MAC/CLIE-ip photo,i tunes

[Simplyclied]

OK,
I'm running OSX with the missing sync and trying desperately to marry it to my NR70U running with a 64MB memory stick. What's the secret to seeing my i photos and listening to my i tunes.?

[JohnJ80]

You need to run MSImport (probably for yours). This mounts the MS just like its a camera. You should have no problem.

Make sure you download the new version posted today - v3.0.5 from the markspace website.

j

[Alchemy]

Did you get it working? If so, how?

[tnA]

Mounting MS is always the problem for me, and many others. If someone knows how to do it flawlessly, please describe HOW step-by-step.

[JohnJ80]

Carefully read the directions in the provided manual.

For iPhoto:
1. put NZ90 in cradle with attached usb cable.
2. run MSImport on PDA.
3. MS will show up on your desktop under 'Computer' (top most OSX finder menu) mounted as a disk as the name of the card as you named it on your PDA>
4. Run iPhoto (if you don't have it start automatically) and import photos as you would otherwise.

For iTunes:
1. Put PDA in cradle connected with USB cable as above.
2. Run, on PDA, audioplayer.
3. Start iTunes
4. Under menus (I think) select 'Transfer'. This will mount the PDA on your desktop as above.
5. NZ90 will now show up in your listing of libraries and playlists as 'Clie'. Simply drag the titles of songs over to the Clie label and drop them there. They will then be downloaded.

For photos, if you have a DCIM (close to that for a name) on your memory stick, you need to rename it or delete it.

All of this is in the readme file and in the manual. Read both carefully and then follow the step by step exactly and it will work just fine.

I have made this run successfully with both the USB cradle - it should also work just fine with Blue tooth too.

My set up is a PB G3 bronze, 500Mhz with OS 10.2.4 and the proper palmos desktop and missing sync 3.0.5.

FYI, i believe their are differences from the BETA 3.0.5b4 rev and the FINAL 3.0.5b4 posted rev. Download the final version again and reinstall. I was unable to get BETA 3.0.5b4 to work but he FINAL worked fine.

j