CF Driver 1.2.0 freezes my NX70

[woofran]

Let me get to the point.


Version 1.2.0 Driver
NX70V/U

It freezes right after I launch CF Utility (from Eruware)
Can't click anything.....
Been using version 1.2.0 ever since it came out with no big prob
The problem started happening last night


I am wondering if a hard reset is the only solution since I can't even remove the driver and reinstall it



Any help would be appreciated

[fireman54]

Possibly, if you do a warm reset. This means holding the up button while doing a reset from the reset hole. Make sure you hold the up button until the preferences screen shows. Since the virtual graffiti area willbe blank, you can tap your stylus where the Launch button should be. Use a file manager app like McFile, Filez, or maybe Cliefiles and delete the utility and the driver. Do a normal reset afterwards. Hopefully, this will work. Good luck.

[woofran]

Thanx so much fireman :-)

Seems I found the problem myself -.-a

It was CodeDiver. I had set up CodeDiver with macro function to automatically mount CF.

The thing is... after soft reset, if CF is not present or unplugged.. it freezes when I launch CF Utility.

Dunno why...


Anyway, I saved a Hard boot.