| NEWS | | |  | | FORUMS | | |  | | FREEWARE | | |  | | ABOUT US | | |  | |
10-21-2003, 02:41 PM
|
#1 | | Junior Member
Join Date: May 2003
Posts: 17
| What is wrong with Brayder I just went and bought Jackflash. I had downloaded the 3.01 lite version and while it took more room than it generated it was a fair proof of concept.
So when I sent them money they sent me the old version which does not work on the NX60. I would like to note they don't tell you which version is coming. So I went back to the website and tried to get the 3.0 beta. No luck, sent email no response. They were quick to take my money for an outdated/useless product even though they are shilling with V3 as the freebee
OS 5 has been out for months so it's not like they should be surprised that someone is ordering who has it.
Should I work with them or just write it off and return the product and complain to Visa?
Regards,
Jim |
| |
10-21-2003, 02:50 PM
|
#2 | | Moderator Bronze Contributor
Join Date: Oct 2002 Location: Michigan, USA
Posts: 3,116
| How long did you wait after going to the website? After I did the beta request, it only took an hour, but I have heard that sometimes it can take a bit longer. I would wait a day or two, and if you still don't recieve any word back from Brayder, I would send them another e-mail.
They are usually a very good company to work with.
__________________
-Cameron
|
| |
10-21-2003, 03:03 PM
|
#3 | | Registered User
Join Date: Feb 2002 Location: On the beach
Posts: 322
| I agree with cbulock. I just purchases JackFlash this weekend for my NX80V. Because I am an avid ClieSource reader, I knew that that OS5 version was still in beta, but was available thru the site, so I went ahead and bought what was offered, knowing that it is not OS5 compatible.
Then, after some searching, I found the upgrade request page on their site and had the OS5 version in <24 hrs. Remember, this was over the weekend. At about the same time, I ordered a version of ZLauncher (known for their phenomenal C/S), and I received my activation code from ZZTechs at about the same time I received my upgrade from Brayder.
I expected some delay, but was quite satisfied with the speed each of these developers met my requests.
Hang in there.... if the upgrade link does not appear in your mailbox within 24hrs, send another request.
Believe me, it is agreat product and you will find it is well worth the time and money!
__________________ Proud member of the 49% |
| |
10-21-2003, 03:09 PM
|
#4 | | Hmmm...Zenta
Join Date: Mar 2002 Location: There I be!
Posts: 5,546
| Don't know the time frame here as it is not stated, but 1-2 days is pretty standard. |
| |
10-28-2003, 10:15 AM
|
#5 | | Junior Member
Join Date: Oct 2003
Posts: 2
| I ordered the 2.6 version from PalmGear. The email from PalmGear arrived at 9:53am. I requested the upgrade to 3.0x via their website. I suggest you wait at least an hour before making that request. The email from Brayder with the link for 3.0x arrived at 10:40am. I downloaded it and made a request for an activation code. The activation code arrived at 11:14am.
I would say that the response time is quite reasonable. |
| |
10-28-2003, 12:05 PM
|
#6 | | This floor is too slow!
Join Date: Apr 2003 Location: MD
Posts: 134
| For some twisted reason I could never (automatically or through the web) get my code (or whatever it was I needed) from Brayder. I e-mailed them and they sent me what I needed. They were unfailingly polite and prompt. Maybe whatever went wrong with me is happening to you, too. They're an excellent company. I'm sure they'll try to take good care of you.
__________________
Step-Step-Hold-Step, Step-Step-Hold-Step, Step-Step-Step-Hold (come-around), Step-Step-Boing-Step (throwout), Step-Step-Step-Hold (gather), Step-Step-Hold-Step (back to your regularly scheduled Balboa...)
|
| |
10-28-2003, 12:34 PM
|
#7 | | Registered User
Join Date: Jul 2003 Location: San Francisco, Ca.
Posts: 49
| Hi,
When I bought JackFlash I also got the non usable one for the T415. After writing them they told me to go to another site for the upgrade. BTW, I've found JackFlash to be great with my NX-80. I presently have 14 megs. free in RAM and I still have about 7 Megs. left in Flash
I hope this helps
__________________
Vx, N610, T615, NX-80
Last edited by phoenix_06 : 10-29-2003 at 03:24 PM.
|
| |
10-28-2003, 12:44 PM
|
#8 | | Junior Member
Join Date: Oct 2003
Posts: 2
| I failed to mention that I installed it without incident on my NX73. You DO need to delete JackFlashLight even though the README says you don't.
