c3p9
09-12-2005, 03:51 PM
Dear friends from 1src,
this is my first post and it seems I'm awaiting activation so maybe this is the wrong place but it's the only I have access to so far.
This one goes for the Mechanical Engineers and such arround there...
Please check http://www.infosystemspro.com/isofits.html
ISOFits is a new application which calculates limits and fits according to ISO 286-1:1988 and ISO 286-2:1988.
Main features are: ISOFits calculates and displays limits and fits for shaft / hole combinations in accordance with the standards set forth in ISO 286-1:1988 and ISO 286-2:1988. Analyze known fits (what are the parameters of a 12 H5/d3 fit?), synthesize (find) the best possible fits given minimal input (I need a 25,4 mm basic size, shaft-basis, interference fit, with -25 um to -45 um clearance), view the three primary ISO 286 tables (standard IT tolerance, shaft and hole deviations), even scroll through a series of fits customized per your design rules.
It's going to be released Mid/September... :)
this is my first post and it seems I'm awaiting activation so maybe this is the wrong place but it's the only I have access to so far.
This one goes for the Mechanical Engineers and such arround there...
Please check http://www.infosystemspro.com/isofits.html
ISOFits is a new application which calculates limits and fits according to ISO 286-1:1988 and ISO 286-2:1988.
Main features are: ISOFits calculates and displays limits and fits for shaft / hole combinations in accordance with the standards set forth in ISO 286-1:1988 and ISO 286-2:1988. Analyze known fits (what are the parameters of a 12 H5/d3 fit?), synthesize (find) the best possible fits given minimal input (I need a 25,4 mm basic size, shaft-basis, interference fit, with -25 um to -45 um clearance), view the three primary ISO 286 tables (standard IT tolerance, shaft and hole deviations), even scroll through a series of fits customized per your design rules.
It's going to be released Mid/September... :)