PDA

View Full Version : NX70V Web Browseing

S.W.News
03-18-2008, 05:00 PM
I Have A NX70V And I Like Web Browsing The Web Is Any Way To Have Active - x And/Or YouTube ?
intellidryad
03-18-2008, 08:40 PM
Active X : no. (anything not microsoft can't support it)
Youtube: I've heard Kinoma can do it, but not sure if it supports older Clies like the NX70v. Also, Kinoma is very expensive.
S.W.News
04-10-2008, 02:43 PM
I Can's Seem To Get Web Pro To Work It Says You Are Not Autherized To Run This
mmulhern
04-10-2008, 04:46 PM
What version of WebPro are you trying to run? I'm currently using v3.5 without any problems.
ericrc
03-25-2009, 08:50 PM
What version of WebPro are you trying to run? I'm currently using v3.5 without any problems.

Hi,where did you get your webpro V3.5? I'm also trying to look for one which suits my NZ90
mmulhern
03-26-2009, 03:53 PM
I originally got it from http://jamerican.net/1src/WebPro/WebProV.PRC but that link is kaput.
ericrc
03-26-2009, 11:35 PM
Hi,mmulhern
Could you send your WebproV to me via email? ouli2823@hotmail.com Thanks
I've been trying to search one that works for my NZ90, but no luck
ericrc
03-27-2009, 02:50 AM
btw, are you running webpro 3.5 on your nx70?
mmulhern
03-28-2009, 12:49 AM
btw, are you running webpro 3.5 on your nx70?

Yes, and I'm looking for my clie downloads installer cd from my old PC.
ericrc
03-28-2009, 02:21 AM
Yes, and I'm looking for my clie downloads installer cd from my old PC.

Thank you for your help, i really appreciate it.
pls let me know when you have any progress on digging out the old software packge
thank you :D
mmulhern
03-29-2009, 04:26 PM
Hi, I've uploaded the WebPro 3.5 to my iDisk - have a look in http://public.me.com/jongleur under "Clie Stuff" along with the version on TCPMP I'm using for watching video, and also FAT32, and CF drivers.

Michael.
ericrc
03-29-2009, 10:00 PM
Hi, I've uploaded the WebPro 3.5 to my iDisk - have a look in http://public.me.com/jongleur under "Clie Stuff" along with the version on TCPMP I'm using for watching video, and also FAT32, and CF drivers.

Michael.

Thank you for your great help!! The webpro runs perfectly on my NZ90 now :)
BTW, how do I get the FAT32 driver to work? Do I just need to Hotsync it to my palm or do I have to do some other things to get it work?
Thanks
ericrc
03-29-2009, 11:41 PM
Hi,I've tried to install the FAT32 Driver on my NZ90, but it seems it doesn't work, one question, how do I change the CreatorID and the version of files ? I tried to use FileZ, Mcfile and rescoexplorer, and it seems none of these apps can make that happen.
ericrc
03-30-2009, 12:02 AM
Hi,it seems the driver works, I reformat my 4G CF card and 8G MS Duo Pro on my computer with FAT32 format, and put it back into my CLIE, I browse them with RescoExplorer, it displays the correct capacity of both cards. :D
mmulhern
03-30-2009, 04:02 PM
Glad to help.
ericrc
03-31-2009, 11:06 AM
Which Wifi card do you use on your NX70? I've tried Buffalo WLI-CF-S11G which was supported by Mini's patched driver according to his thread, but the card didn't work on my NZ90 even I had the patched driver installed, the NZ90 didn't recognize the card and it just gave a "device error message" when I press the "Connect" button. :(
I'm considering buying a Linksys WCF12 instead but I don't know whether it will work with my nz90 :confused:
mmulhern
03-31-2009, 03:52 PM
Hi, my card is a Microlight CFW100, (with FCC ID of Q5SWF18) and using Mini's patched Palm CF wifi driver.

As I'm decommissioning my 802.11b network at home, the card is available if you'd like to purchase (PM me).
ericrc
03-31-2009, 09:24 PM
Hi,
No,thanks. Since I'm not in Australia, I'll purchase the card locally in order to avoid the expensive shipping :)
Are you going to upgrade the wireless router at home to a 802.11G or 802.11N one? I think it is compatible with the old (802.11b) wireless card. So I think you can still use the CF wifi card along with the new router
mmulhern
04-01-2009, 04:59 AM
No, the main problem is that the card and Clie only support WEP, not WPA/2 even if I was to activate 802.11b support on the router.

Good luck getting your Clie and network talking to each other.
ericrc
04-01-2009, 09:51 PM
I got myself another Buffalo card which is a WLI2-CF-S11, it works on my NZ90 now...^^
I installed the WL110 driver instead of the one for both WL100/WL110, I renamed the WL110 driver and patched it with mini's tool and installed, the machine recognize the card immediately.
For the encryption, I have to switch my router from WPA/2--->WEP128 which seems more likely unsafe
ericrc
04-01-2009, 09:53 PM
I got myself another Buffalo card which is a WLI2-CF-S11, it works on my NZ90 now...^^
I installed the WL110 driver instead of the one for both WL100/WL110, I renamed the WL110 driver and patched it with mini's tool and installed, the machine recognize the card immediately.
For the encryption, I have to switch my router from WPA/2--->WEP128 which seems more likely to be unsafe...