1src Forums

1src Forums (http://www.1src.com/forums/index.php)
-   Applications (http://www.1src.com/forums/forumdisplay.php?f=25)
-   -   SDHC driver - where to next? (http://www.1src.com/forums/showthread.php?t=145786)

dmitrygr 06-17-2008 11:46 PM

SDHC driver - where to next?
 
Currently driver supports T5, TX, and LifeDrive in ReadWrite mode. Zire 72 is supported in ReadOnly mode. Now I want to know what to support next...

Please vote only if you plan to purchase the driver for, and own, the device you vote for.

EDIT: sorry, forgot the T|C, if you want it supported, vote for T|E2, since they are structurally similar

robitaille88 06-18-2008 12:09 AM

Any chance of adding SDIO as an option :P

Lol, I'm sure you've heard enough ppl buggin about that so I'll vote Zire 72 :-D

JRakes 06-18-2008 06:38 AM

Palmie, my T3, is all abuzz with the possibilities! Good luck getting the driver info / chip specs.

Thanks, dmitry! :D

Joe

TheDreammaster 06-18-2008 07:13 AM

I'm a T3 owner and, of course, I'd like to have support for this device... If this won't be possible, I'll try to get a LD, install PowerDrive and SDHC driver :)

Thx for all the work!.

ZodiacDuo 06-18-2008 07:14 AM

I'd love Left slot Zodiac support.

ricktt3 06-18-2008 08:58 AM

I have a T3 and I am looking forward to this support.

tl47 06-18-2008 09:49 AM

How about the Tungsten C?? I hope the T3 support would mean TC too!

Gwidion 06-18-2008 10:06 AM

Hi dimitry,
there is a new option for you: SDHC Driver for Treo 680. Because it doesn't recognize Cardsizes correct you can only use the first 10,7GB.

scottl 06-18-2008 10:35 AM

Being that the T3 is the best Palm has managed to pull off (IMO) I sure hope it makes it into the released product. My TX is working fine with 2GB, but 1GB in the T3 is a bit tight. I am thinking I would buy this driver for my T3 and (if I don't buy a treo) my TX.

I wouldn't be surprised if the T3 has better SD performance than the TX when comparing this driver on the two devices.


Dmitry, PLEASE continue your efforts (Read/Write mode, of course) on the T3.



holvoetn 06-18-2008 11:04 AM

Quote:
Originally Posted by Gwidion
Hi dimitry,
there is a new option for you: SDHC Driver for Treo 680. Because it doesn't recognize Cardsizes correct you can only use the first 10,7GB.
It should be able to use the fulll size.
I know there is an issue with the device reporting sizes and so, but the full card should be usable.

Isn't that the case ?
I am thinking about getting my first SDHC card (16Gb most likely) so I would be interested to know about being able to USE the full storage.

sculptedstylus 06-18-2008 01:18 PM

I vote for the Zodiac!

T|dEude2 06-18-2008 01:20 PM

T|E2 before T|E, e2 is limited to 1GB and e to 2gb. E2 shoeld therefor have higher priority.

gr

icefireicefire 06-18-2008 01:32 PM

I vote for Zodiac too -- at least make the donated zodiac do some good ;)

dmitrygr 06-18-2008 01:44 PM

i will eventually support all, just want to prioritize

Gwidion 06-18-2008 03:27 PM

Quote:
Originally Posted by dmitrygr
i will eventually support all, just want to prioritize

Also T680? That would be wonderful (because Palm always make "half-things" like we in german say.


All times are GMT -5. The time now is 11:32 PM.

Powered by: vBulletin Version 3.0.3
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.