I almost had a heart attack 2 hours ago when I accidentaly left my ux50 on 5mm height of water for a few seconds. when I removed it from the pond I quickly dried it with a towel then with a a hair drier.
When it look dried I turned it on to test and for a moment I thought everything was ok then when I tried to take a quick photo the camera went mad and didn't stop taking photos. I had to soft reset but then ux50 wouldn't reboot. It freezed at the boot screen. I followed another thread and disconnected the battery by carefully removing the back cover.
Hopefully everything seemed ok after this. I assured that everything was dry inside and close the ux50 again, sync and everything was on place just like before the accident.
BUT.... now I noticed that not everything was ok... I couldn't scroll up and down using the scroller although I can press the button and it respond...
This might be a difficult question to answer but, does this sound like a irreversible problem? might it be just a loose connection of the scrller that I caused while dissambeling the clié?
__________________
iPaq H3850 >> Tungsten T >> SonyEricsson P800 >> Sony Clié UX50 >>{Playstation Portable >> Ericsson MC218 : as ebook readers }>>Palm T|X
SOLVED!
I was going to bed when I decided to make a backup shutdown procedure. after the reset the up and down scroller functioned again! this two event might notbe related but the problem is solved...
If I belived in deities I would be thanking them but since I don't belive in them I thank the 1src comunity for the help you've given me even unconsciously :P
By the way I still wanted to know more about the dissassembling of the ux50. does anybody know about it?
__________________
iPaq H3850 >> Tungsten T >> SonyEricsson P800 >> Sony Clié UX50 >>{Playstation Portable >> Ericsson MC218 : as ebook readers }>>Palm T|X
Linear Mode
