Another Sony CLIE NX Parts & Repair shop

[DanT]

Some of you probably know me from TH55 forum, doing TH55 repairs and parts sale. Finally I get my feet wet with UX and NX series. We'll see how it goes. If any of you need some parts, PM me first and I'll see if I get them. Here are what I got so far.

http://www.1src.com/gallery/data/500/2949NX_parts.JPG

[dragonsgames]

WOAH! How much did all that cost...? ;)

[DanT]

As much as one NX73V, 3LCDs, 3NX73 cameras, would cost. ;)

[Joel]

I dug up my NX70V. Wow... it still feels great in my hands! :) The swiveling camera housing is all scratched up though. Would you have a "mint" camera housing?

Thanks for offering this service.

[guysoft]

do you have the nx80v's camera module?
i want to repair my current one

[LupeValenz]

-Wipes a tear from his eye- such memories ;_;

[DanT]

I dug up my NX70V. Wow... it still feels great in my hands! :) The swiveling camera housing is all scratched up though. Would you have a "mint" camera housing?

Thanks for offering this service.

:(

Sorry, Joel. I don't have one. I'll let you know when I get one.

[DanT]

do you have the nx80v's camera module?
i want to repair my current one

:(

Sorry, guysoft. I don't have one. I'll let you know when I get it.

[intellidryad]

OMG, such sweet memories. I just found out that my NX only "burns" 1gig MS cards (destroys the cards permanently), it likes my 2gig card, so I guess the slot was not busted after all :)

By the way, have you seen NX's that "think you pressed some button" when you turned the screen hinge? For example, launching an app which is associated to a button.

My greatest wish would be that I could upgrade the RAM size & OS version of my NX73 to that of the TH55 and make WIFI built-in, though, which doesn't seem possible...

[guysoft]

:(

Sorry, guysoft. I don't have one. I'll let you know when I get it.
please tell me if you do, i am searching for it.

I am else expecting this week a nx60 cf slot I wasn't to use the connector to try and repair my nx80. Mine was broken when i sent my clie to repair for the camera (ironicly).

[katana]

How much is the NX70V case??
how much would it cost to ship to Hong Kong??

[isrcge399]

Some of you probably know me from TH55 forum, doing TH55 repairs and parts sale. Finally I get my feet wet with UX and NX series. We'll see how it goes. If any of you need some parts, PM me first and I'll see if I get them. Here are what I got so far.

http://www.1src.com/gallery/data/500/2949NX_parts.JPG
HI! I'm interested on a LCD display for Sony Clie Pega-NR70V/u .The one I had went bad .Can you e-mail me with a quote if you can find one.
Thank you: Genci

[DanT]

...By the way, have you seen NX's that "think you pressed some button" when you turned the screen hinge? For example, launching an app which is associated to a button...

Fortunately not.

[DanT]

HI! I'm interested on a LCD display for Sony Clie Pega-NR70V/u .The one I had went bad .Can you e-mail me with a quote if you can find one.
Thank you: Genci

Sorry to hear that. I'm not sure if the NX LCD fits NR. Let me check and get back with you.

I do have plenty of NR bottom half (keyboard, camera, and swivel assembly). For some reasons they last longer than the LCD.

[DanT]

How much is the NX70V case??
how much would it cost to ship to Hong Kong??

:(

Sorry katana. I don't have one at the moment. I'll let you know when I get it.

[DanT]

Sorry to hear that. I'm not sure if the NX LCD fits NR. Let me check and get back with you.

I do have plenty of NR bottom half (keyboard, camera, and swivel assembly). For some reasons they last longer than the LCD.

I found one broken NR-70V with LCD in my NR piles, took the LCD out a test it. Unfortunately it was DOA and it is not the same as NX LCD. Oh well, back on the hunt of NR LCD.

[guysoft]

I have an nr70v with a broken screen, actually I think its ok, it works for about 1 sec when turned on, then disappears (i get white and black lines).

Have any idea what it could be?

[DanT]

My guess is the bad LCD connector in the motherboard side. I have about 20 NR70V motherboards, I can swap yours with mine and see if that fixes it.

[guysoft]

My guess is the bad LCD connector in the motherboard side. I have about 20 NR70V motherboards, I can swap yours with mine and see if that fixes it.

Well, at the moment I don't really have a reason to work on it, I have my own nx80v. I opened it about a month ago, but didn't see an obvious error.

