Only 511k on a Japanese NX70

I got my copy of the JackFlash beta today. Neeedless to say I was pretty disapointed when I found that I only had 511K available on my NX70. Sure hope that the compatable version of JackSprat is soon to come.

tim

I agree. I have a question then for you... I own a T665 and want to use both of these. Will it remove the programs that use 1 Meg of my RAM before I ever install anything (when my PDA is brand new)? Also, does the restore function bring it back to what it was before I ever did anything? Will Sony be able to tell that I did anything? I don't want to void my warranty.

One last thing... I use DateBK5. If I delete Address, Memo, and Address, will DateBK5 still work or does it need these applications to run? Thanks for anyone's help!

riversen, I believe that the current version of Jacksprat doesn't support the T665, so your questions are really a moot point at this time.

Are you talking about the 2.0 Beta version? I downloaded it and want to install it. Are you saying that it won't work?

http://www.brayder.com/products/jacksprat_beta.html

Here is the website for this "new" beta version. If it doesn't work, let me know, please.

If you click on your link, then click on the News link on the left, it lists the new devices added with each version, and I don't see the T665 (was it even out in September?), so I don't think it's supported. Some other T665 owners can verify this though.

According to the additional doc's in the JackSprat Beta it says:

JackSprat 2.0b11 (September 27, 2002)
- Completed support for the Kyocera 6035
- Added support for the Treo 300
- Added support for the Treo 90
- Added support for the Clie SL-10, SJ-20 and SJ-30 (for devices with Flash)
- bugfix: international keyboard support on Treo devices now works
- Added ability to remove the Clie-RMC on the T650/T665/T675

JackSprat 2.0b11 (August 7, 2002)
- Added support for the Kyocera 6035

JackSprat 2.0b10 (August 7, 2002)
- Fixed no flash issue with T665C

JackSprat 2.0b9 (July 18, 2002)
- Added Support for Treo 180, 180g, 270

JackSprat 2.0b8 (July 12, 2002)
- fixed support for m500/m505 Palm OS 4.1

JackSprat 2.0b7 (July 8, 2002)
- add support for NR70, NR70V, T650, T665
- small fixes to backup format

Does this sound right?

is there a minimum amount of memory you should leave in flash or can i completely max it out?

Sounds official!! Sorry about that, I thought the T665 was newer than that.

C'mon, haven't you read all 14 pages here :) We were talking about this earlier. Someone said Brayder had told him a device can get unstable when you don't leave some free. But in my experience in the past, I've jammed it full and haven't had any problems. I've been running with 6K free on my NX for the past day and haven't had any issues.

****. my nx jap version hang with fatal error. read the manual for jackflash and try to reset but cannot.. now power also cannot shut down!!! help needed here!!! wat am i suppose to do?

Thanks rldunn. Nah, I'm too lazy to read 14 pages. I did read someone's post concerning the camera requiring free flash. But I too in the past have run my device with almost all of the flash maxed out. Guess we'll all find out.

Finally got my reg code but no info on where to download the beta?
anyone?
alan

I have not seen if anyone tried to move the following into the Flash.
I believe these are from the Patch upgrade form a few weeks ago.
Any input?

2452MSLib
3452Slot
CFLib
GameConLoader
GameContollerLib
GraphicsLibrary
JogAssistLoader
PenPatchNX70
Sat. Forms RDK 5.1

I hesitate to move these since they were apart of the patch but always wondered why
they never generated a update that automatically flashed to ROM to begin with.
I remember when I had my Palm Pilot [V, Vx, m5xx series] they had OS updates for
the 3.1 to 3.5, to 4.0, and 4.1 and all flashed into the ROM.
Any ideas why Sony does not???
Thanks

i had the same problem. you have to click on the request upgrade link as well as the reg code request form on the support page.

Ahhhh!
Thanks
alan