1src Forums - Dynamic clocking for [almost] all devices!

07-31-2006, 03:01 AM	#1
dmitrygr Software engineer/hacker Join Date: Jan 2004 Location: Silicon Valley, CA Posts: 5,061	Dynamic clocking for [almost] all devices! here: LINK read the readme, tell me how it goes T3 version has been fixed to not overclock so high so it should run fine on all devices now. All devices are overclocked a bit at maximum setting and underclocked significantly at minimum. Run the DynaClock.XX app once (from card is ok) - it will activate. It will also automatically activate after a reset if it is in ram. and yes, HHE is supported and it DOES increase battery life! the next person to ask a question that is answered in the readme.txt will be hurt by me personally EDIT: Updated the DynaClock CORE archive which is HERE. Now supported are almost all current and past OS5 devices. DynaClock UI can be found HERE. It is used to configure the application. The sources for this UI are available HERE. MORE INFO __________________ Annoying me is NOT an approved way of encouraging me to produce software My software:PowerSDHC, PowerDrive, nuRom, UDMH, warpSpeed, PowerDiGi, brightnessFix, etc... Get it all here:http://www.PalmPowerups.com Last edited by dmitrygr : 09-16-2006 at 06:44 PM. Reason: cause i wanted too, that's why!

07-31-2006, 03:07 AM	#2
ahsirg ahsirg.kvplab.com Join Date: May 2005 Location: Minsk, Belarus Posts: 291	Works splendid on z72 and z71. but on my 72 I have to use .z2 cause .tx makes my screen go haywire

07-31-2006, 03:40 AM	#3
Bexuanmai Tungsten T3 Join Date: Aug 2005 Posts: 129	I installed DynaClock.T3 on my T\|T3 , it only shows the clock ? I can't figure out how to use it

07-31-2006, 03:57 AM	#4
c-j-archer H0rst Join Date: Jul 2005 Location: Dortmund/Germany Posts: 69	Does it run on TT5 with the TX file? Sorry, didn't read the readme

07-31-2006, 05:53 AM	#5
iemand Registered User Join Date: Aug 2004 Posts: 155	Cool, I asked for that on the other forum, surely gonna give it a try! Euhrm, on a side-note, could you please give some information on the status of the ROM-editing app for the LD...? I have given my recently bought LD a nice long 'experimental time', to test things out and to get it to behave steady, which it does now. So I am planning on cleaning up the ROM the app is released, and not to experiment (as much) after that, that is to really start using it as my daily PDA. So any information would be welcome... Thanx!

07-31-2006, 07:47 AM	#6
alex_herrero Registered User Join Date: Jun 2005 Posts: 38	I'll try it in my TX ASAP... __________________ -----BEGIN PALM CODE BLOCK-----[Version: 1.1] PG f+ h+ b+ p+ o+ m++ F- v+ g+ k+ r++ c++ n++ t+ a++ G E+ M+ DP{TX} ------END PALM CODE BLOCK------ [PDA]TX(Palm)+SD512Mb(Kingston)// [Mobile]T637(SE)+BTHBH-600(SE)// [Work]PIV3.40MhzHT+1GbRAM+80GbHD+W2kSP4

07-31-2006, 07:48 AM	#7
drwho Registered User Join Date: Jun 2005 Posts: 257	It makes my TX very slow, the screen very flickery, and it now emits a high-pitched whistle. I did install the TX specific version.

07-31-2006, 08:17 AM

jconaway99

Proud Father Member

Join Date: Dec 2002

Location: Western PA

Posts: 241 jconaway99 is on a distinguished road

Quote:

Originally Posted by drwho

It makes my TX very slow, the screen very flickery, and it now emits a high-pitched whistle. I did install the TX specific version.

Does the same thing on my LD.

__________________
'...whatever is true, whatever is noble, whatever is right, whatever
is pure, whatever is lovely, whatever is admirable--if anything is
excellent or praiseworthy--think about such things.' Philippians 4:8

07-31-2006, 08:26 AM	#9
DCBAKER Registered User Join Date: Sep 2003 Posts: 259	I installed on a T3. It works great except it messes with Hotsync. If it's enabled during Hotsync it, the Hotsync always cuts out before it's done. Anyone else experiencing this? Any solution?

07-31-2006, 08:34 AM

#10

alex_herrero

Registered User

Join Date: Jun 2005

Posts: 38

Quote:

Originally Posted by drwho

It makes my TX very slow, the screen very flickery, and it now emits a high-pitched whistle. I did install the TX specific version.

Same device, same version, same results for me...

__________________

-----BEGIN PALM CODE BLOCK-----[Version: 1.1]
PG f+ h+ b+ p+ o+ m++ F- v+ g+ k+ r++ c++ n++ t+ a++ G E+ M+ DP{TX}
------END PALM CODE BLOCK------
[PDA]TX(Palm)+SD512Mb(Kingston)// [Mobile]T637(SE)+BTHBH-600(SE)// [Work]PIV3.40MhzHT+1GbRAM+80GbHD+W2kSP4

07-31-2006, 08:36 AM

#11

drwho

Registered User

Join Date: Jun 2005

Posts: 257 drwho is on a distinguished road

Quote:

Originally Posted by DCBAKER

I installed on a T3. It works great except it messes with Hotsync. If it's enabled during Hotsync it, the Hotsync always cuts out before it's done. Anyone else experiencing this? Any solution?

Snap! Same here

07-31-2006, 09:19 AM	#12
vineds Registered User Join Date: Apr 2003 Posts: 9	Z2 no go I installed the QU one ( the version listed for my Zodiac 2) and it loads but thes if I click on it it states that the information is not availabe and to wait a few seconds. The screen then freezes and the is in a constant reset loop that I have to disable all hacks and uninstall the app to get out of. Is this supposed to work with my Z2 or is that just a guess? Last edited by vineds : 07-31-2006 at 09:22 AM.

07-31-2006, 10:04 AM	#13
Biffa001 Registered User Join Date: Apr 2005 Posts: 1	Installed on my T3, runs ok so far, but it doesn't eliminate the screen whine....is it possible to set it to run at a slightely different frequency (like I did with PXA clocker) to stop the whine? Cheers Steve

07-31-2006, 11:17 AM

#14

c-j-archer

H0rst

Join Date: Jul 2005

Location: Dortmund/Germany

Posts: 69

Quote:

Originally Posted by drwho

It makes my TX very slow, the screen very flickery, and it now emits a high-pitched whistle. I did install the TX specific version.

Same behavior on my T5.

07-31-2006, 11:33 AM	#15
PinCushionQueen Oxidants happen. Join Date: Nov 2005 Location: Seattle Posts: 1,437	Does this app do the same kind of tweak as WarpSpeed? If I have WarpSpeed do I still need this app? P.S. I read the READ ME before asking the questions ;-) __________________ Palm TX + 2 Gb UltraII SD When you wish upon a falling star, your dreams can come true. Unless it's really a meteorite hurtling to the earth which will destroy all life.