totololo

Ah, OK i didn't see the pictures.

I am quite scared, because it seems there is no isolation to protect your battery's contacts ???
I took great care to wrap all sides of the battery in isolating adhesive, especially the connectors soldered to the wire.
Maybe, in your case, there is a short-circuit risk, even more if you put back the screw in place !

PLEASE PUT ISOLATING TAPE EVERYWHERE !!!

Excuse me, but it seems dangerous to me like this !

And so, maybe you have a power leak that explain your failed test ?

Otherwise, maybe you find it hard to close the unit because of the red wire passing above the battery ? I managed to have it on the side to avoid to squeeze it to close ...

Last thing, it's a clean work anyway, so congratulations !

Carlos32cc

more photos.

My old Blog http://clieux50.blogspirit.com/

Yes totololo, there am isolated the battery and the cable no longer happens over the battery, the results of the test are identical before and after adapting the battery.

I am not contented with the results, I will work days with the battery since the test does not satisfy me. I obtained better results with a battery of 900mah

totololo you could publish the test of your battery to compare the data?


My test battery
____________________________

PEG-UX50
S/N: H0M50GKV832Q
--
FAILED
--
Brightness: 50%
--
114 minute(s)

Minute Voltage Percent
0 4.20 100%
1 4.20 100%
2 4.20 100%
3 4.20 100%
4 4.20 100%
5 4.20 100%
6 4.20 100%
7 4.20 100%
8 4.20 100%
9 4.20 100%
10 4.20 100%
11 4.20 100%
12 4.20 100%
13 4.20 100%
14 4.20 100%
15 4.20 100%
16 4.20 100%
17 4.20 100%
18 4.20 100%
19 4.20 100%
20 4.20 100%
21 4.20 100%
22 4.20 100%
23 4.20 100%
24 4.20 100%
25 4.20 100%
26 4.20 100%
27 4.20 100%
28 4.20 100%
29 4.20 100%
30 4.20 100%
31 4.20 100%
32 4.20 100%
33 4.20 100%
34 4.20 100%
35 4.20 100%
36 4.20 100%
37 4.20 100%
38 4.20 100%
39 4.20 100%
40 4.20 100%
41 4.20 100%
42 4.20 100%
43 4.20 100%
44 4.20 100%
45 4.20 100%
46 4.20 100%
47 4.20 100%
48 4.20 100%
49 4.20 100%
50 4.20 100%
51 4.20 100%
52 4.20 100%
53 4.17 95%
54 4.17 95%
55 4.17 95%
56 4.16 93%
57 4.17 94%
58 4.16 93%
59 4.16 93%
60 4.16 92%
61 4.16 93%
62 4.14 89%
63 4.13 87%
64 4.13 87%
65 4.13 87%
66 4.13 87%
67 4.13 87%
68 4.13 87%
69 4.13 87%
70 4.13 86%
71 4.10 81%
72 4.10 80%
73 4.10 80%
74 4.10 80%
75 4.10 80%
76 4.10 80%
77 4.10 80%
78 4.10 80%
79 4.10 80%
80 4.09 79%
81 4.09 79%
82 4.09 79%
83 4.08 77%
84 4.08 77%
85 4.08 77%
86 4.08 77%
87 4.08 77%
88 4.08 77%
89 4.08 76%
90 4.05 70%
91 4.05 70%
92 4.05 70%
93 4.05 70%
94 4.04 69%
95 4.05 70%
96 4.04 68%
97 4.01 63%
98 4.01 63%
99 4.01 63%
100 4.01 63%
101 4.01 63%
102 4.01 63%
103 4.00 61%
104 4.01 62%
105 3.98 57%
106 3.99 58%
107 3.98 57%
108 3.98 57%
109 3.98 57%
110 3.98 57%
111 3.98 57%
112 3.97 55%
113 3.96 53%

6BA9

totololo

Voici le test en détail :

--
PASSED
--
Brightness: 50%
--
148 minute(s)

