Bluetooth between aSony Nz-90 and a P-800

[Unregistered]

I have the Sony NZ-90 and now a Sony P-800 with bluetooth.

I have not tried but in the connections on the NZ-90 list
there is no P-800 listed as the P-800 is newer?????

[colombo]

Just pair the two units and treat the P800 as a modem connecting through Bluetooth. I'm not sure of the logic of connecting a P800 (camera-organiser) to a NZ90 (camera-organiser) is, but there should be no problems.

[pstoppani]

I have the NZ and P800, and Bluetooth connections work just fine. As the previous poster noted, you treat the P800 as a BT modem; just create a new connection for it and then use it in an existing or new Network configuration.

I haven't tried it, but you should also be able to send items between them via BT.

[CCCCCC]

i have not find p800 installer on nz90

[CCCCCC]

sorry,driver

[LiquidSnake]

Search function is a wondefull think ;)
Here is my reply :
wilfredt: You are paired your P800 and NZ (I Assume its ok)
Call your sp about your gprs settings and phone no to dial gprs : But usually its like : *99***1#
NZ To P800 my settings (After pairing the both devices)
NZ: Under connection menu : make a new connection(Example : my p800 or custom )
Connection : Custom(My connection name)
Connect to : Modem
Via : Bluetooth
Device : P800 (Or whatever your phones pairing name on the NZ s trusted devices list)
Dialing: Touch tone
Volume : Low
Details : Speed 57.600(Test it with 57600 first if its ok then try the115 200 setting..)
FlowCtl: Automatic
InitString : blank...

NZ under Network menu :
Make a new Network conn.
Service : Your sp name or whatever you choose
User name : Your access name (mine is gprs by default from Turkcell)
Password : Your password(Again mine is gprs its default settings from my sp)
Connetion:Custom (My connection name)
Details :
Connection type : ppp
Idle timeout : 1 minute
Query DNS box: Checked
IP Address box : Checked (Automatic)

Script : End

Btw: If your P800 access the web/mail via its built in browser or Opera browser then these settings will work on your p800 but please check your APN name under your P800 settings/control panel %90 of the sp use : internet instead of wap words under their settings parameters
Hope this helps!