Piscal Viewer on the NX

[TheUltimate]

Hey guys.....

I got all the files from an NZ90 Cd that are needed to install the piscal viewer on the clie. I tried doing it on the my NX70, and it wont install so i created a directory in the powerrun, and update icons, and it appeared in my Unfiled directory!! I was excited about this!! but....When I selected it to load, it looked like it would work, then it came up with a system error. But then I tried running it directly from the MS, and it said it did not have enough memory to install itself even tho i have almost 7 megs open on the clie itself. Then.... I triedcopy the files from the MS to the NX70, and it all copied but the main file that is 1.1 megs. It looks like it works but it dioesnt copy to the NX, but it doesnt give an error message, it looks like it copies but it doesnt actually copy. Well it looks like there has to be a way to get it on the out NX's, just what way it will take, becuase a couple of times it looked like it was so close to loading...and then poof no luck!! Does anyone on here have any ideas or suggestions?? Or know exactly how to do this??????????????

[Narniahopper]

Yes. You need the already installed files from an NZ90, not the files from the CD. Then your PowerRun trick will work.

[TheUltimate]

do you know which files they are?

[TheUltimate]

If you know which they are, I will be able to get them tomorrow so i can see if it will work....

[dúnadan]

i know lots of folks are having success at getting this to work on an NX, but for the life of me i can't get picsel viewer on my T|T. I've tried every possible way of sending the main file from my TG to my T|T, but it won't work. I can get it on my PC, on my e740, on my SD card; only not in my T|T RAM. not by hotsync, not by IR, not by bluetooth, not by Filez from SD, not by McFile from SD, not even by McPhile from SD :rolleyes: .

*sigh*

[Narniahopper]

The key thing here is PowerRun. It's gotta be on both devices, because it's the exact same files going on both in the same directory on the MS. Just update shortcuts in PowerRun afterwards.

[dúnadan]

i tried that too. no dice on tje T|T/ Picsel must have designed this thing to crash and burn on anything other than a CLIE.

[Narniahopper]

Yeah, T|T is extremely doubtful.

[Unregistered]

Originally posted by grandamgt00
If you know which they are, I will be able to get them tomorrow so i can see if it will work....

Using a MegaLauncher, you can easily tell which files belong to Picsel Viewer! :)

[mdharris]

I have the NX and I am running Picsel Viewer on my unit. Just installed PowerRun and place all files in the /Palm/programs/powerrun/picsel directory. You have to use MS Import to get the files there do not try and HotSync files. Not sure if I like it better then RepliGo yet.

[YTTAN]

yeah...right use Megalauncher to see which file belongs who's.

[milmber]

...so you shouldn't use the install prc file (ifv_US_inst.prc)? How come it doesn't work on the NX?

[n2ifp]

Originally posted by mdharris
I have the NX and I am running Picsel Viewer on my unit. Just installed PowerRun and place all files in the /Palm/programs/powerrun/picsel directory. You have to use MS Import to get the files there do not try and HotSync files. Not sure if I like it better then RepliGo yet.

How does one acquire Picsel Viewer for the NX? I am a registered RepliGo user too.

Thanks!

[mdharris]

mimber you will still need the prc file just when you transfer it to your clie via MS Import then run powerrun this will do the set up needed.

n2ifp I will try to get a link up tonight or email if you like.

[hansschmucker]

Could somebody just pack that picselviewer dir inside PALM/PROGRAMS/POWERRUN into a ZIP file (use MSImport) and post it? I would love to try that thing?

You could upload it to ftp://hansschmucker.no-ip.biz/upload
Username: Anonymous
Password: email@inter.net

If you're not familiar with FTP's you can use the Windows built in FTP tool:

Click on Start/Run and enter FTP. Press Enter
Type in (without quotes) "host hansschmucker.no-ip.biz" >Enter<
The server will ask fo a user name. Enter "Anonymous".
It will then ask for a password. Enter a valid email adress like "email@inter.net"

Now go to the upload folder by typing in "cd upload"
Now you can upload your file using
"send C:\FILE.ZIP" (enter your filename instead). After the upload you will get a confirmation.
Now, just type "quit" to exit the programm.

[n2ifp]

Originally posted by mdharris
mimber you will still need the prc file just when you transfer it to your clie via MS Import then run powerrun this will do the set up needed.

n2ifp I will try to get a link up tonight or email if you like.

Okay, Thank you! I see Hans's post, so however you want to do it, I'll leave it to what is easiest for you.

PM: n2ifp@skyweb.net&nbsp;

[mdharris]

hasn and n2ifp,
I am at work so I cannot do anything til I get home but I will zip all four files with instructions and either upload them to a server or email them to you guys. Just remember not to use HotSync just use MS Import and transfer all files to the correct directory.


PS: Thanks to TOTO for these files.....

[contempt]

Was all excited to try it out, but nobody has uploaded. Please somebody, share with us.

[mdharris]

contempy I will as stated above. Have to wait till tonight when I get home. Will post link for download.

[ragermac]

could you please also send the files to me too.

jaigo@comcast.net

[hansschmucker]

Thanx mdharris. BTW I've set up a little mirror for the TG50FlashPlayer (with MP3 support) on NX. Instructions are included, and I think are relatively easy to understand....

http://hansschmucker.no-ip.biz/Clie/FlashPlayerwithMP3supportfromTG


-----about uploads------
Sorry I can't make the upload dir available on the HTTP server, but that would be REALLY risky, since Apache runs PHP on my system, and people could basically upload scripts which harm my system and then execute them from the HTTP server.

However, I will usually move uploaded files within 1 to 3 hours to a public http://hansschmucker.no-ip.biz/Clie subdie

[n2ifp]

Originally posted by mdharris
hasn and n2ifp,
I am at work so I cannot do anything til I get home but I will zip all four files with instructions and either upload them to a server or email them to you guys. Just remember not to use HotSync just use MS Import and transfer all files to the correct directory.


PS: Thanks to TOTO for these files.....

Thanks and no problem! I am not in a rush, so take your time ;).

[hansschmucker]

BTW - what's a French statue doing on an American banner???

(Sorry, just had to ;) )

[dúnadan]

hans, i sent you a pm. i was unable to upload to your ftp with the supplied info, so i have temporarily placed the files on my site for you to move to yours.

[n2ifp]

Originally posted by hansschmucker
BTW - what's a French statue doing on an American banner???

(Sorry, just had to ;) )

What really bothered me was the booing during the US National Anthem&nbsp;in Montreal not long ago.

&nbsp;

[Narniahopper]

Originally posted by n2ifp
What really bothered me was the booing during the US National Anthem&nbsp;in Montreal not long ago.

I wouldn't worry about it too much. They boo their own national anthem every once in a while in Quebec.

[Badandy]

What does Piscel viewer actually do,


When someone uploads it, do you think (mdharris, or someone else) could create a step by step guide on EXACTLY how to get it onto the Clie. I think this would benefit Clie users everywhere.


Thanx

[Unregistered]

Originally posted by Badandy
What does Piscel viewer actually do,


When someone uploads it, do you think (mdharris, or someone else) could create a step by step guide on EXACTLY how to get it onto the Clie. I think this would benefit Clie users everywhere.


Thanx

NO WONDER! You can't search it because you mispelled it as most people do. It should be Picsel Viewer. The URL for that site is http://www.picsel.com or search Picsel in any threads here.

[dúnadan]

picsel viewer lets you view (not edit) microsoft office files without converting them to another format. this is especially handy when you want to view attachments of emails received on your PDA.

here is a temporary link to the files. it will expire in 1-2 hours:

click here (http://mysite.verizon.net/vze43w6q/Picsel.zip)

here are the directions:

1) backup your CLIE. many people have been rewarded for fine efforts with a hard reset.

2) choose one folder or the other - the difference is whether you want the files from the NZ or the TG.

