davidmurrayesq

does anyone know if it's possible to make a cable/device with a dummy sony memory stick on one end and a mini usb to go into a portable hard drive on the other?

i have a usb to card reader so i must be half way there already.

what i'm trying to achive is to plug my portable hard drive into my sony device wich has a memory stick socket on it. i would like to be able to read and write to the hard drive which has a considerably larger capacity than just a memory stick alone.

bdhu2001

I have no clue. I've been trying to figure out the same thing. Let me know what you come up with.

dragonsgames

I doubt it.

__________________
Sony Clie N760c -> Sony Clie TG-50 -> Treo 600 -> Sony Clie NX80, Fossil wrist PDA-> Sony Clie UX50 -> Sony CLIE VZ90 -> TG50, iPod 5.5 Gen -> Sony CLIE UX50, Sony PEGA-EB40 -> Sony CLIE PEG-TH55/E1, Samsung A900 (Blade) -> HTC Touch -> Palm Pre -> HTC Hero, Apple MacBook -> HTC Evo ->Nexus S 4G, Apple MacBook Pro

I like iSpin, it's my favorite launcher!!
I am the 2nd top 1src poster!!

Pookkie

Here's a link to what I think you were wondering about. Notice he updates the thread saying " don't get this" but maybe some one else could make it last longer.

http://jamerican.net/forums/viewtopic.php?t=13

Company is Datel, I've seen it on Ebay for about $170.00

golalmo

pookkie, i dont think that what he ments. the datel drive is ms due -> cf adapter, that run an internal microdrive.
but theoretically it can be done.
what you need is ms->msdue adapter, msdue->cf adapter and ide cf card (connect ide drive to cf slot)
let us know how it works

__________________
palm 3 -> workpad c3 -> palm 3c -> workpad c505 -> peg-N710c(760c) -> nr70v -> ux50 -> iPaq rx4240 -> iPhone8G -> ???

davidmurrayesq

thats exactly what i want to do but where do you find a ide to cf adapter?

Pookkie

What I think you need to do is find out what the pin-out is on the Memory stick and compare it to the mini usb, usb only has 4 pins. Usb to mini usb still only 4 pins at either end, the 2 outer contacts are voltage and ground the center contacts are data. If the mem. stick pin-out seems to that simple it might work for you. The only concern I have is that I think you'll need some kind of interface ie. usb interface ,so when connected to the drive it will reconize it and communicate with it. At any rate it looks like you may have to do some experimenting on your own if possible. Here's a link for the pinout of memory stick.

http://pinouts.ru/data/memorysrick_pinout.shtml

eagleliu

I know one professional manufacturer in China.There are all kinds of adapters here . Pls logo on website: www.sintech.cn to find your interested.The quality is good and price is very cheap.

Attached Thumbnails