General pix of the NX80

[ugokanain]

Took appart my NX80, and took some pictures.

[ugokanain]

Here are some more pictures

Also try
http://www.1src.com/forums/showthread.php?t=83327
http://www.1src.com/forums/showthread.php?t=83328

[ugokanain]

Here are some more pictures. These are taken with the cf tray removed. Interesting to see how they solved the problem of connecting the camera :cool:

[d^_^b]

can u learn me
how can i remove the back cover ???

[ugokanain]

You can use a flat small screwdriver or the the star screwdriver that brando (hk).
Two screws on the back, and the ones on the sides (long sides with all the buttons).
Pop open the cf slot and remove the two philip screws on the sides. You will have to rock the cf slot a little in order to get it off.
Remove the battery cover, and then the back cover slips off.

[SonyStyle]

did you try remvoing the lcd screen and putting it back on?

[Mauritus]

I recall that you opened your screen as well, do you have pictures of that?

and another question, have you felt your screen becoming less smooshy??
i mean, once it came out of the box the screen had a little travel between the digitizer and the actual crystal screen.

may be it is just me but, i have felt that now it is more flat. less travel. more hard if you may.

has this happened to anybody??? :(

[ugokanain]

You don't need to open the screen to remove the back cover. Do have another post with how to open the screen. As for the screen becoming less smooth, had a screen protector since I got the nx.

The digitizer is a plastic surface, which can be the worse for wear. pdaparts has a digitizer for the nx73 (don't know why it is different from the nx80) http://www.gethightech.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=GHT&Category_Code=DIG. However this should be a rather delicate operation, since if you don't do it right you could crack the screen (there is a strong adhesive between the two). Maybe a good screen protector could solve the wear. Had the thick brando protector, and worked fine for almost a year and a half.

[d^_^b]

my nx73v do not read ms pro at all
i take a look from the ms slot
and i notice there is a broken pin
can i remove the cover and check out ?? and fix it ???
any advice ??

[ugokanain]

The nx is a rather modular design. You should be able to replace it, however I think it is underneath the pcb (which would imply taking everything out, so I would suggest you don't try it without some experience disassembly things). I have gotten several parts from the same guy, and am pretty sure he should have the ms reader.

Joseph A Hirt
PalmMedic.Com
11902 NE 46th Street
Vancouver, WA 98682
(360) 606-5458 Tel
(360) 896-6217 Fax

[KenshinX]

do you have pictures of the screen trying to repair a Nx73v? thnx ur great man
and yes i do have a pretty good amount of experience at taking a part things (ie. T665c and buld computers) thnx any info or pics needed