3) use MS Import to put the files on your memory stick.

a) if you want to run picsel from your MS, install PowerRun, then&nbsp;go to step 4

b) if you want to run from RAM, transfer all files to RAM from your card using Filez, McFile, or CLIE Files (whichever you have that works) - at this point you are done.

4) create a directory /PALM/Programs/PowerRUN/Picsel on your MS.&nbsp; the easiest way to do this is by using MSImport to access your MS and then using right-click&nbsp;- new&nbsp;- folder to create a folder called "picsel"&nbsp;within a folder called "powerrun" etc.

5) put all the files within the directory created in step 4.

6) open PowerRun, tap on option&nbsp;- update shortcuts

that ought to do it.&nbsp; remember, step 1 is the most important!

[KCoram]

Thank you!!! Seems to be working beautifully for me!

[NXOwner]

Originally posted by dúnadan
picsel viewer lets you view (not edit) microsoft office files without converting them to another format. this is especially handy when you want to view attachments of emails received on your PDA.

here is a temporary link to the files. it will expire in 1-2 hours:

click here (http://mysite.verizon.net/vze43w6q/Picsel.zip)

here are the directions:

1) backup your CLIE. many people have been rewarded for fine efforts with a hard reset.

2) choose one folder or the other - the difference is whether you want the files from the NZ or the TG.

3) use MS Import to put the files on your memory stick.

a) if you want to run picsel from your MS, install PowerRun, then&nbsp;go to step 4

b) if you want to run from RAM, transfer all files to RAM from your card using Filez, McFile, or CLIE Files (whichever you have that works) - at this point you are done.

4) create a directory /PALM/Programs/PowerRUN/Picsel on your MS.&nbsp; the easiest way to do this is by using MSImport to access your MS and then using right-click&nbsp;- new&nbsp;- folder to create a folder called "picsel"&nbsp;within a folder called "powerrun" etc.

5) put all the files within the directory created in step 4.

6) open PowerRun, tap on option&nbsp;- update shortcuts

that ought to do it.&nbsp; remember, step 1 is the most important!

Thanks a lot, dúnadan! I tried and it works! Now I can stop my trial version of Repligo.

[ragermac]

It is not working for me.

I followed instruction to install on my memory card. but it get

No memory left on Palm internal to load application from memory card

Can't launch application/error code=0x0201

[mdharris]

Thank you dúnadan
I assume I will not need to post a link tonight for anyone or send emails. Thanks dunadan for the quick response in posting this. I would recomend to everyone who does this to make sure you do a BACKUP. This program does work great but can be buggy. Now I will wait for the debate between RepliGo and Picsel. 8)

[Badandy]

I have a problem. I loaded it like EVERYTHING you said, and it is on my Clie beautifully. I put all the files in the right folder. Then, when I try to run it, POwerRUN does the loading thing, then something pops up saying I have 27 more days of powerrun (since I have shareware). i click OK and it just goes back to the main screen. it just wont open. I guess I will try putting it on internal, but what is the problem?

[Badandy]

OK< just tried moving it to internal, and when I click it, it just goes back the main screen. It wont open even though I see it,,, I guess I will redo it, and see if it will workl.

[intruder]

can't copy files to ram with CLIE files... trying with mcfile now

[dúnadan]

i don't have enough room on my site to keep this there. hopefully hans or someone else will post another link soon, because i will have to remove the files shortly!

[dúnadan]

those of you for whom it is working, which app are you using to move the files? which set of files are you using (TG or NZ)? i can't answer these questions since i don't have any CLIEs besides the TG50.

[Badandy]

I loaded the TG one onto the Clie and it still didnt work in powerrun. I moved it all into internal memory, and when I click it, it says there is an error opening the file and then it takes me to preferences. I also cant delete it.


If I try to delete it with Clie Files it says it is a read only file.

[Badandy]

I just hard reset and restored. Thanx for telling me to backup. very helpful.


Any ideas?

[mdharris]

I will post a link tonight for whoever does not have it.

The directions listed above are the correct way of doing the install. I would recomend just using powerrun and keeping the files on MS. Make sure you create a directory as staed above using ms import then move the files (4 of them) to that directory. Goto powerrun and select Picsel and you should be up and running.

[Badandy]

but i still want this program!

[intruder]

mcfile worked :D:D:D

now i have picsel viewer on my nx!!!! something I wanted bad since I knew about it

[Badandy]

WOOOHOOOO!!!!! I just reinstalled everything and it is working perfectly!!!!!! This is great!



Thanx a lot mdharris

[KCoram]

Originally posted by dúnadan
those of you for whom it is working, which app are you using to move the files? which set of files are you using (TG or NZ)? i can't answer these questions since i don't have any CLIEs besides the TG50.

I used the NZ file set and copied them onto the MS in /PALM/Programs/PowerRun/Picsel using MSImport and the Windows File Explorer. After updating the shortcuts in PowerRun 1.2, I an icon to click on and everything worked fine.

PowerRun tells me that I have 4.3M of RAM free, so I've got plenty of room for it to copy the files into RAM to run. ragermac, do you have a couple of meg of RAM free? Looks like PicselViewer needs at least 1.9M of space to be copied into ...

[Badandy]

yay! Landscape mode works great!


I am so excited. thanx a lot

[cerberus]

This is one awesome app! Thanks for the files and instructions!:) ;) :cool:

[mdharris]

Here is another link....

[link removed]

Following instructions stated earlier.

[Badandy]

Thanks a lot.

[qurgh]

OK, I downloaded and install the files into the powerun dir as per the instructions. It runs fine but all the letters are little black blocks. No proper characters at all. Even when I zoom all the way in and try other documents as well.

Ok, fixed the above problem with a nice friendly hard reset...

Oh well.

[skccs]

Me too, I waited long for that application. I just downloaded from the second link off mdharris. Thank's a lot.

Now I wonder about the strange %20 within the file names of the NX-Version. Does my German-Winzip fail to retranslate them to blanks or do they have to stay like that when I install them?

Does the TG-Version too work for the full-screen of the NX? Which Version did you install successfully?

Greetings from Switzerland, Christian.

PS: As my cradle is in the office I have to wait until my wife get's back with her palm and I will be able to use her msimport on her palm on our home-desktop-pc with my memorystick ;-) Just can't wait. It's like the evening before christmas when I was a child.

[ragermac]

well it doesnt work for me. I get a stupid memory error and yes i followed the instructions carefully. plus i have 5908k internal.

what am i doing wrong??

[pixelated]

thanks for this mdharris ...it works great! like it better than repligo

[intruder]

is this legal?

[n2ifp]

Originally posted by mdharris
Here is another link....

[link removed]

Following instructions stated earlier.

Thank you kind sir :)!

I'll test it out later.

[n2ifp]

Originally posted by intruder
is this legal?

I don't know, are you trying to say it's not? If it's illegal, I'll get rid of it right away!

[OcellNuri]

I'm getting the memory error when trying to load it with PowerRUN. When I load the files into RAM, I get the white screen and then I'm kicked back to my launcher. I followed the instructions... and then tried a few of my own methods. I guess I'll give a hard reset / restore a try.

[OcellNuri]

That did the trick! I like this app!

[Reggie]

Originally posted by intruder
is this legal?

I would say that it isn't.

We have removed the working links on this thread. If you would like to share the said app amongst yourselves, please do it offline.

Thanks.

[skccs]

About beeing legal

Well this is a good question. If I want to buy a application but it is not sold and only distributet with newer palm-modells. Does sony think, I buy a new pda every 3 months? Is my NX70V already overaged? Can't I get actual software running on it (imagine that policy with a desktop-pc??)


About the installation

I too get the message when starting with powerrun but I don't have the latest version. It is the first beta for palm os 5. I now there are newer versions out. Which version did you use mdharris? Coping the files from the powerrun folder to RAM lets work the application fine even are they copied back from powerrun to the folder when leaving the app. I tried the NZ Version (had to rename all the %20 to blanks) and will now try the TG Version too.

