NX = different connector?

[Donkeystyle]

If the NX really has different connector wirings and that prohibits a timely keyboard release, why do the same GPS connectors work on NR, NX, and T series?

[n2ifp]

Originally posted by Donkeystyle
If the NX really has different connector wirings and that prohibits a timely keyboard release, why do the same GPS connectors work on NR, NX, and T series?

From my understanding, the connectors are the same. One of the pins has an altered logic state, that would need a pull-up resistor to make it functional on the NX. Keep in mind, I have heard this from others, but personally haven't seen this with my own two eyes. The pin outs and schematic still look identical to me.

[Donkeystyle]

oh, thanks for the info. So likely the GPS unit simply doesnt use the altered logic state pin. Makes sense.

[n2ifp]

Originally posted by Donkeystyle
oh, thanks for the info. So likely the GPS unit simply doesnt use the altered logic state pin. Makes sense.

Here is a PDF schematic of a serial converter, but shows the Clie pin outs.

http://leggnet.com/clie/Ifcndke3.pdf