Where is the screen connector located? is it at the back, or i need to go as far as where the keyboard is? is there a chance I missed it?
I took images of it uncased, I can have a look there, if you tell me where.

[DanT]

There are 4 connectors, 2 at the back of LCD and 2 at the bottom of the motherboard.

[guysoft]

Aren't the connectors on the motherboard are on the top? or at the futher back, where the keyboard is?

Sorry I didn't quite follow your last post :-S

[DanT]

If you open the back and look to the motherboard, they are underneath the motherboard facing the keyboard. They are on the other side of the camera connector.

[guysoft]

If you open the back and look to the motherboard, they are underneath the motherboard facing the keyboard. They are on the other side of the camera connector.
Ah, I was too scared to look down there, I'll try that once I get time.
I'll update here :-)

[deuce23]

Do you have a digitizer for the TJ37? If so, let me know how much.
Thanks

[guysoft]

BTW, an update: if you need a broken NR70V clie - i have one for you..

[DanT]

BTW, an update: if you need a broken NR70V clie - i have one for you..

I'm interested, but you're in Israel. Probably the shipping cost to USA may make it too expensive from me to buy it.

[DanT]

Do you have a digitizer for the TJ37? If so, let me know how much.
Thanks

Yes, I have one from TJ27 (CSK-001/U). It would be $25 + shipping.

[guysoft]

I'm interested, but you're in Israel. Probably the shipping cost to USA may make it too expensive from me to buy it.
Well I was planning to go to the post office to get a price list, so I can sell stuff on ebay, I'll can get you the price :-)

[davrodiver]

Guysoft,

The NX70V and the NR70V screens are the same. I used an R screen to fix my X Clie. Also,the NX73 and NX80 are the same, though not the same as the 70v's. As for the lines on the screen, i fixed a couple of those with a small piece of plastic. Another 1src user told me how. If you take the front bezel off the screen, there is a small gray bar at the top. If you put pressure on this bar, it might fix the picture. I was able to test this by putting pressure on the plastic cover at the top of the screen.

Hope this helps,
Dave

[Marvels]

How much for a NX70 screen to England? My son dropped my clie and now i have dreaded white lines :( . Hoping that a new screen would fix my beloved nx70v

[ARA]

hello all
i bought used clie-nx80v with a little problem with it's camera and i have opened it to resolved it (i wish i never did it) but after closing it it died! and not turend on! what i must do ?
what damaged ? may be i can repair it ?
please help me if you have any experience.
thanks a lot.

[guysoft]

hello all
i bought used clie-nx80v with a little problem with it's camera

I had that too. its super common! all they ebay auctions have no camera.


How much for a NX70 screen to England? My son dropped my clie and now i have dreaded white lines . Hoping that a new screen would fix my beloved nx70v

I have the same problem with my nr70. I was told above how to fix it, but I didn't try it yet.

[ARA]

Hello Dears ;
but my story is more dramatic! after opening and closing my clie it died and then never
turned on again!! what i can do for this ?

[guysoft]

Hello Dears ;
but my story is more dramatic! after opening and closing my clie it died and then never
turned on again!! what i can do for this ?
well, i gave mine to sony to repair the camera. and they broke its cf port. if sony broke it. then we have a better chance doing so.
you can try sending it to a proffesinal

[ARA]

dear guysoft ;
may be something like resseting the bios in PC's exist with clie ?
This is my history ;
I bought used "sony clie nx80v" and it has a little problem in camera (it was noisy). I decide to open and fix it and I foolishly (of course with care) opend it but
after opening back cover and seeing it (very complicated and I scared!) and close it again. Of course First of all disconnected the battery and one time (when cover removed) I connected battery and it powered on ; but after that it never turned on again. Wen I putting it on cardle it charging (orange light on) and after some hours orange light goes off. But by pressing power button it not turn on.
All story from buying and this event is only 2 days! And I am very sad! Can you know somebody to help me about what happened ? and may be I can fix it ? I am from IRAN and there is no service center for clie in my country.

thanks a lot for quick response

[guysoft]

dear guysoft ;
may be something like resseting the bios in PC's exist with clie ?
This is my history ;
I bought used "sony clie nx80v" and it has a little problem in camera (it was noisy). I decide to open and fix it and I foolishly (of course with care) opend it but
after opening back cover and seeing it (very complicated and I scared!) and close it again. Of course First of all disconnected the battery and one time (when cover removed) I connected battery and it powered on ; but after that it never turned on again. Wen I putting it on cardle it charging (orange light on) and after some hours orange light goes off. But by pressing power button it not turn on.
All story from buying and this event is only 2 days! And I am very sad! Can you know somebody to help me about what happened ? and may be I can fix it ? I am from IRAN and there is no service center for clie in my country.

thanks a lot for quick response

I know how you feel. I am in Israel and sony don't officially support clies here nether. They are in fact, a real pain when it comes to anything.

