Hnadstory on NX70V

[goyanian]

I am using a NX70V, but when I use Handstory to replace my memo, i found that the program only read from the CF rather than my MS. Where to set this?

Thanks

[n2ifp]

Hmm, it should automatically scan the MS. In main preferences make sure "Enable List Auto Update" is checked.

[*YellowRose*]

Originally posted by goyanian
I am using a NX70V, but when I use Handstory to replace my memo, i found that the program only read from the CF rather than my MS. Where to set this?

Thanks I'd love to get mine to read from my CF....what settings do I need to change to implement this???

[rhart00]

CF what?

[goyanian]

The handstory cannot recognise the CF card, but it scans the CF instead of the MS, nothing to set, it is all on default setting. The "Enable List Auto Update" option is on by default.

Goyanian

[ballistic]

Don't put a CF memory card in the NX's slot. The only card currently supported is the WLAN card by Sony.

[n2ifp]

This is not making any sense to me, are you trying to use a CF card?

[goyanian]

Sorry about my poor English. I am not trying to use the CF card at all. But just that th Handstory would not recognise the MS card and I cannot access the MS card from the Handstory at all. Every time it just says "CF card Device error".

[ballistic]

Which NX model # do you have? Which version of Handstory are you trying to run?

Did you try re-installing and doing a soft reset?

[n2ifp]

The latest version of HandStory should be v2.3
Do the steps as Ballistic says

If you still have a problem, then re-install Handstory only(no other apps) after a hard reset(this will erase all your data). If after all that and it still doesn't work, then maybe your Clie is defective.

[goyanian]

thanks for the advices!!!