NZ-90 & POSE

[dre_mer]

Have any of you NZ-90 users been able to use POSE (Palm OS Emulator)? And if so how does one go about doing it? The software provided by www.palmos.com does not include a ROM image of my NZ-90 CLie.

[CliePet]

Sorry not possible.
Palm OS 5.x and later devices (ARM) can not be emulated using POSE.

There is a "Simulator" that will emulate the 68K parts and fake the ARM parts.
http://www.palmos.com/dev/tools/simulator
It provides general Palm OS 5 features - not NZ90 specifics.

You don't need to provide a ROM image, the simulator comes with a fake image.
And before you ask, no you can't use your NZ90 ROM image. For NZ90 specifics the only option is to test on the device itself.

[dre_mer]

Thanks for your response....that is exactly wanted I wanted to know!

[Lunitarie]

Hey there, I have an issue with an NZ90 I'm fixing- neither bluetooth nor IR works for data transfer, however the IR works as ClieRMC works....

This to me suggests a software problem located in the Flash ROM (as a hard reset does nothing). Maybe some kinda data transfer driver corruption or something...(?)

I've searched all over the net, and Cliesou...sorry.. 1src.com ( :) ) - I thought it may be a plan if I could put original NZ90 Palm OS5 files back into the Flash ROM from a ROM image. My NZ90 works fine, so maybe I could use this as a source...? Any ideas as to how I could do this would be very very very gratefully accepted

thankyou very much