Clié display vs T3 display

[Unregistered]

Is there anyone here who actually put the two same kind of devices side by side and checked the display performance? Brightness, resolution, speed etc...?

Please transmit every experience ever had. Thanks.

Zobo

[ricleo]

I did a comparison of the T3 and NX80 with picture comparisons of the actual units side by side with screens compared as well...

http://www.cliesource.com/forums/showthread.php?s=&threadid=28785

[KenSong]

I can say that the T3 screen is warmer with a slight yellow tinge compared to my NZ. The NZ is known to have a bluish tinge so putting the 2 side by side gave me the shivers thinking how far apart the colours are between these 2.

In terms of brightness, the NZ wins hands down with a 60% setting equivalent to the T3's 100%. This need not be a disadvantage as I find the NZ's lowest setting to be still too bright for night viewing while the lowest setting for the T3 is just right. I never set any device past 50% mark anyways in normal use.

The screen size is the same while the T3s lighting seems more even as the NZ is also known to have some ripples at the bottom edge. In terms of resolution, I perceive no difference. Speed is subjective as the 400 mHz T3 naturally redraws much faster.

[tonyreynolds]

From preliminary reviews, it looks like my NZ will run roughly twice as long as the T3 on a full battery charge: 3 hours versus 6 hours and 50 minutes...

Tony