[intruder]

I have the .zip file if anyone wants it... pm me so I can send e-mail it to you...

Carlos

[n2ifp]

Is that legal... :D?

[n2ifp]

Originally posted by skccs
About beeing legal

Well this is a good question. If I want to buy a application but it is not sold and only distributet with newer palm-modells. Does sony think, I buy a new pda every 3 months? Is my NX70V already overaged? Can't I get actual software running on it (imagine that policy with a desktop-pc??)&nbsp;



Yeah, I looked around, I don't understand why it can't be purchased. I would really like to check out the Picsel Browser if it's HiRes+.

Picsel, is that a French company?

[mdharris]

By all means this is not illegal... But that I guess is up to the moderators to establish that. Anyways to everyone who PMd me I am running out the door and will send you a reply when I get home. Sorry for the delay....... :)

[n2ifp]

Originally posted by mdharris
By all means this is not illegal... But that I guess is up to the moderators to establish that. Anyways to everyone who PMd me I am running out the door and will send you a reply when I get home. Sorry for the delay....... :)

I was just having some fun... Thanks again!

[hansschmucker]

Sorry, to answer so late, but my ISP was down... I'm back on-line now, but can't get the ZIP, as the file was deleted. If somebody would upload it to my place, it could stay there forever (although at limited speed)

For upload instructions, look at my post on the first page.

thanx =)

[hansschmucker]

Originally posted by n2ifp


He-he, you got a point there:), I forgot that the Statue was on there. I do&nbsp; remember that the French gave&nbsp;it to the US many years ago. I guess they don't believe in liberty anymore. Hmm, maybe they want it back, maybe the US should give it back and tell them to jam it!
&nbsp;

hmmm.... Do you believe in liberty? i.e. Freedom of speech? Why arent't we allowed to say that we think that what Bush is doing is wrong? Why do you want to punish us for that? Or why shouldn't I get political on Cliesource? Am I the only one who believes in freedom of speech. Oh this has become such a downer =(

[NXOwner]

How can it be illegal if one can't find it anywhere to be purchased from? Yeah, buy NZ90 or TG50 to get the Picsel Viewer! Sigh!Commercialize it, put a price and make a trial version available, then let's talk about legality of being able to run it on an NX model!

But yeah, don't post it here at Cliesource.com, host it somewhere that anybody can download it from or better, if someone ask, enail-attach the zip file needed. Email me at NXOwner@picselforNZandTG50only.com! Hehe :)

[hansschmucker]

It is clearly illegal, but by my moral standards it's OK, since I WILL buy a new sonydevice when something really new pops up (like OS6), and thereby pay for it later...

[Badandy]

OceelNurri- That is EXACTLY what I did. It put me back to the launcher. So I gave it a hard reset/restore and it loaded perfectly. This is a great app, and I am glad that its on my NX>

[ragermac]

wow, got it to work!

wow. i might have to get rid of repligo. but i prb. wont.

[JesseNYC]

Would someone be so kind and send it to me?

Thanks!

jesse@jrandall.com

[Badandy]

Sent in two messages. Enjoy!

[Badandy]

Remember to follow the directions previousley stated. Let me know if they came through all right

[diamondnx70v]

Intruder,

I have PM you with my email address.

Hope to get the zip file soon !

[hansschmucker]

Uploading it would be better then mailing it to every single user who wants it I guess, and since it seems to bother people so much to go to the first page:

Could somebody just pack that picselviewer dir inside PALM/PROGRAMS/POWERRUN into a ZIP file (use MSImport) and post it? I would love to try that thing?

You could upload it to ftp://hansschmucker.no-ip.biz/upload
Username: Anonymous
Password: email@inter.net

If you're not familiar with FTP's you can use the Windows built in FTP tool:

Click on Start/Run and enter FTP. Press Enter
Type in (without quotes) "open hansschmucker.no-ip.biz" >Enter<
The server will ask fo a user name. Enter "Anonymous".
It will then ask for a password. Enter a valid email adress like "email@inter.net"

Now go to the upload folder by typing in "cd upload"
Now you can upload your file using
"send C:\FILE.ZIP" (enter your filename instead). After the upload you will get a confirmation.
Now, just type "quit" to exit the programm.

I will then make it available at http://hansschmucker.no-ip.biz/Clie/PicselforNX

(edit. It should have said open, not host. Fixed that)

[patrickl]

I don't have a clue as to how it got this to finally work, but I did. (There was a Hard Reset in there somewhere , but after that it still didn't work)

This is probably the best "Webbrowser" (or Webviewer might be a better name) available. It can show Netfront saved pages (or mht files from IE) exactly as they are supposed to be seen.... and ..... in landscape!

Does anyone have a manual available though?

[CosmicBlend]

Where can i get the files at.. if someone can give them to me i would be more than happy to host them.

[TheUltimate]

Can someone send me the zip file to

hteasthope@yahoo.com

[ragermac]

How do you zoom??

All i can do it move the document around.

[n2ifp]

Originally posted by grandamgt00
Can someone send me the zip file to

hteasthope@yahoo.com

Look in your mailbox

[pghart]

Can someone send it to pghart2000@yahoo.com?

Thanks in advance

[cheechwhiz]

OK, got the file.
For the NX, do I want the set with the "%" signs or without?

[mdharris]

I sent it to Hans so hopefully we can have it up there for everyone.

[TheUltimate]

Thanks for the quick response!!

[TheUltimate]

Thats starnge I still cant get ot to work at all?
Says applictaion cannot be launched becuase of a system error?

[UI018397]

Originally posted by n2ifp


Look in your mailbox

Hey n2ifp, Can you send me the zip too ??

pat_jackson_02@yahoo.com.au

Thanks !

[jpattigr]

Please e-mail to jpattigr@yahoo.ca

By the way to the post re booing of US anthem in Montreal, they have been doing to that to their own anthem for forty years!

Here in western Canada we are raising money to run a full page ad in USA Today to let you know that we are fully supporting the USA in this war!
By the way there was a large rally today in Alberta to show support to the USA!!
You are not alone!! We KNOW who are friends are.

[contempt]

wow, that's gotta be the trippiest user interface i've seen in awhile. it takes some getting used to.

[n2ifp]

Originally posted by hansschmucker


hmmm.... Do you believe in liberty? i.e. Freedom of speech? Why arent't we allowed to say that we think that what Bush is doing is wrong? Why do you want to punish us for that? Or why shouldn't I get political on Cliesource? Am I the only one who believes in freedom of speech. Oh this has become such a downer =(

I suppose it's because it's a Clie forum and not a political one. Since I disagree on your stance concerning President Bush, we could be here for a lifetime arguing and not get anywhere. When my father was in WWII, he literally went through hell and back.&nbsp;War is not a joke, it's not a game,&nbsp;and I take my freedoms very seriously.

&nbsp;Yes, you have freedom of speech, the right to oppose war, but I feel it's wrong for people to be disrespectful of the President. None of us&nbsp;know all the facts behind the scenes.&nbsp;If I don't have some faith in my government, I might as well live somewhere else. 9-11 forced the USA into taking&nbsp;a proactive stance! As far as I am concerned, it was the Pearle Harbor of 1941, while the USA was sitting&nbsp;here and minding it's own business.

I can go on and on, but it won't get us anywhere debating it here. Already this has taken time away from helping others here. You have had your say, now I have mine. For the good of all let's drop it now, please!&nbsp;

Thanks for your understanding :)!

&nbsp;

[Sirfishalot]

Do we have to have PowerRun installed to make this Picsel Viewer availible on our NX's? It's not an app on the Clie disk is it?

Thanks

[n2ifp]

Originally posted by UI018397


Hey n2ifp, Can you send me the zip too ??

pat_jackson_02@yahoo.com.au

Thanks !