I can just tell you the obvious: make sure you didn't connect the battary the wrong way round, do a hard reset (press the reset button under the memory stick while holding the power button down), and hope it works.

Is there no some kind of life?

[ARA]

thanks a lot

[guysoft]

thanks a lot
Does that mean hard reset worked?
Or your just being polite? :-)

[ARA]

hello
it means nothing worked and confusing!
but would you note to this points : (may be you have or you heared common experince)

- I have checked power button and it function is ok. (also I have checked battery connector and I think it is ok too)

- About LED; it only comes up on only when putting it on cradle.

- when I opened it I disconnected battery and once I connect battery (when case is open) and it powered on but I disconnect battery again. And after that it never turned on again.


- if I understand it! I think problem is something like that; i.e. something like error in BIOS in PC's .

- battery voltage is never over 5 V (mostly ~4) ; (when battery disconnected); I don't know may it must be over 5 or (just 5.2) to power it up ?

- there is empty connector with ~5 pin on the corner of mainboard. May be that is something for flashing memory or resetting it ? (something like resetting BIOS).

- I also checked all boards accurately and I didn't find any physical damage in electronic elements.

- finally you know were is the nearest sony service center for repairing it ? where repairing it is easy and not too expensive ?

- sorry for two much questions!!

[ARA]

hello
it means nothing worked and i am confusing!
but would you note to this points : (may be you have or you heared common experince)

- I have checked power button and it function is ok. (also I have checked battery connector and I think it is ok too)

- About LED; it only comes up on only when putting it on cradle.

- when I opened it I disconnected battery and once I connect battery (when case is open) and it powered on but I disconnect battery again. And after that it never turned on again.


- if I understand it! I think problem is something like that; i.e. something like error in BIOS in PC's .

- battery voltage is never over 5 V (mostly ~4) ; (when battery disconnected); I don't know may it must be over 5 or (just 5.2) to power it up ?

- there is empty connector with ~5 pin on the corner of mainboard. May be that is something for flashing memory or resetting it ? (something like resetting BIOS).

- I also checked all boards accurately and I didn't find any physical damage in electronic elements.

- finally you know were is the nearest sony service center for repairing it ? where repairing it is easy and not too expensive ?

- sorry for too much questions!!

[guysoft]

hello
- I have checked power button and it function is ok. (also I have checked battery connector and I think it is ok too)


I just want to make sure - when i was talking about the power button i wasn't asking if it worked, I was talking about a 'hard reset'. Do you know what this is?

[ARA]

Hello;
yes i know that ; .. holding down power and then pressing reset .....
but nothing happend.

[DanT]

How much for a NX70 screen to England? My son dropped my clie and now i have dreaded white lines :( . Hoping that a new screen would fix my beloved nx70v

Sorry to hear about your broken LCD and late reply as I was out of town last week. Please check your email for my reply.

[archangel]

I need to replace the slide power switch on my NX80. I would love to find out if it is replaceable. The old one broke off and I haven't taken it apart to look.

[DanT]

That happens a lot. None of my NX80s has that slide power switch.

[michaelta]

dan, is there a way to replace the outer layer of the screen? there are scratches on it. let me know.

Michael

p.s. i will send the check out today or tomorrow for the batteries.

[DanT]

I looked at my spare LCD and unable to figure out how to separate the digitizer from the LCD from the NR, NX, and NZ series. They are glued tightly together. You may have to live with the scratches or replace the whole LCD assembly. Sorry.

[michaelta]

you can change the LCD? how much and how long will it take?

michael

[DanT]

I have one in stock. It'll take me a day + shipping to do it. It costs you $100 + shipping.

[michaelta]

i am going to finish my work here and send a bill out. as soon as i get paid, about a week. i will send you the money for the LCD & Batteries. i want to get this done asap. it is badly scratched. the nx70 is the one that needs the LCD. .... hope this is the one you have. i will send you a private message with my phone number so we can speak.

michael

[boomer]

I've got a sick NX70. I've had it since it was new - it's my baby, my precious. I'm going to be lost without it.

