CadensDad

Anyone use this? Is it easy to use? Is it worth getting? I have tried to get movies onto my Ux with no luck. Way too many programs needed and too may conversions for me. I don't have the time for all that. I am looking for something easy.

__________________
>>>------------->
The Answer Is Out There Somewhere.

ktop33

As mentioned in other posts, and my personal experience, is that Pocket DVD can not create audio track that can be played on UX. It also seems to have problems with some resolutions.

The only solution I found, was freeware. DVDX to rip to MPG, then IC Prefs editor + Sony Image Converter to make the MQV file. And it takes some adjustmets to settings. And it takes a long time to convert and download (almost the duration of the movie!)

peterb123

Help will be on its way this December at UMite.com

Don't bother going there now, you'll find nothing.

__________________
Pass me those yams!

amoon

mmmm ok peterb you have got me, what sort of help?

dag3

Actually I use pocket dvd and it works great (I have not use it that much just encoded 2 or three movies so far but the quality has been excellent.) The one thing that I found was that you had to go with the higher settings. I pumped up the resolution and raised the quality. An dvd would compress to about 500 megs which is rather large for a palm device, but when I tried the lower setting and shrunk the dvd to about 250 megs the audio was really bad and the video was not to hot either.

The program itself could not be any easier to use. One step process.

spmilden

For those of you who have had sucess with converting DVDs, it would be appreciated if you would post what settings you have used with Pocket DVD Studio that offer the best quality on a TH55 assuming that (file) size doesn't matter.

amoon

These are the settings on tested for the Last Samuri (is the spelling right??)

"11 Pocket DVD Settings 11
352 x 192 (68k Pixel) Video.
24KBits sound Sample at 22 Khz.
Frame rate 15 fps.
Movie quality set at 215kbps.
Best suits x1 screen resolution on UX

320 x 176 (56k Pixel) Video.
24KBits sound Sample at 22 Khz.
Frame rate 15 fps.
Movie quality set at 318kbps.
Best suits all screen settings ****

384 x 184 (71k Pixel) Video.
24KBits sound Sample at 22 Khz.
Frame rate 15 fps.
Movie quality set at 181kbps.
Best suits x1 screen resolution on UX

384 x 118 (17k Pixel) Video.
24KBits sound Sample at 22 Khz.
Frame rate 12 fps.
Movie quality set at261kbps.
Best suits x1 screen resolution on UX"

spmilden

amoon - thanks for the info. I'll play around with them and see what I come up with.

dalzar

After converting from Pocket DVD to .avi what player are you using for the TH55? Are you converting with image converter? I keep getting an error message "file format not supported"

inomad

i use pocket dvd studio on a t3 and its awsome. If you can get mmplayer to work correctly on a UX, i can imagine that pocket dvd studio will serve you well

spmilden

dalzar - I use the Sony Movie Player program and find that it works great on the TH55. MMplayer seems to need a faster processor.
If you are getting an error message from IC then I suspect you may need to use a different codec in Pocket DVD. Try DivX MPEG 4 or Xvid MPEG 4. AND the problem with Pocket DVD is that it encodes the audio as MP3 which Movie Player won't use. You'll get video and no sound track without running the file through VirtualDub. OR you could just use DVDx (free) and do it in one step. Search the forums and you will find the settings to use.

Once you've got the output from DVDx you can rename the file to MOV?????.MPG (all uppercase and replace the ? with numbers), move it to your MS and play it. By the way the file needs to go in the DCIM/101MSDCF folder on the memory stick. If you don't have the folder then create it off of the root directory. Unfortunately you won't have the actual name of the video, just what ever name you gave it. AND you can run the file through IC, it just takes longer than dumping it directly to the MS.