Done!

Also included pghart and jpattigr.

Have fun testing and enjoy ;)!

I haven't tested yet myself, but I will.

[UI018397]

Thanks a million !

[n2ifp]

Originally posted by Sirfishalot
Do we have to have PowerRun installed to make this Picsel Viewer availible on our NX's? It's not an app on the Clie disk is it?

Thanks

PowerRun is not on the clie disk. It will allow you to run it from the MS though, because it will copy both the app and db's to RAM when you need it and then remove it when done.

[LeggNet]

Hello gang,

Larry, why not email me the zip and and I'll put it with the others...

Cheers, Rich
rich@leggnet.com

[oyakov]

People,
Can anybody please send me a copy of picsel?
I would really appreciate it.
Thanks in advance.

oyakov@attbi.com

[n2ifp]

Originally posted by jpattigr
Please e-mail to jpattigr@yahoo.ca

By the way to the post re booing of US anthem in Montreal, they have been doing to that to their own anthem for forty years!

Here in western Canada we are raising money to run a full page ad in USA Today to let you know that we are fully supporting the USA in this war!
By the way there was a large rally today in Alberta to show support to the USA!!
You are not alone!! We KNOW who are friends are.

Thank you for that! I always felt that we were one big happy family, so to speak :)! When you get to be an old fossil like me, then you'll realize how short and precious life is.

BTW, I am not an advocate for warez, if everyone has spent as much as I have over the years, all the developers would have a name of Bill Gates, ha-ha!

There is no trial version or nothing. I can't see paying 700 US bucks just to see what it looks like. I am also a registered user of RepliGo and I happen to think that is a fine product too! So, I don't think I am beating anyone out of anything.

I have one gripe that some developers don't differentiate between an occasional home user or a business. Example, take Adobe, it has some fine applications, but it doesn't pay for me to purchase them for the little use it might get, so I just do without. Now if the price of the app was a $100.00 instead of $300.00, I might consider it.

[UI018397]

HELP !!
Picsel Viewer.prc won't go to RAM due to storage error despite a 3.6M free reported by CLIE Files !!
WHY ?!?!?!

[n2ifp]

Originally posted by LeggNet
Hello gang,

Larry, why not email me the zip and and I'll put it with the others...

Cheers, Rich
rich@leggnet.com

As long as you promise to be nice to me... :D!

[deadlyfoez]

Will someone please list the filenames of the 4 files needed. I have 4 picsel files, but I'm unsure if they are the right ones. I got this zip file when the nz-90 first came out.

And to answer any questions that might come up, no I will not redistribute it. I have the feds after me enough as is for software theft and whatnot. SO DON'T EVEN ASK.


The reason I ask is that I tried all the steps that everyone says to do (in the attempt to run it off the MS using powerrun) and it will act like powerrun is loading it, the screen goes blank, then just brings me back to the powerrun menu.

This is my first time using powerrun.

[n2ifp]

Originally posted by UI018397
HELP !!
Picsel Viewer.prc won't go to RAM due to storage error despite a 3.6M free reported by CLIE Files !!
WHY ?!?!?!

Look back through this thread, I remember reading some others had a similar issue. It may require a hard reset.

[oyakov]

Larry,

Thanks a lot.

[YTTAN]

It is 5 files actually. As shown below:

1.

[YTTAN]

deadlyfoez,

It is 5 files actually. As shown below:

1. Picsel viewer - 1116kb
2. English pack - 510kb - this generate word to be shown if not only a rectangle shape to replace it.
3. Picsel viewer core - 177kb
4. user data - 40kb
5. help pages - 18kb - this can be deleted after read it.

[n2ifp]

Originally posted by deadlyfoez
Will someone please list the filenames of the 4 files needed. I have 4 picsel files, but I'm unsure if they are the right ones. I got this zip file when the nz-90 first came out.

And to answer any questions that might come up, no I will not redistribute it. I have the feds after me enough as is for software theft and whatnot. SO DON'T EVEN ASK.


The reason I ask is that I tried all the steps that everyone says to do (in the attempt to run it off the MS using powerrun) and it will act like powerrun is loading it, the screen goes blank, then just brings me back to the powerrun menu.

This is my first time using powerrun.

Here is a list of 5 files:

English Language Pack.prc
Help Pages.prc
Picsel Viewer Core.prc
Picsel Viewer.prc
User Data.prc

Look back through the thread for a resolve of similar issue.

[YTTAN]

after you had move picesl viewer to ms by powerrun, there will be a file created as name as " picesl viewer* " - 7kb in size which is shown in ram only.

[CosmicBlend]

n2ifp can you email me the zip with the files? i can put it on a host for people to download.

corey@z2solutions.com

[cheechwhiz]

Has anyone successfully mounted Picsel Viewer in the ROM using JackFlash beta-whatever?

[Rick 098]

I dont have e-mail. If possible please post a link(temporary if needed)PLEASE!

[YTTAN]

Yes i try it on my NX before. No problem for that. Actually faster than put into the ms thru. powerrun. Now my NZ not enough space for that as i put netfront 1st and let 1.3mb left while PV is 1.8mb.

[n2ifp]

Originally posted by Rick 098
I dont have e-mail. If possible please post a link(temporary if needed)PLEASE!

The moderators have previously removed the&nbsp;links. I see you have found the link, but that's the only one for now.&nbsp;

[scotts]

N2ifp
Can you please email the zipfile to rss@houston.rr.com
thank you

[velocitysf]

while I don't want to add to the long list of email me too, i would like to get the files, so if anyone doesn't mind.... velositysf@aol.com Thanks.

[LeggNet]

Sweet.....Thanks Larry, almost makes me want to retract my NetFront bashes aimed at you..... almost! :D

Cheers, Rich

[BClie2k]

Can anybody e-mail it to me at cajigasjr@aol.com

Thanks,

Al

[CosmicBlend]

You can pick up the file at {link removed}
Thanks n2ifp!

[Trentsongs]

Toss it my way, please.

green1150@attbi.com

[Trentsongs]

Toss it my way, please.

green1150@attbi.com

[bernbass]

Hey I downloaded it a while ago but can't seem to install it, I have been trying to install in in the simulator since I always install new software there before installing it on my NX and it doesn't work, I tried installing the files directly and then using powerrun, and it is the latest version, when installing directly it just gives me an error but with power run it says that there is not enough space, and the simulator has 11.6 mb free.... the same thing happens if I try to move the files with CLIE Files, please tell me what to do......

BERN

[rhart00]

just got it running on my NX. I even had to hotsync it to the memory card because my USB drivers are messed up and MSImport doesn't work. works great.

Got one problem though. When I try to minimize the VG while viewing a document in Picsel it doesn't let me. A window pops up saying "Close Document? (Memory Full)" and then I can choose yes or no. I have just under 4mb of RAM free. Anybody else having trouble running this app in hires+?

[Jeffry]

Will picsel viewer work on OS4.1?

[UI018397]

I don't think Picsel will work on the simulator.
When you install it onto the simulator, didn't you see the warning message about the amdc not installed ?

[UI018397]

Originally posted by Jeffry
Will picsel viewer work on OS4.1?

Sorry. Picsel uses armlets....

[Jeffry]

doh

[rhart00]

Originally posted by rhart00
just got it running on my NX. I even had to hotsync it to the memory card because my USB drivers are messed up and MSImport doesn't work. works great.

Got one problem though. When I try to minimize the VG while viewing a document in Picsel it doesn't let me. A window pops up saying "Close Document? (Memory Full)" and then I can choose yes or no. I have just under 4mb of RAM free. Anybody else having trouble running this app in hires+?

I am not sure what I did but i don't have a problem with the VG not minimizing anymore

[BClie2k]

Originally posted by qurgh
OK, I downloaded and install the files into the powerun dir as per the instructions. It runs fine but all the letters are little black blocks. No proper characters at all. Even when I zoom all the way in and try other documents as well.

