PDA

View Full Version : Help? Something missing?

doctrbob
02-19-2003, 04:27 AM
Hi,
Proud owner of an NX70V. Installed and connected to my linksys router first try with the WL100 and using Netfront. Had to do a hard reset for other reasons (I'm a download junkie/tweaker ;) , but now can't seem to get the WL100 to work anymore. When I try to set my 'network' preferences, wireless lan isn't even a choice; only choice I have is 'untitled' and modem or IR or cradle configurations. Have reset, loaded and unloaded netfront and the WL100's programs (drivers?) and tried everything I can think of. Any ideas why I can't see the card anymore? Any help would be greatly appreciated. Have searched the forums but to no avail. Great forum, btw.
Thanks,
bob
Mun
02-19-2003, 05:48 AM
Have you try "HARD reset"?
Hold the power on button down and press the reset button at the back of the unit.
n2ifp
02-19-2003, 06:40 AM
Originally posted by doctrbob
Hi,
Proud owner of an NX70V. Installed and connected to my linksys router first try with the WL100 and using Netfront. Had to do a hard reset for other reasons (I'm a download junkie/tweaker ;) , but now can't seem to get the WL100 to work anymore. When I try to set my 'network' preferences, wireless lan isn't even a choice; only choice I have is 'untitled' and modem or IR or cradle configurations. Have reset, loaded and unloaded netfront and the WL100's programs (drivers?) and tried everything I can think of. Any ideas why I can't see the card anymore? Any help would be greatly appreciated. Have searched the forums but to no avail. Great forum, btw.
Thanks,
bob

Next hard reset, just load on the WL100 driver, nothing else, a HotSync may remove the driver. Put your WL100 in it's slot and see if you get the wireless option now, before even thinking about installing NetFront. The whole idea is to eliminate the possibility of other softwares from interfering.
Mun
02-19-2003, 07:42 AM
Oops forgot to tell you;
you need to run "Pref" from your launcher.
Select "Network" from the top righthand corner
Than select "Service" to "Wireless LAN" (note you may have to scroll down to select "Wireless LAN")

Hope it helps.