PDA

View Full Version : New CF modems candidates

pelaca
02-04-2003, 08:22 AM
New posibles candidates

SiteCom CF-0001 (http://www.sitecom.com/)

Trellis CF56K (http://www.trellis.com.br/index2.htm)

Dikom CF56R (http://www.hotline-int.ch/hotline/english/firstpage.html)

Dynalink 1456CF (http://www.dynalink.com/english/products/1456CF.html)

Anybody has one of this?
pelaca
02-04-2003, 08:47 AM
Anybody with the Ambicom or Kaga Electronics (TAXAN) can report me the ATI0 to ATI6 respose commands?
The easy way of take this is with a notebook and a PCMCIA to CF adapter...
Thanks in advance...
eone
02-04-2003, 10:19 AM
Hi Pelaca,

How to use those CF modem? Do I need to install any driver?
ojleblanc
02-04-2003, 10:23 AM
See this thread for instructions...

http://www.cliesource.com/forums/showthread.php?s=&threadid=83
fnm
02-04-2003, 12:59 PM
Pelaca,

I am using the Ambicom and is working fine, but I do not know how to obtain the ATI0 to ATI6 respose commands. Can you give me some pointers?

Thanks.
LeggNet
02-04-2003, 01:25 PM
Ambicom Modem Info (using CF/PCMCIA adaptor):

ATI0 56000
ATI6 RCV56DPF-PLL L8571A Rev 39.00/39.00

OTHER COMMANDS:

ATQ0V1E0 - OK
AT+GMM - +GMM: V90
AT+FCLASS=? - 0,1,1.0,2,8
AT#CLS=? - COMMAND NOT SUPPORTED
AT+GCI? - +GCI: B5
AT+GCI=? - +GCI: (B5)
ATI1 - 255
ATI2 - OK
ATI3 - V3.405-V90_2M_DLL
ATI4 - a007880284C6002F
bC60000000
r1005111151012004
r3000111170000000
ATI5 - B5
ATI6 - RCV56DPF-PLL L8571A Rev 39.00/39.00
ATI7 - OK
ATQ0V1E0 - OK
AT+GMM - +GMM: V90
AT+FCLASS=? - 0,1,1.0,2,8
AT#CLS=? - COMMAND NOT SUPPORTED
AT+GCI? - +GCI: B5
AT+GCI=? - +GCI: (B5)
ATI1 - 255
ATI2 - OK
ATI3 - V3.405-V90_2M_DLL
ATI4 - a007880284C6002F
bC60000000
r1005111151012004
r3000111170000000
ATI5 - B5
ATI6 - RCV56DPF-PLL L8571A Rev 39.00/39.00
ATI7 - OK

Hope this is helpful.....

Rich
jpattigr
02-04-2003, 09:57 PM
I purchased this modem off e-Bay as it was a Billington Modem in the picture of the auction. I received this Dikom CF 56R-NF modem, It works fine with my NX 70V.
However I can not connect to my ISP as they require the line of Domain. I tried username@domain in the username line but still no luck.
Any suggestions would be welcome.
eone
02-04-2003, 11:43 PM
Can I just install the english version and skip the japanese version?
pelaca
02-05-2003, 03:14 AM
Originally posted by eone
Can I just install the english version and skip the japanese version?

Yes...
You have to install the files CFNULLinf.prc, CFmodeminf.prc, CFmodemvdrv.prc and CFutilityen.prc...
pelaca
02-05-2003, 03:29 AM
Originally posted by jpattigr
I purchased this modem off e-Bay as it was a Billington Modem in the picture of the auction. I received this Dikom CF 56R-NF modem, It works fine with my NX 70V.
However I can not connect to my ISP as they require the line of Domain. I tried username@domain in the username line but still no luck.
Any suggestions would be welcome.

Good news... can you tell me whats reports the CFutility on the Brand and Model?
pelaca
02-05-2003, 10:11 AM
Rich,
thanks for the codes...

can you execute te comands,

AT+FMFR?

and

AT+FMDL?
clieZilla2
02-05-2003, 10:25 AM
where's the cheapest place to get the ambicom?
clieZilla2
02-05-2003, 10:28 AM
is this the one?

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3004753892&category=3728
LeggNet
02-05-2003, 11:27 AM
Originally posted by pelaca
Rich,
thanks for the codes...

can you execute te comands,

AT+FMFR?

and

AT+FMDL?

AT+FMFR? CONEXANT

AT+FMDL? V90


again, hope this is helpful...

Rich
LeggNet
02-05-2003, 11:28 AM
Originally posted by clieZilla2
is this the one?

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3004753892&category=3728
That's it... bid away!

Cheers, Rich
pelaca
02-05-2003, 11:52 AM
Originally posted by LeggNet


AT+FMFR? CONEXANT

AT+FMDL? V90


again, hope this is helpful...

Rich

Yes, Thanks...
I'm looking for the ways to check if the modem work before buy it...