It found 15 whopping MB of flash memory which greatly has freed up my RAM. I now can remove those large apps from the MS and put them in flash leaving the MS for books, pics, and MP3s.
Great program. Highly recommended. If Sony were smart, they would license it and bundle it! |
| |
10-29-2003, 01:14 PM
|
#9 | | Registered User
Join Date: Jul 2002 Location: Hanford, California, USA
Posts: 446
| Quote: Originally posted by phoenix_06 Hi,
When I bought JackFlash I also got the non usable one for the T415. After writing them they told me to go to another site for the upgrade. This is it. http://www.brayder.com/update/JF30/index.html. BTW, I've found JackFlash to be great with my NX-80. I presently have 14 megs. free in RAM and I still have about 7 Megs. left in Flash
I hope this helps |
Only problem is you would need the username and pasword to acsess it. In other words only if you registered. Please, Please dont give it out though just delete the link!! |
| |
10-29-2003, 05:10 PM
|
#10 | | Registered User
Join Date: Nov 2002 Location: Aubrey, TX
Posts: 234
| I just got Jack Flash for my NX70. Very good support from Brayder, Very good prgram, very good experience. |
| |
10-29-2003, 05:19 PM
|
#11 | | I'll be your huckleberry. Bronze Contributor
Join Date: Feb 2002 Location: From the "city of brotherly love" to the Magic City!
Posts: 1,435
| Brayder= Excellent support for me Quote: Originally posted by ddsmith I just got Jack Flash for my NX70. Very good support from Brayder, Very good prgram, very good experience. |
I'd give it a few days and then email again also.
Mistakes can happenn, but these guys are reputable and the product is great!
__________________
-Stronggeek If you ain't livin on the edge... . . . well then you're takin up too much space.
Kickin with a Sony NX80 + HP 4705 + DSC-V1 + Qosmio G25 + 4g Microdrive + 512 Sony MS Pro + 1G Viking CF + Moto V710+ 128 Transflash +1g SD!
|
| |
10-31-2003, 03:17 AM
|
#12 | | Guest | Quote: Originally posted by ddsmith I just got Jack Flash for my NX70. Very good support from Brayder, Very good prgram, very good experience. |
Ditto. Took less than an hour from order to installation of beta and liberation of 4MB on my NX70V. Excellent service. | |
| |
10-31-2003, 08:25 AM
|
#13 | | Died that death may die!!
Join Date: Sep 2003 Location: Houghton, MI
Posts: 227
| How much free space do you get with jackflash on the nx80?
also is Jacksprat available for the nx80?
__________________
"My Lord God, I have no idea where I am going.
I do not see the road ahead of me.
I cannot know for certain where it will end.
Nor do I really know myself,
and the fact that I think I am following Your will
does not mean that I am actually doing so.
But I believe that the desire to please you does in fact please You"
Thomas Merton
|
| |
10-31-2003, 09:03 AM
|
#14 | | X-TH55 Nutcase member <>< Silver Contributor
Join Date: Dec 2002
Posts: 4,484
| Around 15 Meg
Coming soon!!!
__________________ . . . for unless you believe that I AM he you will die in your sins. - John 8:24 <><
PDA "trail" > Sharp Wizard OZ-750 > Palm M100 > Visor Deluxe > Visor Prism > Sony T665C > Sony NX80V > Sony TH55(2) > Palm Treo 700p
|
| |
11-28-2003, 06:06 PM
|
#15 | | Guest | I bought Jack Flash and downloaded the out of date version, requested an update, got the email and downloaded the update. Then downloaded the update, requested an activation code and received it.
All this within 30 minutes!
However, tales of 30 meg memory on a NX70 are a bit mis leading!
I've managed to free up 1.6 m/bytes of ram with 1116k of rom still left!
I make that some 16 megs of total RAM/ROM in my machine?
Still, I've got 'Flash Enable' on my memory card so in theory I can free up more RAM by deleting Jack Flash. | |
| | | Thread Tools | Search this Thread | | | | | Display Modes | Linear Mode |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is Off | | | All times are GMT -5. The time now is 01:06 AM. | |