help, zire 72 is unresponsive.

[techno nerd]

k my Z72 doesnt turn on.

i plug the mini usb or power in or both, nothing no respone. obviously hit the power button and it doesn't turn on.

help. it stopped working saturday night.

[firelord901]

have you tried pressing the restart button?

[pgenie]

welco,e Tecno Nerd to 1src,

Try a system reset (http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=59,E=0000000000319309584,K=9714,Sxi=8,useTemplate=Case.tem,CASE=887#system)

[techno nerd]

he he no offense guys, ya i did that.

no matter what i press nothing will happen.

[Romeol]

If you want, I can check it out for you. Simply pay shipping and I will diagnose it. Ever since I bought a lot of used PDA's, I can't get enough of that rush when you open the case!

[Dick Tracy]

Could it be that the battery has been fully drained and that it needs to charge for three (3) hours?

[techno nerd]

didnt i say this already?

it wont charge. or the charge led is broken and it wont turn on while it is chargin.

this is so dumb...omfg. i want my pda back i miss it!!!!!!!!!!!!!

:mad: :( :mad: :( :mad: :( :mad: :(

[ccastiglia]

If you haven't done so already, try an in-cradle reset (http://kb.palmone.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(887)#incradle). Basically, put it in the cradle or connect the charging wire then hit the reset button located on the back of the handheld.

If still no luck, you may have a bad charger; try borrowing one from a friend or possibly visit a store which sells Palm devices and has an open display - you may be able to connect up to one of their chargers just long enough to test.

Carmine Castiglia
InfosystemsPro LLC (http://www.infosystemspro.com)
PalmOS apps for engineers and machinists; replacement screws for Tungsten T / T2 / T3 too!