Everything has worked just fine, until this morning.
Out of the blue, the device suddenly is acting funny. The power button doesn't turn it off, it goes to back light off mode automatically, the scroll wheel doesn't respond to the push command... When I do a reset, it gets stuck. It will reset eventually, and then works fine for a while - but then it goes all bad again.

Any thoughts or ideas? I've never seriously dropped it, I did nothing different this morning.
Thanks!

Derrick

[unseen wombat]

ARA, I had the same problem with both my nx70v and nx73v. No one has been able to help me.

DanT, I sent you a private message.

[JimitheRttenKid]

Hi all, I was just browsing through the forums and saw this thread. DanT is very capable and also has been able to collect a good inventory to scavenge repair parts from, however, for any of you with repairs that you either do not want to attempt yourselves, or find too difficult, cannot get parts for, or that DanT has no parts/cannot fix, etc, you may want to consider trying this: One man company fixes PDAs (http://www.theinquirer.net/default.aspx?article=28522)

e-Bay store here (http://search.ebay.com/_W0QQsassZitsnothere)

I have not tried him, but from the article, describing the exact problem that I have with my NX - dead camera :(, I will probably give him a try. Looks like a pretty good alternative to the costly OEM support of Sony.

Post any results/experience you have if you try it.

Cheers!

[DanT]

I also mentioned Chris Short in this thread, Let's build "TH55 Spareparts Center" Here (http://www.1src.com/forums/showthread.php?t=83569&page=1).

[Wytnucls]

Hi Dan,
Just broke the screen on my NX80! Got any spare screen and how much, with postage to Europe?
If not, are you interested in buying it for parts?
Thanks,
Thierry

[DanT]

:(

Hi Thierry,
What a bummer. Sorry to hear that. I can do either. Check your PM for detail.
Take care,
Dan

[jmcniece]

I am looking for only the little slide power/hold button for a CLIE PEG-NX73VU. If you have one, please let me know the total price with shipping to zip: 33462. If you know elsewhere where I could get one - please let me know.

Help and Thanks,
Jeff

[DanT]

:(
That is a hard to get parts. I have 4 broken NX73V/U with missing power/hold button.

Sorry,
Dan

[guysoft]

I am looking for only the little slide power/hold button for a CLIE PEG-NX73VU. If you have one, please let me know the total price with shipping to zip: 33462. If you know elsewhere where I could get one - please let me know.

Help and Thanks,
Jeff
BTW, if you have two (well, for NX80V). Then I am also interested..

[davidl]

Do you have access to parts for the Sony UX180P. I was upgrading the harddrive with an iPod 60Gb and my meat fingers tore the flimsy ribbon cable. I've removed the cable which includes the USB assembly as one piece and am looking for the replacement part.

Cheers,

David

[DanT]

Sorry bud, I don't mess around with my UX180P. It is just way too expensive. You may want to check Sony.

[davidl]

Thanks for the reply DanT, I'm trying that route the problem is I'm in Canada and they never intro'd the product up here. I will fight the fight of wrestling parts out of Sony. BTW, the hard drive conversion is actually very straighforward.... except for my manhandling of the cable...
Thanks again.

[qianjizhao]

Hi
How much for NX70v lcd?
Thanks

[DanT]

Hi
How much for NX70v lcd?
Thanks

qianjizhao, I don't post price on the thread any more since the price will change with time, supply & demand. Please check your PM.

[tzeminghau]

i dropped my NR-70 the other day.. the screen became bad.. i can only see lines. but if i press the top part of the lcd screen, it can display well.
Can anyone educate me on how to check the connectivity of the lcd screen, and any suggestion on how to fix it is greatly appreciated.

[JoyceD]

My Clie is stuck on hold. Can anyone help? The button you were talking about is broken, but somehow it turned on "hold" and now I can't turn it off. If I reset and sync quickly before it turns to hold, I can sync it, but nothing else. I hope someone can help.

[mk_85175]

I also mentioned Chris Short in this thread, Let's build "TH55 Spareparts Center" Here (http://www.1src.com/forums/showthread.php?t=83569&page=1).

Hello,

I am a new user here. I have a NX70V/U; I dropped it few days ago and now I get Vertical lines on one side of the screen (no scratches). I was wondering if you have any idea how to fix this or get it fixed. I checked Sony's website and they are charging $149 to just have a look at the problem.

