UX-50 e T68i Bluetooth connection HELP MEEE??

[rmeira]

Hy guys!!..
i just got a SonyEricsson T68i phone....
and .. i have a ux-50.. i tried to connect to the net with the GPRS vua bluetooth.... but it just kept saying "dialing".... and .. no go ;-(
then .. i tried.. with THE SAME config.. just changed the mode of the phone to IR, and so on the UX..
and IT WORKED ...
any tricks to connect to the Phone ??? i think i remember reading some voddo procedures around here.. like sync the phone to the UX, or the UX to the phone first, then do 3 resets, put it facing west and then waid 17 seconds ;-)))???
ANY IDEA???
tnks
Rodrigo Meira

[Unregistered]

comare the init strings on your ir and bluetooth connections. btw, are you using the preconfigured "Sony BT to GSM" connection? i found that it didn't work for me. i created my own BT to T68i connection and specified my own init string.

[rmeira]

same strings....
i created my own .. wich string u used ???
tnks
Rodrigo Meira

[gisolury]

I got similar problem
but mine is "incomplete network setting......."

[gisolury]

rmeira

I tried to connect via infrared but the "incomplete network setting" still appears

can u figure out ur setup?

[Edoras]

Try this to set yr Bluetooth Init string...

X1E0+CMEE=1+CSCS="GSM"+CNMI=3,1,2,0,0

or se this uRL

http://www.palminfocenter.com/view_story.asp?ID=3170&curpage=2

[gisolury]

Yes!!
It is not the bluetooth nor infrared problem

My provider phone me today and said if I can't connect, try to fill out the password and username. It works.

I don't use any init string

[Edoras]

Thanks for shring your problem!
Have fun surfing via UX50!

[Cliepro]

USE THE SONY MOBLIE CONNECTION WIZARD IT WORKS


http://ciscdb.sel.sony.com/cgi-bin/swu-install.pl?upd_id=1297&PASSVAL2=SMB


Cliepro

[crazy_smeggie]

Originally posted by Cliepro
USE THE SONY MOBLIE CONNECTION WIZARD IT WORKS


http://ciscdb.sel.sony.com/cgi-bin/swu-install.pl?upd_id=1297&PASSVAL2=SMB


Cliepro

Yes, get the Connection Wizard. It works so well sometimes that I can't get rid of it!!

Try it - it works!!


SMEGGIE:)

[rmeira]

i´ll give it a try.. then talk to you guys ;-))...
tnks
Rodrigo Meira

[rmeira]

Well well well .. i tried the connection manager...
it worked in some points......
i successfully got to connect (dial and stuff) via the Bluetooth ..(that´s an improvement...
but... when it connected.. the phone said "wrong APN" or something like that...
ANY IDEAS ON WHAT´S WRONG????
i´m almost there ;-))))
tnks for any help
Rodrigo Meira

[crazy_smeggie]

Maybe...

go to: Preferences/Network/Mobile Manager and at the bottom where it says Phone, and you will see something like *99***10#. Try changing the 10 to a 1- then try it. If that doesn't work, try 2, then 3, then 4 all the way up to 10, which is where mine is set.


SMEGGIE:D

[gisolury]

Thank You everyone.

Yesterday, my provider phoned me and said I could tried to use a set of username and password. And amazing, it works^^

He said that he read this from the threads. This shows the capacity of online community.

Merry Christmas