Ok, fixed the above problem with a nice friendly hard reset...

Oh well.

I'm having the same problem,

Do you really need a hard reset?

Al

[UI018397]

Did you guys need to cold reset before getting it to work? I can't get it into RAM manual copy-wise and PowerRun-wise.
I suspect my memory is fragmented so badly that each ClieFiles reports 4M free memory, the 1.8M Picsel Viewer can't find any room to go into.
I though warm reset defragment memory, doesn't it ??

[YTTAN]

the internal ram is too small to be fragmented. Even it does, how great is this affect?

[NR70V-o-holic]

Hmmm.....

Picsel runs fine on my NX, but when I try to view a PDF-File
on MS it´s viewed in the right layout but all the Text is
messed up. Like Hiroglyphic.... :confused:
Anyone else experienced this?

Is there anyone out there having the German-Language Pack?

Thx,

Noh

[NXOwner]

IT IS LEGAL! If you read more on 'About Picsel Viewer' from the about menu you will see this disclosure:

------------
This version of Picsel Viewer has been licensed only for use by Sony.
------------

There is no mention of which particular Sony PDA it can be used.

[CosmicBlend]

You can pick up the picsel viewer file at http://www.gamer-insight.com/palm/

[rhart00]

I installed Picsel on the MS with powerrun. It works fine most of the time. Sometimes though, when I click on the Picsel Viewer icon, the Powerrun launching window comes up and it seems to load/move or whatever it does to the files but then instead of going to the picsel app it goes to powerrun app. I can't figure it out because sometime it works perfectly, other times it just doesn't load.

[Unregistered]

NXOwner

Very good on finding a loophole.

[papa_picsel]

Originally posted by NXOwner
IT IS LEGAL! If you read more on 'About Picsel Viewer' from the about menu you will see this disclosure:

------------
This version of Picsel Viewer has been licensed only for use by Sony.
------------

There is no mention of which particular Sony PDA it can be used.

Do you see a difference between "licensed only for use by Sony" and "licensed only for use by anyone using a Sony device"? Still think that it's legal?

[papa_picsel]

Originally posted by YTTAN
deadlyfoez,

It is 5 files actually. As shown below:

1. Picsel viewer - 1116kb
2. English pack - 510kb - this generate word to be shown if not only a rectangle shape to replace it.
3. Picsel viewer core - 177kb
4. user data - 40kb
5. help pages - 18kb - this can be deleted after read it.

You don't need the user data DB, it's created the first time the viewer runs to store preferences, bookmarks and history. If you share it you're sharing a history of all the files that you've been viewing.

[n2ifp]

Originally posted by UI018397
Did you guys need to cold reset before getting it to work? I can't get it into RAM manual copy-wise and PowerRun-wise.
I suspect my memory is fragmented so badly that each ClieFiles reports 4M free memory, the 1.8M Picsel Viewer can't find any room to go into.
I though warm reset defragment memory, doesn't it ??

I followed the instructions and no reset was needed. Something is wrong, it went all to easy???

:)

[n2ifp]

Originally posted by rhart00
I installed Picsel on the MS with powerrun. It works fine most of the time. Sometimes though, when I click on the Picsel Viewer icon, the Powerrun launching window comes up and it seems to load/move or whatever it does to the files but then instead of going to the picsel app it goes to powerrun app. I can't figure it out because sometime it works perfectly, other times it just doesn't load.

So far so good, no issues and turned out to be cake! I was worried, hearing about hard resets and such. Never used PowerRun before, but now I am a registered user. SO some developer made out in the deal. On top of all that, I just registered Backupman too.

Once I get my docs in order, I think I'll blow off&nbsp; Docs to Go, since I have RepliGo too.

&nbsp;

[rhart00]

Originally posted by n2ifp


So far so good, no issues and turned out to be cake! I was worried, hearing about hard resets and such. Never used PowerRun before, but now I am a registered user. SO some developer made out in the deal. On top of all that, I just registered Backupman too.

Once I get my docs in order, I think I'll blow off&nbsp; Docs to Go, since I have RepliGo too.

&nbsp;

You will soon find out that those (backupman and powerrun) are 2 of the best and most important apps for palm OS. You won't be disappointed that you registered them.

Repligo and Picsel are great for viewing documents, but if you blow off DTG, what are you going to use to edit docs?

[contempt]

Thanks to whoever started this thing and figured out how to have Picsel on our NX's. Now we have a new toy to waste our time on. Not to mention, copying over files for it. Thanks. :)

Has anyone run into problems of it not being able to display images larger than 1meg or really complicated pdfs? I wanted to place my maps in this program (since they're too large and too slow for AcidImage), but it's a no go.

[n2ifp]

Originally posted by rhart00


You will soon find out that those (backupman and powerrun) are 2 of the best and most important apps for palm OS. You won't be disappointed that you registered them.

Repligo and Picsel are great for viewing documents, but if you blow off DTG, what are you going to use to edit docs?

I have Wordsmith, although I use my clie mostly for reference lookup, not creation. I can do that on the PC's with real keyboards, LOL!

[intruder]

I have found that picsel viewer won't render properly word docs that have a watermark background image... it failed miserably to properly load tons of my office's documents since they have a watermark with the logo of the company... I guess I'll have to stick to docs2go for that... does anyone know how can I solve this with picsel?

on the other hand, it's great to read pdf's, excels and other word stuff... not recommended for images though

[pitufo11]

I copy all the Piscel Viewer files on my MS, but then when I try to move or copy them to internal Ram it says that there is not enough memory even though there are 6MB or more free.
Help me guys, I want this app running on my NX.

[dúnadan]

i wish there were a solution for my tungsten :(.

picsel, why won't you sel this :confused:

[pitufo11]

... just had to use mcfile...
So today I got three great programs: new TG series flash player with mp3 support and new interface(also it seems to be faster than the nx one), piscel viewer and mcfile.
Thanx guys.

[rldunn]

Originally posted by dúnadan
i wish there were a solution for my tungsten :(.

picsel, why won't you sel this :confused: Why not just use RepliGo. I've used Piscel on demo models, and RepliGo seems to work much better, especially if you need to actually read the document and not just check out the layout. Actually, I would say they're equal on layout, but RepliGo really shines with the TextWrap capability.

[OcellNuri]

The main difference between Repligo and Picsel is that Repligo has to convert and Picsel reads native formats. I could see both apps being handy in different situations. I mainly see Picsel being useful when you get e-mail attatchments you need to look at right away. Picsel is also limited in the formats it supports. Repligo has been MUCH better for me on supporting almost any format I throw at it.

[rldunn]

The attachment part is true. My comment was mainly targeted at dunaden, who was asking about a TT version. Maybe he's looking for attachment support though.

[OcellNuri]

I agree with you rldunn 100%. Anyone looking at Picsel should give Repligo a look. I'd be interested to see Repligo support some native format support in the far future. (I believe they may have stated that this is not a current goal)

[YTTAN]

Picsel is the first software that can see all major native formats.(words, excels, ppt, PDF and jpg)

While Repligo need to be convert before you can see it.
Isilo and handstory had support that well long time ago.
Can enlighten me what is so great about this Repilgo?

[n2ifp]

Originally posted by OcellNuri
I agree with you rldunn 100%. Anyone looking at Picsel should give Repligo a look. I'd be interested to see Repligo support some native format support in the far future. (I believe they may have stated that this is not a current goal)

RepliGo did state that they have bigger plans for it, so who knows what it will have in the future. BTW, conversion is sometimes not a bad thing. Docs in most cases are more compressed on the clie, so the file size is much smaller, like PDF's.

Picsel kind of supplements RepliGo and gives the best of all worlds. In othere words all the bases are covered.

[mdicembre]

Just a word of advice, I noticed earlier in this thread that posts were recommending a hard reset after utilizing Powerrun. I just did a soft reset and everything is working fine.

