PDA

View Full Version : USB Hotsync Cable. Does it work on the new NX73V?

Shadamehr
08-22-2003, 06:09 AM
Hi there!

I ordered the NX73V from an online shop, which unfortunately has not arrived yet. But I was wondering about the following: for my T675C I have an USB Hotsync cable to connect to my notebook, with which I can Hotsync and recharge the T675C. Are the connectors of the T675C and NX73V identical? I.e. will the Hotsync cable work with the new NX73V?

Thanks for your help!
n2ifp
08-22-2003, 06:14 AM
It's only the "N" series where it's not compatible.

The USB/recharge cable works well on the NX80!!!
Shadamehr
08-22-2003, 06:17 AM
Sounds excellent. So no additional costs there!!!

And by the way, are the display sizes the same of both models? As I would like to use the screen protectors of the T675C for the NX73V.
n2ifp
08-22-2003, 06:38 AM
Originally posted by Shadamehr
Sounds excellent. So no additional costs there!!!

And by the way, are the display sizes the same of both models? As I would like to use the screen protectors of the T675C for the NX73V.

No, I am afraid not, the NX has the 320x480 screen, so it's a bit longer, but much nicer!
Shadamehr
08-22-2003, 06:41 AM
Well, but this screen protector goes all the way down to the bottom line below the writing area....
JwY
08-22-2003, 11:40 AM
well it doesnt fit i'm sure
cause the t665 with the graffiti part is still short than the nx

the nx screen is 50% longer than the t665
and if u look at it the writing area isnt 50% of the screen on the t665