Can't remove dust in T|T, digitizer removed already!

[Clocker]

http://img81.imageshack.us/img81/8391/cimg7231mediumqp1.jpg


I peeled off the digitizer already but the dusts are under another layer!

How do I remove them?

[Romeol]

Maybe dismantle those and take it out then. There are bunches of little sheets of stuff under there. Don't know if you'll be able to piece it together and use it though.

[raspabalsa]

I would not recommend taking the screen apart. I tried it on a Treo 600 screen (it had the orange blob problem), sort of an experiment to see if it was possible to clean the blobs and re-assemble the screen. I ended with a lot of thin layers of adhesive plastic, all bent out of their flat shape, and with much more dust than in the beginning. Screen still worked, but the image was distorted and colors washed out.

[yoovee]

I'd listen to raspabalsa.
My experience is much less severe - I only wanted to wash my washable screen protector...ended up with loads of water stains, dust, tons of lint and much worse condition than what I started with. It was a long time ago on an older device. I finally bought another protector & decided to live happily with whatever cought in it.
On an even older device, a Palm III my brother gave me, I had an "internal" dust particle which I greeted hello every morning & never even dreamed of getting out.
I know how it feels - you probably already know you've gone too far & can't or don't want to give up, but don't learn other people's experience in the hard way...