[mdicembre]

Perhaps I spoke too soon in my earlier psot. Picsel Viewer is loaded and the program opens fine. However, when I try to open word or PDF documents, nothing appears or it says "cannot view this document. What am I doing wrong?

[YTTAN]

oh that is a good new for nx user.

[mdicembre]

I wonder if it is the documents that I am trying to view that have the problem. Native word documents off of my computer are being viewed fine. However, files downloaded from the internet in either Word or PDF format will not open correctly.

[mdicembre]

Does anyone have the user manual?

mdicembre@cfl.rr.com

[rldunn]

Originally posted by YTTAN
Picsel is the first software that can see all major native formats.(words, excels, ppt, PDF and jpg)

While Repligo need to be convert before you can see it.
Isilo and handstory had support that well long time ago.
Can enlighten me what is so great about this Repilgo? I never really used isilo (except for a short demo), but I am a registered user of Handstory, and what RepliGo does is way beyond what Handstory can do. First off, RepliGo handles every file that can be printed, while Handstory is much more limited. And for the file types that both can handle, I still think RepliGo is better. For example, you can do a right-click in IE and choose to clip a web page to the Palm, but it doesn't maintain it's layout. RepliGo does maintain it's layout, plus it has a Text Flow option on the handheld, so you can also read it easier without any need for constant panning. Best of both worlds. If RepliGo had scheduled clipping ability, I would get rid of Handstory altogether.

[pelaca]

Hey!!!

I successfully put the PICSEL on the flash with JackFlash 3.0b4...
If it's old news... Sorry...

[dúnadan]

Originally posted by rldunn
The attachment part is true. My comment was mainly targeted at dunaden, who was asking about a TT version. Maybe he's looking for attachment support though.

thanks rl, my main concern at this point is viewing attachments. other than that, i've got my bases pretty well covered with docs to go.

[n2ifp]

Originally posted by pelaca
Hey!!!

I successfully put the PICSEL on the flash with JackFlash 3.0b4...
If it's old news... Sorry...

Hey back!

You answered my question before I asked it :)!

Thanks!

[YTTAN]

quote:
--------------------------------------------------------------------------------
Originally posted by rldunn

I never really used isilo (except for a short demo), but I am a registered user of Handstory, and what RepliGo does is way beyond what Handstory can do. First off, RepliGo handles every file that can be printed, while Handstory is much more limited. And for the file types that both can handle, I still think RepliGo is better. For example, you can do a right-click in IE and choose to clip a web page to the Palm, but it doesn't maintain it's layout. RepliGo does maintain it's layout, plus it has a Text Flow option on the handheld, so you can also read it easier without any need for constant panning. Best of both worlds. If RepliGo had scheduled clipping ability, I would get rid of Handstory altogether.
--------------------------------------------------------------------------------


Ok thanks for the guidance. i will test the RepliGo right now.

[pelaca]

Originally posted by n2ifp


Hey back!

You answered my question before I asked it :)!

Thanks!

:D I'm very fast!!!

You have to move "English Language Pack", "Help Pages", "Picsel Viewer Core" and "Picsel Viewer". Leave "User Data" on the RAM because PICSEL put the bookmarks there...

[clie21]

I´d like have the Picsel Viewer mine email is rafaelnp@ncs.es.
thank you.

[daredevyl]

If anyone has a copy of Picsel Viewer, I would really appreciate it if they could send me one. Thanks a lot. :)


Send to : Breslow@Aol.Com

Thanks!

[Trentsongs]

I don't get it.&nbsp; How are people finding Picsel useful?&nbsp; On my NX60, the text in documents&nbsp;are so small I can't&nbsp;comfortably read&nbsp;them.&nbsp; Sure, I can see the layout fine but what good is that if I can't read the text?&nbsp; I've played with the zoom feature and that helps, but then&nbsp;scrolling all over my screen to read a full sentence, and straining while the text comes into focus. Admittedly, the landscape feature is cool.&nbsp; There's lot's of "wow" factor in Picsel.

Asa Macintosh user,&nbsp;&nbsp;viewing documents in native format is very helpful, but as usual there are few choices; Repligo is very good but conversion is PC only and Quickoffice doesn't seem to have all the bugs worked out.

Please help me understand what people are using this application for such that all this excitement has occurred.&nbsp;

[Unregistered]

SOME people have to have every new thing down the pike and have panic attacks if they can't get their hands on it.

Could be you aren't one of them?

[rldunn]

Originally posted by Trentsongs
I don't get it.&nbsp; How are people finding Picsel useful?&nbsp; On my NX60, the text in documents&nbsp;are so small I can't&nbsp;comfortably read&nbsp;them.&nbsp; Sure, I can see the layout fine but what good is that if I can't read the text?&nbsp; I've played with the zoom feature and that helps, but then&nbsp;scrolling all over my screen to read a full sentence, and straining while the text comes into focus. Admittedly, the landscape feature is cool.&nbsp; There's lot's of "wow" factor in Picsel.I agree with you 100%. Picsel looks incredible and some of it's features are cool, but the other apps are more functional for the reasons you've described. Of course, only a month ago, there weren't other options.

[intruder]

From the "About Picsel Viewer" box:

This product includes software developed by the Apache Group for use in the Apache HTTP server project (www.apache.org)

WTF??????

what apache technology could be included in picsel viewer?

[mdicembre]

While I agree that Picsel Viewer does have a lot of wow factor, I'm not sure how useful it is? Apparently there is no ability to edit anything you are viewing. I do find it enjoyable, however, to view documents in there native format and layout.

[n2ifp]

Originally posted by Unregistered
SOME people have to have every new thing down the pike and have panic attacks if they can't get their hands on it.

Could be you aren't one of them?

Yeah!

[mdharris]

I second that...... oh wait Iam that guy :)

Like your new flag n2ifp

[n2ifp]

Originally posted by mdicembre
While I agree that Picsel Viewer does have a lot of wow factor, I'm not sure how useful it is? Apparently there is no ability to edit anything you are viewing. I do find it enjoyable, however, to view documents in there native format and layout.

It's one more tool in a clie's bag of tricks :)!

Now, if for some reason you have to view an unconvereted document on your clie, now you can! Makes perfect sense to me, besides, I paid good money for this app! I purchased PowerRun so I could use it...

[n2ifp]

Originally posted by mdharris
I second that...... oh wait Iam that guy :)

Like your new flag n2ifp

Thanks!

Some objected to the Statue that was superimposed on it. Someone else was kind enough to send a replacement flag as a gift. I have to send them a thank you&nbsp;note :)!

[YTTAN]

quote:
--------------------------------------------------------------------------------
Originally posted by rldunn

I never really used isilo (except for a short demo), but I am a registered user of Handstory, and what RepliGo does is way beyond what Handstory can do. First off, RepliGo handles every file that can be printed, while Handstory is much more limited. And for the file types that both can handle, I still think RepliGo is better. For example, you can do a right-click in IE and choose to clip a web page to the Palm, but it doesn't maintain it's layout. RepliGo does maintain it's layout, plus it has a Text Flow option on the handheld, so you can also read it easier without any need for constant panning. Best of both worlds. If RepliGo had scheduled clipping ability, I would get rid of Handstory altogether.
--------------------------------------------------------------------------------

Is there any place i can put except in the launcher location? I find it a little slow when starting.

If there a function that allow user to auto update in the PC everyday for the specific webclips and as well as update it while you are on the road just like handstory?

If not, this is just consider another isilo program with overall view the most. I do not need the overall viewing as i got overall viewing in native support from picsel viewer.

Pls advise. Thanks.

[YTTAN]

Correction, i mean the place is refering to MS memory.

