1src Forums - HELP: Graffiti Area "Virtually Dissapearing"

View Full Version : HELP: Graffiti Area "Virtually Dissapearing"

gusanitoverde

10-09-2003, 07:36 PM

Has it happened to you that the Virtual Graffiti does not appear anywhere in the Clie? I am having trouble with that. then you click in the home icon and just the icon appears, but all the rest is white. Is this a program corruption? Anyone else suffering from this?

By the way, I have a suspicion that "Bug Me" has to do with this corruption...

Anyone?

Unregistered

10-09-2003, 08:06 PM

I too have had this problem.
Has anyone else had the problem of the graffiti area disappearing? I can touch the area where it should be and it reappears. The silkscreen sometimes appears twice-top & bottom of screen. I'm not running any hacks. However, I'm using wondersilk and can't live without it. Any help would be greatly appreciated!

Newbe,
Wayne

Grey

10-09-2003, 08:16 PM

For me it's when I run an old app, something that kicks the colour depth down a notch but does it ugly. Soft reset fixes it, I just blow that app away and try to find a fully compatible one.

Just to make sure it's not the obvious: You aren't just accidentally scrolling it off using the little arrow in the bottom right corner right?

Unregistered

10-09-2003, 09:42 PM

Thanks for your suggestion.
I just realized the problem started when I updated my EroWare diver for my compact flash. I can't do without that either. The circle goes on and on. Oh, well.

Newbie Wayne

ricleo

10-10-2003, 12:16 AM

Actually, do any of you guys having this "disappearing VG" problem happen to be using the HiRes+ version of the OliveTree bible reader software? That's the cause of the disappearing VG and status bar problem.... happens to me immediately after I use programs after using the bible reader... usually solved by doing a soft reset, but problem reappears when bible reader is activated.

gusanitoverde

10-10-2003, 01:41 AM

Too many programs creating the fault... It saounds to me that it is a Clie VG problem...

ricleo

10-10-2003, 01:48 AM

Nah, it's very specific for me, only with the olive tree bible reader. It's a known problem with the Sony VG among a couple of friends of mine who either use the Nx80 or the NX70, which we have isolated to the olivetree program.

Try it, if you're using the olive tree reader, uninstall it, or do not activate it at all for a few days... you will find that the disappearing VG prob won't appear at all.

gusanitoverde

10-10-2003, 02:32 AM

Got it... Now that i think of it, I do have Bible Reader, and also, it used previous Palms I had. Thanks

Rick 098

10-10-2003, 04:35 PM

Originally posted by ricleo
Actually, do any of you guys having this "disappearing VG" problem happen to be using the HiRes+ version of the OliveTree bible reader software? That's the cause of the disappearing VG and status bar problem.... happens to me immediately after I use programs after using the bible reader... usually solved by doing a soft reset, but problem reappears when bible reader is activated.

Thanks!

Now I know to do a soft reset after using bible reader.

Unregistered

10-12-2003, 08:17 PM

or you could try AVOIDING the bible...

Grey

10-12-2003, 08:21 PM

Humour me for a minute and clarify what the 'VG' is?

BTW, Did any of the other thread contributers just get told about Unregistered's post, but in french? I think ClieSource might be getting a triffle muddled. :D

Grey

10-12-2003, 08:22 PM

Ah, forget that, VG is Virtual Grafitti - brain must have been off

ricleo

10-13-2003, 06:11 AM

Originally posted by Unregistered
or you could try AVOIDING the bible...

I'll never avoid the bible just to avoid a soft reset :D

aussie_nx70v

10-13-2003, 09:34 AM

I have a very similar problem which has only just been occuring.

Please see this thread:

http://www.cliesource.com/forums/showthread.php?threadid=29615

Unregistered

10-29-2003, 11:12 PM

Thanks to all of you who have replied to my query about the disappearing silkscreen, AKA "VG".

After reading the posts I jumped off the net and tried Olive Tree and sure enough. My silkscreen went goofy! I reset and duplicated what I had done, only with out activating the Olive Tree Bible Reader, NO problem.

Thanks!

The Bible is the greatest source of knowledge that exists so why would I quit reading it? If you are going to reply to this and haven't read the Bible...don't bother! If you don't know Jesus Christ as your personal Savior than the things of the Spirit are only confusing to you. I know that you won't understand this but it is true. I know because I was there before I came to know Christ. Like many people I set out to prove the Bible wrong and couldn't't. Josh McDowell has some great literature on trying to prove the Bible wrong.

I pray God's blessings on all of you!
PS-I have been a Christian since 1964

ricleo

10-30-2003, 06:13 AM

Wow....Christian since 1964! I wasn't even born then! :D God Bless you too!

Unregistered

10-30-2003, 05:05 PM

Hello Wayne,

Please save the attached file to the Desktop of the desktop computer. Then on the Clie delete the BibleR+ and BibleR+Opt files that you presently have installed.

Now load the new file into the Palm Install Tool and do a normal hotsync to the main memory of the Clie. Open BibleR+ on the Clie and go to Tree>Options>Preferences>Display. There you will see a box to enable silk screen. This will let you use the 320 x 450 display in the BibleReader. But I suggest that you disable it before you leave the application and then you should not find a problem with the other icons in different applications. BibleReader is not functioning 100% with the 320 x 450 display and this is a temporary workaround.

See attached.

Sincerely,

Kim Anderson
kim@olivetree.com

I just recieved this from... well you can see who it's from. Hope this helps everyone. You can probably find this on the Olive Tree site. The attached file is: BibleR350d291.prc

Newbie Wayne Cowan