| NEWS | | |  | | FORUMS | | | | | | FREEWARE | | | | | | ABOUT US | | | | | | 
11-11-2006, 11:14 PM
|
#271 | | Registered User
Join Date: Sep 2002
Posts: 42
 | Hi Graham,
The resets only happen after a hotsync when removed from the cradle.
If just charging without hotsyncing everything is ok.
I am using the latest version 1.2.1 but I think this has been a problem on previous versions too.
Dennis | 
|  | |
11-12-2006, 10:44 PM
|
#272 | | Registered User
Join Date: Mar 2006
Posts: 28
| Hey Dennis,
Thanks for the extra information! I'm afraid that I've been a little bit lazy and didn't fully test out the HotSync behaviour of this release. But I'll have to bite the bullet now and install it again and sort this issue out once and for all. Thanks for all the feedback, with a bit of luck I'll be able to nail it this time!
...graham. | |
| | |
11-13-2006, 10:49 AM
|
#273 | | Registered User
Join Date: Sep 2003
Posts: 259
| A little late on this, but I think my T3 has behaved basically the same as Dennis's. I haven't really kept too close a watch on the reset behavior as it hasn't been a big deal. However, my T3 does reset if I remove it from the cradle after Hotsync if I don't first navigate away from the Hotsync screen.
I've also noticed that ocassionally baT3 will lose control of the LED sometimes. I'm not sure what the exact circumstances are as it doesn't happen a lot, but I will keep an eye out for it. Usually what happens is that i'll notice that the chrge will drop below one of the levels ID'd in baT3, but the LED doesn't light up as it should. What I've had to do is go to baT3, deactivate it, select the delete option, delete it and then reinstall from a copy I keep on my SD card. That usually fixes it. It doesn't happen often and it really isn't a big deal. If I run into this problem again, I'll try to remember the exact circumstances that cause it. | |
| | |
11-15-2006, 02:55 AM
|
#274 | | Registered User
Join Date: Mar 2006
Posts: 28
| Hey DCBaker,
Thanks for confirming the funky HotSync reset behaviour and letting me know about the other occasional random reset. If you could keep an eye on that one and let me know if you see it again or manage to reproduce it that'd be great!
Thanks for all the feedback! You guys have really helped get the application into the shape it is now - thanks for taking the time to bug test it and put up with all the random resets - very much appreciated!
The good news is that I managed to track down the voodoo that was causing the HotSync problem and even noticed another potential reset waiting to happen. So I've patched both of these and everything seems to be running smoothly now.
Version 1.2.2 is available from the usual spot: http://www.maths.tcd.ie/~gfennell/Palm/baT3.prc
As always, let me know if you spot any glitches or if you encounter any (random) resets. Fingers crossed we've seen the last of the dreaded HotSync issue!
...graham. | |
| | |
11-16-2006, 12:17 PM
|
#275 | | Registered User
Join Date: Sep 2002
Posts: 42
| Thanks Graham,
No more HotSync resets on removal from cradle!
Dennis | |
| | |
11-17-2006, 10:16 AM
|
#276 | | Tungsten T3 - The One
Join Date: May 2005 Location: Lima, Perú
Posts: 744
| hmm, strange behaviour here - after hotsynch no crash anymore, but
1. hotsynch, automatic shut down (turn off) - when I press power button - get hard reset options
2. same story but will not turn on, when reseting t3bat is not working anymore
Ruben
Think ist the handling of alarms - if I remember right, it happened always after an alarm sounded
Last edited by tosbsas : 11-17-2006 at 05:05 PM.
| |
| | |
11-22-2006, 01:15 AM
|
#277 | | Registered User
Join Date: Mar 2006
Posts: 28
| Hey Ruben,
Sorry to hear that you're experiencing another reset loop and a particularly nasty one at that. I've tried to reproduce the above behaviour by setting various alarms with different application configurations but to no avail.
Has anyone else managed to reproduce the reset Ruben describes? Any extra info that you, or anyone else, can give me would really help with tracking down the bug. I'll keep looking but without a reproduction case it'll be tricky to nail.
...graham. | |
| | |
11-22-2006, 06:43 AM
|
#278 | | Tungsten T3 - The One
Join Date: May 2005 Location: Lima, Perú
Posts: 744
| I use a alternative sound file -emerald sounds - might that be a problem?
But relax I will keep on investiganting - already three days without crash
Ruben | |
| | |
07-06-2007, 01:10 AM
|
#279 | | Registered User
Join Date: Nov 2005 Location: Russia
Posts: 38
| Good day to all. I cannot download the baT3.prc file... Can somebody re-upload it? It's very interesting to test... Thanks in advance. | |
| | |
07-06-2007, 02:34 AM
|
#280 | | Software engineer/hacker
Join Date: Jan 2004 Location: Silicon Valley, CA
Posts: 5,061
| Mirror of version 1.2.2: [ LINK]
__________________ Annoying me is NOT an approved way of encouraging me to produce software My software:PowerSDHC, PowerDrive, nuRom, UDMH, warpSpeed, PowerDiGi, brightnessFix, etc... Get it all here:http://www.PalmPowerups.com | |
| | | Thread Tools | Search this Thread | | | | | Display Modes |  Linear Mode | 
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off | | | All times are GMT -5. The time now is 02:28 PM. | |