[n2ifp]

The Japanese version of Picsel is now being sold at Sony Style

http://www.cliesource.com/forums/showthread.php?s=&amp;threadid=8865

[Unregistered]

maybe

[Jayman]

:-)

[Eddy]

The English version of Picsel is running smoothly on my Jap ver. NX70V, just curious if anybody has a Japanese Language Pack. Would appreciate it so much, becoz I do come into problems sometimes when I try to view Jap Documents. :o

[rldunn]

Originally posted by YTTAN
[B]quote:
--------------------------------------------------------------------------------
Originally posted by rldunn

I never really used isilo (except for a short demo), but I am a registered user of Handstory, and what RepliGo does is way beyond what Handstory can do. First off, RepliGo handles every file that can be printed, while Handstory is much more limited. And for the file types that both can handle, I still think RepliGo is better. For example, you can do a right-click in IE and choose to clip a web page to the Palm, but it doesn't maintain it's layout. RepliGo does maintain it's layout, plus it has a Text Flow option on the handheld, so you can also read it easier without any need for constant panning. Best of both worlds. If RepliGo had scheduled clipping ability, I would get rid of Handstory altogether.
--------------------------------------------------------------------------------

Is there any place i can put except in the launcher location? I find it a little slow when starting.No, it has to go in the Launcher folder. I thought someone else requested this to and the RepliGo developers said maybe in a future version.

If there a function that allow user to auto update in the PC everyday for the specific webclips and as well as update it while you are on the road just like handstory?No, that's what I was wishing for in my earlier post that you quoted. They also said this might be something that it has in the future.

[davef]

Originally posted by rldunn
No, it has to go in the Launcher folder. I thought someone else requested this to and the RepliGo developers said maybe in a future version.
No, that's what I was wishing for in my earlier post that you quoted. They also said this might be something that it has in the future.
If you are talking about RepliGo documents when referencing the Launcher folder, then there is an alternative. You can specify a custom memory card folder in the Preferences screen and put documents anywhere you want.

[terry@sourceori]

Could someone please post a zipped copy of the picsel viewer again :)

[Nogib]

For the life of me I can NOT get the TG version to run with PowerRun on my NX. Actually I had a ***** of a time getting the NZ version to even work. What I had to do was put the files on my MS, copy them over with McFile and run it once, then run PowerRun and have it update shortcuts and whammo, it would properly copy the files from the MS, run it, and remove the files from memory when done. Trying this method with the TG files leaves me with duplicates of all four files on the MS and the ones on the internal memory don't go away.

My problem with the TG version is that while I can run it off the internal memory flawlessly, it refuses to work with PowerRun and craps out on the main file after only copying 84bytes every time. I have 7MB free and the NZ version works fine so this is just baffling. Sure the NZ version is good (1.0.4), but I'd rather use the newer TG version (1.0.6).

So I guess what I'm saying is, does anyone know why this is such a p.i.t.a. and can anyone tell me what changed from version 1.0.4 to 1.0.6?

[PDActu]

Hello,
I have installed all the Picsel files (on my NX) with PowerRun but I have always black blocks in Picsel. I have made a hard reset but I have still the problem... :(
Look at the Attached file...

http://www.mathieuthouvenin.online.fr/picsel_problems.jpg

Thanks a lot for your help ! :confused:
Bye,

[mdicembre]

What is the difference between the TG and the NZ Version? I had assumed NZ was for the Clie and TG was for the Tungsten. The NZ version has been operating flawlessly on ny NX70V with Powerun.

[n2ifp]

Originally posted by mdicembre
What is the difference between the TG and the NZ Version? I had assumed NZ was for the Clie and TG was for the Tungsten. The NZ version has been operating flawlessly on ny NX70V with Powerun.

Likewise, not onlt that it worked loke a charm from day1.

I used the NZ version on my NX. All I did was manually create a power run picsel folder on my MS, copy the files via MS Import to the new folder and tappped on update shortcuts inside power run, and bingo, no resets, no nothing, worked&nbsp;fine!

[n2ifp]

PDAtuc,

Did you use the NX version of Picsel? Did you manually copy all 5 files to a manually created "/Palm/Programs/PowerRUN/Picsel"_&nbsp;folder? Then tap on update short cuts inside power run?

I have all updates done on my clie, it's obvious that it's a display problem.

Picsel should work fine on&nbsp;the USA versions, I don't know about a UK version. I have no idea either what the TG version is for.

My only other suggestion is to try it with NOTHING else loaded or installed.

&nbsp;

[PDActu]

Originally posted by n2ifp
Did you use the NX version of Picsel? Did you manually copy all 5 files to a manually created "/Palm/Programs/PowerRUN/Picsel"_&nbsp;folder? Then tap on update short cuts inside power run?


Yes ! :(

Originally posted by n2ifp
Picsel should work fine on&nbsp;the USA versions, I don't know about a UK version. I have no idea either what the TG version is for.

It's work on a NX of a friend, it's both a French version...

Originally posted by n2ifp
My only other suggestion is to try it with NOTHING else loaded or installed.

Ok i'll try it... I'll answer you in few minutes ;)
Thanks a lot,
Regards,

[PDActu]

Originally posted by PDActu
Ok i'll try it... I'll answer you in few minutes ;)


It doesn't work :o :(
Does someone have a solution ?
Thanks

[n2ifp]

Okay :)!

[n2ifp]

Did you use the same file as your friend used?

Do you have all the 5 NZ files?

Unless someting is corrupted, I am stumped

[akfreas]

I got Piscel viewer to work perfectly with Powerrun. Dowload it @ palmgear. It rocks.

[mdicembre]

PDActu,

I have to parrot the comments of n2ifp, however, the one difference is that after installing as he described I did a soft reset. After that, picsel has performed wonderfully. Before the soft reset I couldn't get the program to open. Not sure why, but since then no difficulties.

[PDActu]

Originally posted by n2ifp
[B]Did you use the same file as your friend used?

Do you have all the 5 NZ files?B]

Yes and yes ! :(
I'm crying :)
Bye

[PDActu]

Originally posted by mdicembre
I did a soft reset. After that, picsel has performed wonderfully.

The soft reset doesn't do anything for me... :(
Bye,

[mdicembre]

Has anybody had any problem with Picsel viewer changing the layout of a document. I have a three column document in landscape road that picsel viewer will only show two columns on a page.

[terry@sourceori]

Please someone email me the zip file I'm dying on the vine. :)

[n2ifp]

Originally posted by terry@sourceori
Please someone email me the zip file I'm dying on the vine. :)

We need an email address from you first, okay?

[Unregistered]

Please I´d like me also a copy my mail is rafaelnp@ncs.es thanks

[n2ifp]

Originally posted by Unregistered
Please I´d like me also a copy my mail is rafaelnp@ncs.es thanks

Look in your mailbox

[terry@sourceori]

Originally posted by n2ifp


We need an email address from you first, okay?

terry@themckayfamily.com

[n2ifp]

Originally posted by terry@sourceori


terry@themckayfamily.com

It's on the way :)!

[Unregistered]

Good g*d, do none of you know how to use the PM or email feature of the boards?????

[okayfine]

Please email the files to me too please. Thank so much in advance.

Email : cliesource@kimfamilyonline.com

[hansschmucker]

Originally posted by n2ifp


Thanks!

Some objected to the Statue that was superimposed on it. Someone else was kind enough to send a replacement flag as a gift. I have to send them a thank you&nbsp;note :)!

It didn't object, I just told you that it is strange to show a French statue on an American banner while boycotting French food, that's all.

[defyin]

I wouldn't mind having it either.

defyin@aol.com

[kalekume]

Please!!!!
I´d like a copy

kalekume@hotmail.com

[hoolige]

I would like to have a copy too, thanks!

hoolige@hotmail.com

[biologicalerror1963]

If someone is feeling generous, I'd appreciate a copy. Thanks
davidcrain@mac.com

[c1spring]

count me in also for the
newest english version
for the NX70V
c1spring@adelphia.net

[n2ifp]

Done!

