PDA

View Full Version : Looking for camera for UX50


NewUsers
09-21-2005, 04:56 AM
HI all

I just bought UX 50 from ebay. And I am satisfy with camera. Picture is not scharp and so many balck spots and a color is not so good.

I tried to clean it . But no result no changes !!!

Please help me how can I change or improve it.

Regards,
Erdene

j0nblayz
09-21-2005, 10:02 AM
easy fix, well easy if you know how to remove the camera, i had the same problem as you and i thought it was the camera, but in reality its only the outer glass lens. open up your ux, and remove the camera module, and you'll need to take apart the camera module, what happens is that the glass lens is not fully sealed so dust and such gets stuck under the lens, so you need to clean under the glass lens. I do not recommend doing this since theres a good chance you might rip the camera flex cable, and if you do you will need to buy a new camera module, which in canada from sony costs around $160(CAD). So if you do go ahead with this fix, be VERY VERY VERY careful, infact you may wanna bring it in to a local sony repair shop and get that cleaned.

Newuser
09-22-2005, 03:16 AM
Thanks you for your reply. I wanna to clean it. Is it too hard or too complex ?

Do you have a instruction how can I disassembly camera module ?

Regards,

NewUser
09-23-2005, 05:11 PM
hello

I cleaned it. But there is no LENS. Just camera. Before a camera there is a just small hole. After this hole just a camera.