Zlauncher crashes NX80

[joemit]

I'm sure it's something I've done wrong but I just tried installing Zlauncher onto my NX80V and it crashes immediately, offers a reset button, which doesn't work, and when I use the Clie reset button I get stuck at the first screen and get the error message;

MemoryMgr.c,Line:3564

NULL handle

..... RESET

I installed Zlauncher 4.1 to the Clie internal RAM. Everything was working fine until I installed Zlauncher and once I deleted it by using File Manager it all works fine again. Any ideas what might be causing this?

Joe

[joemit]

I'm sure it's something I've done wrong but I just tried installing Zlauncher onto my NX80V and it crashes immediately, offers a reset button, which doesn't work, and when I use the Clie reset button I get stuck at the first screen and get the error message;

MemoryMgr.c,Line:3564

NULL handle

..... RESET

I installed Zlauncher 4.1 to the Clie internal RAM. Everything was working fine until I installed Zlauncher and once I deleted it by using File Manager it all works fine again. Any ideas what might be causing this?

Joe

I should just add that I deleted ZL from the NX80V, re-installed several times, always with the same result. ZL just doesn't seem to like my NX80V for some reason!

[josephgreco]

I got the same thing. Oh well, fuggit. I am apparently in the minority but I like Clie Launcher + SkinLauncher just fine.

[sebring]

Hmmm, the only time ZLauncher crashes my NX80 is when I try to launch DAMemopad with it. DAMemopad works fine using other DA Launchers and ZLauncher launches my other DAs without any problems. Any other time ZLauncher works flawlessly.

[sein]

Could it be that you're using a Theme not made for SONY_HR? It crashes when I try to use any other theme not specified for SONY.

[joemit]

Could it be that you're using a Theme not made for SONY_HR? It crashes when I try to use any other theme not specified for SONY.

Hi Sein,

I installed ZL and ZLT_AquawoodXP_SonyHR_64K.prc to internal RAM. I don't get the opportunity to try anything, the NX80V crashes as soon as I turn it on.

Thanks, Joe

[rhinoman]

I rarely have a problem with zlauncher on my nx80. However, if my internal memory, (or external memory- if zlauncher is on the ms via powerrun), is less than 1 mb, I sometimes crash.


rhinoman

[joemit]

I rarely have a problem with zlauncher on my nx80. However, if my internal memory, (or external memory- if zlauncher is on the ms via powerrun), is less than 1 mb, I sometimes crash.


rhinoman

Currently I've got 4.3Mb available.

Joe

[bohica]

I suggest downloading another theme (with background images). Zlauncher is an excellent program - but it's very picky if you choose an incompatible theme or one that is corrupt.

[joemit]

Thanks bohica, I'll try downloading a different theme as you suggested. I also tried installing ZLManager and used it to remove all traces of ZL, including the preference file, re-installed ZL, crashed immediately. I even downloaded a fresh copy of ZL, just in case.

I'll try another theme and see what happens, although I'm rapidly getting to the point where I'm not sure it's worth it.

BTW, I have MegaLauncher 4.3 installed but I presume this shouldn't matter and that they can happily co-exist?

Thanks, Joe

[bohica]

Hi Joe - I'm not 100% on this, but assuming MegaLauncher and ZLauncher will be both attempting to execute to reskin the OS there may be a possible conflict.

One way to be sure you've removed Zlauncher completely is to use Uninstall Manager at www.northglide.com.

Good luck,

Mark.

[joemit]

Hi Mark,

Sounds worth a try, I'll follow the link.

Thanks, Joe

[palmem]

ZLauncher used to crash my machine, but I backed it up, hard-reset, and everything was fine

I find that this solves a lot of my peoblems, not sure why, but it seems to...

Also, do you have MCA, because I noticed that MCA and Zlauncher crashed mine a bit more, until the hard-reset thingy

-Palmem

[joemit]

Hi Palmem,

I think I'm at the point where a hard reset may be my only option, very frustrating.

Thanks to everyone for your help and suggestions.

Joe

[joemit]

Just to let you guys know that I gave in last night and performed a hard reset. ZLauncher is now working fine. I've no idea what the problem was but thanks again for all your input and suggestions.

Joe