Thanks in advance,
-- MK

[qianjizhao]

go to ebay and get a cheap second hand Nx70v/nx60/NR70/NR60
they have same LCD screen

[mackrack5]

Hi Dan,
Camera for NX-80 if any available.

[DanT]

Hello,

I am a new user here. I have a NX70V/U; I dropped it few days ago and now I get Vertical lines on one side of the screen (no scratches). I was wondering if you have any idea how to fix this or get it fixed. I checked Sony's website and they are charging $149 to just have a look at the problem.

Thanks in advance,
-- MK

Sorry for the late reply & to hear your broken LCD. Just got back from 2 weeks overseas vacation. I can replace your LCD for $125 including shipping and 3 month warranty for parts and labor.

[DanT]

Hi Dan,
Camera for NX-80 if any available.

I'll check my stock tomorrow and let you know.

[DanT]

mackrack5, I have one NX73V/U camera module in stock. It is the same camera module as NX-80's, except for the barrel. Instead of metallic gray, it comes with black.

PM/email me if you're still interested and I'll send you pictures of the parts, instruction how to replace the barrel, and the cost.

Edit: MP wise NX73V is lower (0.3) than that of NX80 (1.3). Thanks for the correction, mackrack5.

[cruzinla]

Hi,

Just wondering if you still have the TJ25. My backlight went out and I am trying to find options.

[DanT]

Yes. I have 2.

[kcdavid]

Dan, I want to congratulate you on your business--selling Sony Clie parts. It sounds like great fun and you are doing, one assumes, what you want in your life. I just bought an NX73V (used) and of all my little "gadgets," I like it the best. So, best of luck. :)

[DanT]

Thanks. Enjoy your NX73V.

[Neelix13]

Do you repair NX73v or just sell parts?

[kacsparky]

I have a clie nx80v and the camera is not working . I have another I can salvage for parts is it very complicated to replace the camera cylinder. any help on this would be appreciated I have broken the old one down to a point but I dont know how to remove the camera. any help with the next step or do I need to have an expert look at it Thanks!

[Westie-Lady]

Can 'anybody' provide me with a 'On/Off Slider Button' for my Sony Clie NX73V please. Alternatively if you can give me any information wher I could obtain one, that would be great.

[DanT]

Do you repair NX73v or just sell parts?

Both. If I can that is.

[bmiddaugh]

DanT
You wouldn't happen to have anymore compatible NX80V cameras would you.
Yea, I have the common dead cam problem. :rolleyes:

[DanT]

I have NX73V camera if want to try it out.

[pdatester]

DanT
Would you by any chance still have a replacement LCD screen for the Clie NX70V (I lost responsiveness to the digitizer)? If not, do you know the part number (Sony or OEM)? Is it really the same screen than the one found on the NR70 model? Thanks very much in advance for your precious help!

[DanT]

Yes I have one for $125.

[pdatester]

Yes I have one for $125.

Thanks for your quick reply and for the good news! I have a few more (technical) questions, so I sent you a PM.

[Edlin]

Hey DanT,
Are you still in business?
I wouldnt mind getting my old NX80 back to working, (digitiser problem) and have a TH55 with working camera and cracked screen that might be good for parts.

[DanT]

Yes I'm, but I don't have NX80 digitizer. :(

[Edlin]

Drats. Thanks for the reply.

[Yezok]

Do you have a NX70V/U camera and spare ribbon cable I need both

[DanT]

Do you have a NX70V/U camera and spare ribbon cable I need both

Sorry I'm out of the camrea and ribbon cable. i do have the an excellent condition NX70V/U with new battery for sale. If any one interested, just send me a PM.

[jwsp]

Hey, seeing this thread reminded me that I used to love my NX70v, I got it out and it's in perfect condition. I feel like getting it back into action, but I've lost the software disk. Is it possible to download this or buy a CD anywhere? Thanks.

