Sony clie inserting video clip nx60 help!

[usernamer]

i just got my sony nx60 and i had a video about 50mb total called carmem.mpg and i tried putting the video on, so it did and it did not do anything on the movie player so i put it on the movie player folder and that didnt work, but i can put the video on when i use the image converter and i convert my video but it comes out only to be 7mb! like small part of it. but it played in my movie player. I have no other idea how i can put the FULL version in with out the image converter please help me! :confused: im so confused! i already have the ms export program and stuff.

[euro nx73 user]

>i just got my sony nx60 and i had a video about 50mb total called carmem.mpg
>and i tried putting the video on, so it did and it did not do anything on the >movie player so i put it on the movie player folder and that didnt work, but i can put
>the video on when i use the image converter and i convert my video but it
>comes out only to be 7mb! like small part of it. but it played in my movie >player.
>I have no other idea how i can put the FULL version in with out the image
>converter please help me! im so confused! i already have the ms export >program and stuff.

hi, i am new to clie's, but i have been following cliesource for ages, and like to think i know quite a bit, so here goes. (btw, i have a nx73, but i think the same things apply)
i think you will have to rename your file MOV00001 when you want to play it on movie player, but, you could download a patch that allows to to play mpeg videos, as far as i know.
as for the image converter, i am not sure, i don't have much experience with it, but i have converted a 75meg file, and in came out as a 28meg file at the end, and was fine, sound and video in sync. you could try downloaded MMplayer, it play natural mpeg etc. even divx, no personal experience again though, try the free trial at palmgear.com.
ah, try this. put it in this folder on the memory stick:
MQ_Root\100MQV01\"call the file MOV00001"
i believe that will work, i have done my best, but i think you will most likely need the help form the seniors, ie. egalus, mier87 etc. they know more or less anything, and one more thing, i would recommend search, it very rarely fails me on this site, as there is such a wealth of information.
hope i was of assistance, Dan

[usernamer]

i tried naming the file and putting them on where you told me, it did not play in the movie player, so i downloaded the mm player, where should i upload my video to? what file?

[usernamer]

i downloaded the mm player and it works, but it is very slow and it says that the size is to big and some thing is wrong with the sound. it still works tho, but i want to play this on a movie player which is way better, i would still like to know how to put this video file on the sony clie movie player so it looks better. help!

[sstrasser86]

no i think its a problem with the file...i have had this prob also. I havent figured out a way to play it yet either but i know its not a problem with the clie

[usernamer]

the file played fine on the clie when i put it in the image converter and did it, but it convered my 50 mb video clip to a 7mb so its like a part of it. lol i still need help putting the whole thing on my clie...

[euro nx73 user]

try this website, download the two links at the bottom that are:
audioplayer 3.1 (updated, with SonyMMUtilLib.prc) and Movieplayer 1.1
http://uk.geocities.com/mattyj2003@btinternet.com/
save the two to the same folder (create one) and then click on the two install files, and install them to directories, make sure you can remember where they are, and then put the audioplayer - palm application and SonyMMUtilLib - palm application and also the movieplayerEN - palm application files on the clie via hotsync, theoretically you should be able to play your MPEG file in Movieplayer, try putting it in the movie folder and renaming it etc. if it doesnt work straight off, and now you can play movies and music from a compact flash card aswell ;-)
again, i hope i was of assistance, Dan

[JMH]

Just a shot, but when you renamed the file and tried to open it, did you select MPEG format???

[usernamer]

try this website, download the two links at the bottom that are:
audioplayer 3.1 (updated, with SonyMMUtilLib.prc) and Movieplayer 1.1
http://uk.geocities.com/mattyj2003@btinternet.com/
save the two to the same folder (create one) and then click on the two install files, and install them to directories, make sure you can remember where they are, and then put the audioplayer - palm application and SonyMMUtilLib - palm application and also the movieplayerEN - palm application files on the clie via hotsync, theoretically you should be able to play your MPEG file in Movieplayer, try putting it in the movie folder and renaming it etc. if it doesnt work straight off, and now you can play movies and music from a compact flash card aswell ;-)
again, i hope i was of assistance, Dan
thx for the help but i already have a movie player and a audio player in my clie and on the movie player i can choose an mpeg file, or movie file. I still dont get how when i put it in the image converter it works, im so confused i spent 2 hours trying to figure this out and i think im about to quit. :(

[usernamer]

Just a shot, but when you renamed the file and tried to open it, did you select MPEG format???
i selected mpeg format and nothing popped up, i renamed it to. :(

[palmem]

Try taking a picture with the camera, and then putting the MPEG where the JPEG goes (dcim or something)

Try taking a movie with the camera, and putting the MPEG where the MOV goes (/MQROOT or something)

Rename it MOV000001.MPG or MOV000001.MPEG (try both, in both locations)

Select MPEG on the Movie Player

(Sorry for the long list, but I have done this once, and forgot which one worked for me...)

-palmem

[usernamer]

Try taking a picture with the camera, and then putting the MPEG where the JPEG goes (dcim or something)

Try taking a movie with the camera, and putting the MPEG where the MOV goes (/MQROOT or something)

Rename it MOV000001.MPG or MOV000001.MPEG (try both, in both locations)

Select MPEG on the Movie Player

(Sorry for the long list, but I have done this once, and forgot which one worked for me...)

-palmem
how to rename the mpg to mpeg i cant seem to do that... i think if i try naming it mpeg and i think it will work cause it has a mpeg player in my movie player.

[palmem]

Go to clie files or filez
Navagate to the file
Make it the only checked file
In clie files, click menu rename, type name, click ok
In filez, click details, type name, click save

-palmem

[cbulock]

If your trying to play the MPEG file directly, not only does it need to be named MOV00001.MPG, but it needs to go in the /MSSONY/MOML0001/ folder. That folder probably doesn't exists, so you would need to create it.
/MQ_ROOT/100MQV01/ will only work for MQV format files.

[usernamer]

If your trying to play the MPEG file directly, not only does it need to be named MOV00001.MPG, but it needs to go in the /MSSONY/MOML0001/ folder. That folder probably doesn't exists, so you would need to create it.
/MQ_ROOT/100MQV01/ will only work for MQV format files.
ohh i think this will work, finally some one smart helps me after 11 days :p

[kaleph]

Originally Posted by cbulock
If your trying to play the MPEG file directly, not only does it need to be named MOV00001.MPG, but it needs to go in the /MSSONY/MOML0001/ folder. That folder probably doesn't exists, so you would need to create it.
/MQ_ROOT/100MQV01/ will only work for MQV format files.

OK, where do you make this file. Under the "Palm" folder, the "Launcher" Folder, under the "palm/programs" file. Which one exactly?

[cbulock]

Those folders go on the root of the card

[Kaleph]

That did not work. I still cannot pull up the mpeg file on Movie Player version 1.1. Does it matter that 1. The file is on the memory stick and not the handheld 2. I have a Sony Clie NX80V and 3. Movie Player version 1.1 is on the memory stick and not the handheld