According to the additional doc's in the JackSprat Beta it says:

JackSprat 2.0b11 (September 27, 2002)
- Completed support for the Kyocera 6035
- Added support for the Treo 300
- Added support for the Treo 90
- Added support for the Clie SL-10, SJ-20 and SJ-30 (for devices with Flash)
- bugfix: international keyboard support on Treo devices now works
- Added ability to remove the Clie-RMC on the T650/T665/T675

JackSprat 2.0b11 (August 7, 2002)
- Added support for the Kyocera 6035

JackSprat 2.0b10 (August 7, 2002)
- Fixed no flash issue with T665C

JackSprat 2.0b9 (July 18, 2002)
- Added Support for Treo 180, 180g, 270

JackSprat 2.0b8 (July 12, 2002)
- fixed support for m500/m505 Palm OS 4.1

JackSprat 2.0b7 (July 8, 2002)
- add support for NR70, NR70V, T650, T665
- small fixes to backup format

Does this sound right?

is there a minimum amount of memory you should leave in flash or can i completely max it out?

Sounds official!! Sorry about that, I thought the T665 was newer than that.

C'mon, haven't you read all 14 pages here :) We were talking about this earlier. Someone said Brayder had told him a device can get unstable when you don't leave some free. But in my experience in the past, I've jammed it full and haven't had any problems. I've been running with 6K free on my NX for the past day and haven't had any issues.

****. my nx jap version hang with fatal error. read the manual for jackflash and try to reset but cannot.. now power also cannot shut down!!! help needed here!!! wat am i suppose to do?

Thanks rldunn. Nah, I'm too lazy to read 14 pages. I did read someone's post concerning the camera requiring free flash. But I too in the past have run my device with almost all of the flash maxed out. Guess we'll all find out.

Finally got my reg code but no info on where to download the beta?
anyone?
alan

I have not seen if anyone tried to move the following into the Flash.
I believe these are from the Patch upgrade form a few weeks ago.
Any input?

2452MSLib
3452Slot
CFLib
GameConLoader
GameContollerLib
GraphicsLibrary
JogAssistLoader
PenPatchNX70
Sat. Forms RDK 5.1

I hesitate to move these since they were apart of the patch but always wondered why
they never generated a update that automatically flashed to ROM to begin with.
I remember when I had my Palm Pilot [V, Vx, m5xx series] they had OS updates for
the 3.1 to 3.5, to 4.0, and 4.1 and all flashed into the ROM.
Any ideas why Sony does not???
Thanks

i had the same problem. you have to click on the request upgrade link as well as the reg code request form on the support page.

Ahhhh!
Thanks
alan

I would guess the reason is cost. I didn't even load this patch since my system was running fine without it, so I'm not sure about loading them in Flash. I personally wouldn't move them into Flash, since they probably weren't tested that way.

Maybe the first two files are part of patch upgrade, there are others that are not in your list. So many seemed to have a problem with it, for reasons unknown to me. Maybe it's a good thing that it wasn't placed in flash or otherwise Sony may have had a big mess on it's hands.

BTW, the patch installed fine for me in RAM.

2452MSLib
3452Slot
PenPatchNX70

I tried to move these and it says they are in use, I am not sure how to stop them to move them. At anyrate, JackFlash let's you know if you can or can't move it.

Check out my email above...

http://www.brayder.com/products/jacksprat_beta.html

That is for the Sprat version.

Not sure you guys know this yet but there is a 3.0b2 out now.

That is the old version, and is not for OS5...
They are still working on JackSprat from a email I just received.

Thanks, just put in my request. Don't know what was changed though.

This is what the documentation states:
JackFlash 3.0b2 (March 17, 2003)
- Minor fix