[rdiheath]

mrandersonmd.com

[zefirostrike]

hi, a cuestion have datasheet of palms? PEG-NX70V

mi battery died this week, 5 minutes whit a movie in tcmp and empty,
looking in mi celular, samsung sgh-c406 i see a similar battery of 3.7v standar

i live in argentina and here cant buy a original battery of sony clie

, and think, meybe if change the cable adaptor... ,work, whit a battery similar..
and
i open the battery bay, disconect the battery, and des-Soldering the cable,
Soldering in the other battery and work fine,

in these moment im happy :D use the palm a our more, but need the battery in the cellular phone =/


i say, well now need a other cellphone battery or similar

wen back to soldering the old battery, and conect.
not work more :/

the conections + and - are fine, but not work...
meybe make a short circuit? :S

=(

i test in base of palm and work, turn on, but if take it, out of base

shut down in the instant...
as a hard reset, , clear mem etc.

i see wen put in base of palm , not see the orange led-ligth in power buton of "charge"

only see a green , color :/

the palm , not recognize the battery =( i test the battery of cell again , but not work..

you know that could happen?

now only tink , make and cable, to a battery to a pins 13 and 11 of conector , to use a battery =/

i see a similar to termocuple metals, whith a conector of battery.

know if have fuse, or what component cant died if make a shortcircuit ? :/

[gdawg300]

DanT: quick question for you, need a new screen for my Nz-90? With the parts you have is it the whole screen with the case of just the monitor/screen part?? I have a cellphone repair guy says will replace for me if get the part or old unit??

Gdawg

[DanT]

Sorry for the delay response. I don't have the LCD for NZ90 for the moment. If I do later, I'll post it here.

Thanks for your inquiry.

[rebeccaedith]

Hi, I have my Clie Sony NX70V/U and when i try to turn it on, there is no screen display. Can i still fix it? I need it since I have my lots of files here stored.

thnx

[rebeccaedith]

Hello Dan T,

I need some help of my Sony Clie NX70V/U, no screen display come out if i turn it on, can i still fix it?

Thnx

[rebeccaedith]

you can reply me at my yahoo id at rebfreppon@yahoo.com, sionce i have just open my account here and need to wait the activation.

[DanT]

Yes. Please check your PM and email. :)

[gdawg300]

Sorry for the delay response. I don't have the LCD for NZ90 for the moment. If I do later, I'll post it here.

Thanks for your inquiry.

Thks Dan,
are the screens interchangeable with older units like, 70 or 80 versions... They look very close to size? any recommendations on best clie's??? thinking about ux40-50's but they have different screens and wondering about battery life. I have 3 bat's, nice cover, and all the extra'z for the nz90.

Thx
Gdawg

[Neelix13]

I have an NX73 and my power button stopped working while the device was in hold. After 3 months of not being able to find the correct screwdriver to open it up, I pried the button off and used a paperclip to turn it on. I now use the datebook button to power up, and a program called Hi-Launcher to turn it off. Do you know the correct screwdriver? BTW I've been looking into TH55 lately. I can hardly wait till someone puts one on craigslist.

[DanT]

Thks Dan,
are the screens interchangeable with older units like, 70 or 80 versions... They look very close to size? any recommendations on best clie's??? thinking about ux40-50's but they have different screens and wondering about battery life. I have 3 bat's, nice cover, and all the extra'z for the nz90.

Thx
Gdawg

I have LCD for NZ90 now and can replace your LCD or exchange your broken NZ90 with an excellent condition TH55 for addition $. Just send me a PM.

[DanT]

I have an NX73 and my power button stopped working while the device was in hold. After 3 months of not being able to find the correct screwdriver to open it up, I pried the button off and used a paperclip to turn it on. I now use the datebook button to power up, and a program called Hi-Launcher to turn it off. Do you know the correct screwdriver? BTW I've been looking into TH55 lately. I can hardly wait till someone puts one on craigslist.

The screwdriver is a 5-star 360/x50 HFA tool. You can get it on ebay.

I have 6 TH55s (/U, /E1, /E2) in excellent conditions. Just PM me if you are interested to buy one of them.

[DanT]

I opened up my NZ90 LCD and studied it. I think with a minor modification you can use the LCD from NX73V/U. It just a matter of removing the 4 hard button on the LCD frame off the front of the LCD and peeling off the ribbon cable connector for the hard buttons that is glued to the back of the NX73V/U LCD. The NZ90 cable connector is bolted on to the bottom of its LCD frame.

NX80V/U LCD may have the same setup as NX73V/U.

Good luck!

[amflores72]

Dan,

My children recently broke the screen from my old TH-55, which by the way had turned into a great gaming unit for them. Do you have the replacement screen? It doesn´t seems that the digitizer has been damaged. Thanks for your help.

[DanT]

Sorry to hear about the broken LCD. Yes I do have replacement screen. Just send me a PM if you want me to replace it.