PDA

View Full Version : Replacing faceplate


Gael
08-28-2004, 03:54 PM
Hi there, I've looked all over the net but can't find any directions on how to remove the faceplate for my TG50. I'd like to replace it with a new one. Is there a simple way, or do I need to take it completely apart?

Thanks!

arjay
08-29-2004, 09:09 PM
Hi there, I've looked all over the net but can't find any directions on how to remove the faceplate for my TG50. I'd like to replace it with a new one. Is there a simple way, or do I need to take it completely apart?

Thanks!

On page 99 of the Sony Read This First Operating Instructions, you can find the details on removing the protective cover if that's what you're talking about.

Basically, hold the device in your left hand and open the cover, pushing in with your left thumb on the hinge point on the left hand side of the device. Pull the right hand side of the cover up and away from the device. You should be all set!

arjay

Gael
08-30-2004, 04:31 PM
Thank you arjay, that did it. I actually bought the Tg50 used so it didn't come with a manual.

arjay
08-30-2004, 07:17 PM
No problem! Glad it worked for you.


arjay