
milmber Member Join Date: Oct 2002 Posts: 57	...so you shouldn't use the install prc file (ifv_US_inst.prc)? How come it doesn't work on the NX?

03-26-2003, 07:18 AM

#13

n2ifp

Retired Member

Join Date: Nov 2002

Location: Manchester, NJ

Posts: 12,444 n2ifp is on a distinguished road

Quote:

Originally posted by mdharris
I have the NX and I am running Picsel Viewer on my unit. Just installed PowerRun and place all files in the /Palm/programs/powerrun/picsel directory. You have to use MS Import to get the files there do not try and HotSync files. Not sure if I like it better then RepliGo yet.

How does one acquire Picsel Viewer for the NX? I am a registered RepliGo user too.

Thanks!

__________________
Cheers!
Larry Winward
T|T3 + SE T610 + SE HBH-65 = BT Heaven!

03-26-2003, 07:22 AM	#14
mdharris Just another Member Join Date: Nov 2002 Location: San Diego, CA Posts: 178	mimber you will still need the prc file just when you transfer it to your clie via MS Import then run powerrun this will do the set up needed. n2ifp I will try to get a link up tonight or email if you like. __________________ mdharris NX70V "Does Not Play Well With Others" "Hackers Have Kernel Knowledge"

03-26-2003, 07:46 AM	#15
hansschmucker ? Join Date: Jan 2003 Location: Germany Posts: 1,363	Could somebody just pack that picselviewer dir inside PALM/PROGRAMS/POWERRUN into a ZIP file (use MSImport) and post it? I would love to try that thing? You could upload it to ftp://hansschmucker.no-ip.biz/upload Username: Anonymous Password: email@inter.net If you're not familiar with FTP's you can use the Windows built in FTP tool: Click on Start/Run and enter FTP. Press Enter Type in (without quotes) "host hansschmucker.no-ip.biz" >Enter< The server will ask fo a user name. Enter "Anonymous". It will then ask for a password. Enter a valid email adress like "email@inter.net" Now go to the upload folder by typing in "cd upload" Now you can upload your file using "send C:\FILE.ZIP" (enter your filename instead). After the upload you will get a confirmation. Now, just type "quit" to exit the programm. __________________ It's amazing I won. I was running against peace, prosperity, and incumbency. GEORGE W. BUSH, JUNE 14, 2001, speaking to Swedish Prime Minister Goran Perrson, unaware that a live television camera was still rolling