Minute Voltage Percent
0 4.20 100%
1 4.20 100%
2 4.20 100%
3 4.20 100%
4 4.20 100%
5 4.20 100%
6 4.20 100%
7 4.20 100%
8 4.20 100%
9 4.20 100%
10 4.20 100%
11 4.20 100%
12 4.20 100%
13 4.20 100%
14 4.20 100%
15 4.20 100%
16 4.20 100%
17 4.20 100%
18 4.20 100%
19 4.20 100%
20 4.20 100%
21 4.20 100%
22 4.20 100%
23 4.20 100%
24 4.20 100%
25 4.20 100%
26 4.20 100%
27 4.20 100%
28 4.20 100%
29 4.20 100%
30 4.20 100%
31 4.20 100%
32 4.20 100%
33 4.20 100%
34 4.20 100%
35 4.20 100%
36 4.20 100%
37 4.20 100%
38 4.20 100%
39 4.20 100%
40 4.20 100%
41 4.20 100%
42 4.20 100%
43 4.20 100%
44 4.20 100%
45 4.20 100%
46 4.20 100%
47 4.20 100%
48 4.20 100%
49 4.20 100%
50 4.20 100%
51 4.20 100%
52 4.20 100%
53 4.20 100%
54 4.20 100%
55 4.20 100%
56 4.20 100%
57 4.20 100%
58 4.20 100%
59 4.20 100%
60 4.20 100%
61 4.20 100%
62 4.20 100%
63 4.20 100%
64 4.20 100%
65 4.20 100%
66 4.20 100%
67 4.20 100%
68 4.20 100%
69 4.20 100%
70 4.20 100%
71 4.20 100%
72 4.20 100%
73 4.20 100%
74 4.20 100%
75 4.20 100%
76 4.20 100%
77 4.20 100%
78 4.20 100%
79 4.20 100%
80 4.20 100%
81 4.20 100%
82 4.20 100%
83 4.20 100%
84 4.20 100%
85 4.20 100%
86 4.20 100%
87 4.19 98%
88 4.17 95%
89 4.17 95%
90 4.17 95%
91 4.17 94%
92 4.17 95%
93 4.17 95%
94 4.16 93%
95 4.16 93%
96 4.16 93%
97 4.16 93%
98 4.16 93%
99 4.16 92%
100 4.16 93%
101 4.15 90%
102 4.14 88%
103 4.13 87%
104 4.13 87%
105 4.13 87%
106 4.13 87%
107 4.13 87%
108 4.13 87%
109 4.13 86%
110 4.13 87%
111 4.13 86%
112 4.12 84%
113 4.11 82%
114 4.10 80%
115 4.10 80%
116 4.10 80%
117 4.10 80%
118 4.10 80%
119 4.10 80%
120 4.10 80%
121 4.10 80%
122 4.10 80%
123 4.10 80%
124 4.10 80%
125 4.10 80%
126 4.10 80%
127 4.09 79%
128 4.09 79%
129 4.10 80%
130 4.09 78%
131 4.09 79%
132 4.09 78%
133 4.08 77%
134 4.09 78%
135 4.08 77%
136 4.08 77%
137 4.08 77%
138 4.08 77%
139 4.08 77%
140 4.08 77%
141 4.08 77%
142 4.08 77%
143 4.08 77%
144 4.08 77%
145 4.08 77%
146 4.08 77%
147 4.08 77%

0F44

totololo

Are you sure your BT and Wifi were OFF ?
On the other hand, i've read that LI-ION batteries need some cycles to give their full power ?
Mine wasn't new it had maybe 15 or 20 cycles befor i did this mod.
Or maybe this battery is not as good as it's supposed to be ?

Carlos32cc

I will return to do the test last days.
The today activity:
-2 hours of music (off screen).
-20 minutes of text reading autoscroll with palmfiction
-20 minutes of video reproduction.
-15 minutes of use with tomtom and bluetooh
-20 photos
- Consultations to agenda, appointments, tasks, etc.

--> Battery at the end of day 54%

better than yesterday

caseyatbt

I must be missing something. I have used both Battery test utilities.
How do you get the print out of your test??????
I can usually figure these kind of things out. I will feel stupid if I missed something real obvious.

jc

__________________
Currently own: PEG-UX50 For sale, PEG-UX40 For sale, PEG-TH55/E1For sale, Tapwave Zodiac 2 For sale(I have 2), Sprint HTC Touch Pro For sale, Palm Treo Pro

totololo

Hihihi !
It puts a .txt file in your memorystick.

m0nkeyb0y

The text file will be in the root of your memory stick called something like BatTest_PEG-UX50_0110_1535.txt (the number appear to be pretty random). Each time you run BatteryTest a new text file will be created with a new name. Hope this helps.

PS - Carlos, I had a look at your blog - Excellent work on the screen magnifier!

__________________
Palm M100 -> Palm Vx -> Clie SL10 -> iPaq 3630 -> iPaq 3830 ->
Clie UX50 + 2GB MS Pro Duo + JCB40-1800 -> Aibo ERS-7M3! + PSP + iPhone 4GS

Need some high quality, professional writing for your site? Professional copywriting services from Tech Write

Into digital scrapbooking? Digital Monsoon has got you covered!

totololo

Hey Carlos !
I just took a look at your blog ... And found it funny to notice that you have an Asus Pundit R ... at home, we had one, as a media center, before switching to Mac ...

Quite nice barebone, isnt'it ?