1src Forums - View Single Post - Tungsten C can't connect wifi, help me plz

You could try to knock onto the back. There seems to be a problem at the connection between mainboard and Wireless LAN chip.

I have written an article on TamsPalm-DE http://tamspalm.pytalhost.eu/2007/0...en-c-von-innen/ (sorry, no English text yet) with two photos of the mainboard / WLAN chip. You need a Torx T6 screw driver to open your Palm. Then take out the WLAN chip and insert it again. It *could* help (it helped someone on Nexave, but not too much me).

04-22-2007, 10:42 AM	#4
alegra TamsPalm Join Date: Aug 2005 Posts: 281	You could try to knock onto the back. There seems to be a problem at the connection between mainboard and Wireless LAN chip. I have written an article on TamsPalm-DE http://tamspalm.pytalhost.eu/2007/0...en-c-von-innen/ (sorry, no English text yet) with two photos of the mainboard / WLAN chip. You need a Torx T6 screw driver to open your Palm. Then take out the WLAN chip and insert it again. It could help (it helped someone on Nexave, but not too much me).