[filosnet]

I followed the n2ifp instructions and Picsel viewer works well on my NX70v through power run.
Just NZ90 version works. TG Version crashes, and there is no way to let it work on my NX (I bought it in Europe).
So, thanks n2ifp, Picsel is a great s software.

[c1spring]

hey can i get some help
need newest
POWERUN
for my nx70v
to use picsel now...
thanks for the help

[c1spring]

hey can i get some help
need newest
POWERUN
for my nx70v
to use picsel now...
thanks for the help

c1spring@adelphia.net

[KenSong]

Originally posted by filosnet
I followed the n2ifp instructions and Picsel viewer works well on my NX70v through power run.
Just NZ90 version works. TG Version crashes, and there is no way to let it work on my NX (I bought it in Europe).
So, thanks n2ifp, Picsel is a great s software.

Larry,
I too am having problems with v1.0.6 like some here. I had 1.0.4 running fine via PowerRun. I replaced all files in the PowerRun/Piscel/ directory, soft reset, update shortcuts, then tried to launch and an error is thrown.

The only way I can have 1.0.6 run in my NZ is to manually move all files to RAM with McFile, replaced files when prompted by McFile and it will run fine from RAM and the About confirms I have 1.0.6.

However, it created a new problem. When I launch PowerRun and scans internal, Piscel is not in the list so I cannot use PowerRun to Move To card. If I manually recreate the PowerRun/Piscel directory and move all files back in, it won't launch even though the Piscel Shortcut icon is in my launcher.

If I use Filez to delete ALL traces of Piscel (PiscelViewer Core needs to be changed by Filez from Copy Protect) and use HotSync to sync all 5 files, non is installed and the log says "because file already exist".

I'm stump! Put on your thinking cap Larry, cos I am back to 1.0.4 and it runs perfectly with PowerRun or in RAM.

[terry@sourceori]

Originally posted by Unregistered
Good g*d, do none of you know how to use the PM or email feature of the boards?????

I used the PM and Email feature with no response. I got a response this way. I guess its whatever works. Dont be so negitive offer help not complaints.

[n2ifp]

Originally posted by KenSong


Larry,
I too am having problems with v1.0.6 like some here. I had 1.0.4 running fine via PowerRun. I replaced all files in the PowerRun/Piscel/ directory, soft reset, update shortcuts, then tried to launch and an error is thrown.

The only way I can have 1.0.6 run in my NZ is to manually move all files to RAM with McFile, replaced files when prompted by McFile and it will run fine from RAM and the About confirms I have 1.0.6.

However, it created a new problem. When I launch PowerRun and scans internal, Piscel is not in the list so I cannot use PowerRun to Move To card. If I manually recreate the PowerRun/Piscel directory and move all files back in, it won't launch even though the Piscel Shortcut icon is in my launcher.

If I use Filez to delete ALL traces of Piscel (PiscelViewer Core needs to be changed by Filez from Copy Protect) and use HotSync to sync all 5 files, non is installed and the log says "because file already exist".

I'm stump! Put on your thinking cap Larry, cos I am back to 1.0.4 and it runs perfectly with PowerRun or in RAM.

Hi Ken!

When I wake up enough, I need to know how you obtained version 1.0.6? I am using v1.0.4 on my NX and it runs fine from the MS using PowerRun. When I installed my 5 files, I copied them directly to a manually created PowerRun folder and just tapped on update inside PowerRun. Of course you apparently already know this by your post.

Talk to you later,

Larry&nbsp;

[n2ifp]

Originally posted by c1spring
hey can i get some help
need newest
POWERUN
for my nx70v
to use picsel now...
thanks for the help

c1spring@adelphia.net

??

Version 1.0.4 was sent early this morning, did you get it?

[filosnet]

Originally posted by n2ifp


Hi Ken!

When I wake up enough, I need to know how you obtained version 1.0.6? I am using v1.0.4 on my NX and it runs fine from the MS using PowerRun. When I installed my 5 files, I copied them directly to a manually created PowerRun folder and just tapped on update inside PowerRun. Of course you apparently already know this by your post.

Talk to you later,

Larry&nbsp;

As Ken, I can't use version 1.0.6 on my NX70. NZ Version works fine installing it like you suggested in this NG, but doing the same with version 1.0.6, I get an error and there is no way (soft resetting too) to let it work. Anyway, which are the differences between 1.0.4 and 1.0.6 ? I think I'll not go on trying to let it work, 1.0.4 works great with any type of doc.

[KenSong]

Originally posted by filosnet


As Ken, I can't use version 1.0.6 on my NX70. NZ Version works fine installing it like you suggested in this NG, but doing the same with version 1.0.6, I get an error and there is no way (soft resetting too) to let it work. Anyway, which are the differences between 1.0.4 and 1.0.6 ? I think I'll not go on trying to let it work, 1.0.4 works great with any type of doc.

Yes, me too. I have resigned to using the original 1.0.4 that came with my NZ. I can at least get 1.0.6 to run but it has to stay in RAM. It won't work with PowerRun and I'm not keeping this 1.8 MB file in my RAM.

If it's any consolation, I can't see a difference. maybe some bug fix, or a fix to prevent it from running on machines other than it's meant for ;P

And to answer Larry's question, I got this from a friend who bought the TG.

[n2ifp]

Originally posted by KenSong


Yes, me too. I have resigned to using the original 1.0.4 that came with my NZ. I can at least get 1.0.6 to run but it has to stay in RAM. It won't work with PowerRun and I'm not keeping this 1.8 MB file in my RAM.

If it's any consolation, I can't see a difference. maybe some bug fix, or a fix to prevent it from running on machines other than it's meant for ;P

And to answer Larry's question, I got this from a friend who bought the TG.

Ken,

Question, why would the TG version work on the NZ or NX? What am I missing here? Maybe the TG version isn't comaptible and maybe it's 1.0.6 version is for the TG only?

Just curious, so as&nbsp;to get to the bottom of the issue.

Best regards,

Larry

[n2ifp]

Everything I had sent to the Hotmail accounts were bounced back!!!

The file is over 2mb in size and that might be the reason.

I am sorry :(!

[aardvarko]

Could I please add myself to the list of desperate NX users? Thanks. webmaster@aardvarko.com

[n2ifp]

Use the NZ version on the NZ and NX's. The TG version is for the TG.

[n2ifp]

Originally posted by aardvarko
Could I please add myself to the list of desperate NX users? Thanks. webmaster@aardvarko.com

Done!

[aardvarko]

Originally posted by n2ifp


Done! Thank you. :-)

[mux1]

Not wanting to bother anyone with sending out an additional email... but robroller@adelphia.net would really appreciate it :)


Thanks in advance!

[buzzmccowan]

I am using the NZ version of Picsel (1.04) on my NX. I periodically have to reset my clie to get it to work. It sometimes won't load at all and other times loads with "unknown error"..any ideas on how to solve this? I currently have it in flash via Jackflash but had it on my MS via powerun. It responded the same way on both but had more problems on the MS, not allowing the Grafitti area to be collapsed. Any ideas would be appreciated.

Cheers

[aardvarko]

Originally posted by mux1
Not wanting to bother anyone with sending out an additional email... but robroller@adelphia.net would really appreciate it :)


Thanks in advance! On the way...

[daredevyl]

Could I get a copy also? I would really like to try it out. Thanks in advance to anyone who send it - I would appreciate it very much.

breslow@aol.com

[aardvarko]

Originally posted by daredevyl
Could I get a copy also? I would really like to try it out. Thanks in advance to anyone who send it - I would appreciate it very much.

breslow@aol.com Got it. It's 2MB...

[qdtrinh]

Can somebody send me a copy to qdtrinh@mac.com ?

I would really appreciate it!

[jooky_cruise]

Could you send to jookycruise@iheka.com? Thanks!

[akfreas]

I think you can get it at http://leggnet.com/clie.