Want to buy NX80v

[mykelfurman]

I sold my NX80v a while back. My TH55 is about to kick the bucket. Needs a new battery is all. But if I'd really like to get a NX80v again.

Does ANYONE know WHERE I could BUY one? EBAY is fresh out. :D

Email me at mykfurman@gmail.com

Thanks. I'm an IT guy so I should have something you would like to trade if cash just doesn't do it for you. :rolleyes:

[guysoft]

I sold my NX80v a while back. My TH55 is about to kick the bucket. Needs a new battery is all. But if I'd really like to get a NX80v again.

Does ANYONE know WHERE I could BUY one? EBAY is fresh out. :D

Email me at mykfurman@gmail.com

Thanks. I'm an IT guy so I should have something you would like to trade if cash just doesn't do it for you. :rolleyes:

i just got a NX80V from eBay just a month ago, they are not fresh out. but you will have to wait until there is a bid. just enter daily, and search for under "clie". when you find one add it to your watch list. there should appear at least once a week , and the cost is about 200$.

Hope i helped.

[Wytnucls]

Remember that a second-hand NX80 will have a weakened power switch. If you don't mind some DIY, open it up and epoxy the plastic toggle arms, to make them stronger before the bits break off for good!

[guysoft]

The power switch is fine for me.
How can i strengthen the hinges then?

Remember that a second-hand NX80 will have a weakened power switch. If you don't mind some DIY, open it up and epoxy the plastic toggle arms, to make them stronger before the bits break off for good!

[Wytnucls]

1. Open the case (Search this site for the procedure)
2. Pop out the power switch carefully
3. Spread some Epoxy over the switch arms at the attachment points (where they normally break off) to make them thicker and stronger ( Magnifying glass would be handy at this stage!)
4. Let dry
5. Reassemble

Mine broke off a while ago, I had to glue a metal piece to the switch to repair it. I cannot use the 'Hold' position anymore though...

It seems stupid to fix something that is not broken, but it becomes a real hassle when it eventually breaks off!

[guysoft]

1. Open the case (Search this site for the procedure)
Mine broke off a while ago, I had to glue a metal piece to the switch to repair it. I cannot use the 'Hold' position anymore though...

It seems stupid to fix something that is not broken, but it becomes a real hassle when it eventually breaks off!


i meant how to fix the hinges of the rotating screen.

[Wytnucls]

If you need to fix the play in the screen swivel pin, do a search as it may have been addressed already. Same for the left and right side hinges.
My screen is not as tight as when I got it two years ago, but the extra play is still bearable.
Good luck

[kiteandcamera]

I sold my NX80v a while back. My TH55 is about to kick the bucket. Needs a new battery is all. But if I'd really like to get a NX80v again.

Does ANYONE know WHERE I could BUY one? EBAY is fresh out. :D

Email me at mykfurman@gmail.com

Thanks. I'm an IT guy so I should have something you would like to trade if cash just doesn't do it for you. :rolleyes:

Sent you an email on Friday afternoon.

[Semi]

Enforcing the power switch is a good idea, but it may still break, to ensure it may never break until you decide to get a new/better handheld, what you can do is find a program called "Default Capture" on the internet, it's free, it allows you to make capture button as on/off button, and it still allows you to use it to turn on the photo capture program, by setting it to "Short" or "Long" hold of the capture button.